• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Remote with two crystals 10.000mhz and 7.3728
#1
Hi, I am new here and looking for a little guidance.

I would like to use a Raspberrypi3 with AI to voice command the seven different remote functions. (One button is a reset button)

Using pilight and a Rpi3, I am able to receive signals from the remote with a cheap 433 MHz receiver, albeit with some noise.

The codes I get with pilight-receive seem to be either rolling or maybe the excessive noise is causing an unstable shift in the coding; however it does seem to have a pattern to the number shifting.

I can get consistent coding from my wireless temp sensor, a smoke detector and someone's light switches that may not be in my house. Honestly this is somewhat outside of my normal wheel house.

I saw where it was mentioned in another post about hard wiring the remote contact pads to the pi and that is a backup plan.

Has anyone emulated a remote like this, or can point me in the right direction?

Does anyone have thoughts on why the two crystals?

Any comments are very much appreciated and welcome, Thanks so very much.    
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Real 433Mhz Remote is disturbed by pilight service henne111 2 139 10-06-2019, 06:18 PM
Last Post: wo_rasp
  [solved] kwmobile: repeating the remote signal doesn't work dawncrow 9 937 10-25-2018, 03:46 PM
Last Post: dawncrow
  Howto use GT-FSA-04 sockets with GT-3000 remote zackdvd 0 360 04-30-2018, 09:43 PM
Last Post: zackdvd
  deleyCON remote plug socket (arctec_screen_old protocol) itsMe 6 1,181 04-01-2018, 08:35 PM
Last Post: itsMe
Lightbulb pilight not picking up KaKu remote presses rajd 13 5,189 02-07-2017, 02:22 PM
Last Post: wo_rasp
  KaKu ATMT-502 remote & pilight? rajd 4 1,866 11-30-2016, 05:05 PM
Last Post: rajd
  pilight-receive with intertechno ITZ-500 remote control Pik 3 2,303 08-22-2016, 09:16 AM
Last Post: Pik
  KaKu YCT-102 remote unit and id Blacklight 2 1,553 08-14-2016, 08:02 PM
Last Post: Blacklight
Question brennenstuhl RCS 1000SN remote control not recognized by receiver droptix 15 5,254 08-01-2016, 02:06 PM
Last Post: droptix
Tongue Trying to activate relay/gpio with remote control 433 mhz Horst 3 2,435 02-15-2016, 05:35 PM
Last Post: Niek

Forum Jump:


Browsing: 1 Guest(s)