• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
pilight Error : default_sa_restorer_v2 & CPU High
#1
My pilight session halted on 24th of June around 14:00.

Raspberry Pi Model B Rev. 2.0 512MB
Linux raspberrypi 4.4.11+ #888 Mon May 23 20:02:58 BST 2016 armv6l GNU/Linux
I'm running a manually compiled version. Which i cloned from development on 21st of june around 7:44am localtime the netherlands.
I'm running it with an altered alecto_wx500 protocol (enabling rain meter)

Only enabled these protocols:
Code:
Webserver
Events
Alecto_ws170
Alecto_wx500
BMP180
CPU temp
Datetime
DS18B20
DS18S20
DHT11
DHT22
Generic Switch
Kaku switch
kaku switch old
Ping
Program
Raw
Sunriseset
Hardware 433 GPIO
Hardware 433 LIRC

I've got a filter installed and DS18B20 and BP180 attached.
So i've gone to go through the logs

Message in pilight.err
Code:
[Jun 24 14:02:21:624575] pilight-daemon: -- STACKTRACE (5 FRAMES) --
[Jun 24 14:02:22:266767] pilight-daemon: __default_sa_restorer_v2       ip = 0xb6d45180, sp = 0x*******
[Jun 24 14:02:22:797679] pilight-daemon: broadcast                      ip =    0x*******, sp = 0x*******
[Jun 24 14:02:23:136320] pilight-daemon: start_thread                   ip = 0xb*******, sp = 0xb2*******
[Jun 24 14:02:23:411186] pilight-daemon: clone                          ip = 0x*******, sp = 0x*******
(i've replace the adresses with * )

Messages in pilight.log that get my attention
Code:
[Jun 22 02:21:44:636190] pilight-daemon: WARNING: (webserver) could not read /usr/local/share/pilight//nice ports,/Trinity.txt.bak
(not the cause of crash.. but what should i do with it?


Found it:
Code:
[Jun 24 12:02:03:371111] pilight-daemon: WARNING: cpu usage too high 88.399633%
[Jun 24 12:02:03:735340] pilight-daemon: WARNING: checking again in 10 seconds
[Jun 24 12:02:15:947036] pilight-daemon: cpu usage still too high 80.356485%, stopping
[Jun 24 12:02:16:349919] pilight-daemon: INFO: removed stale pid_file /var/run/pilight.pid


How come it remains on high CPU?
Does does it halt on pilight CPU usage or total CPU usage?
 
Reply
  


Messages In This Thread
pilight Error : default_sa_restorer_v2 & CPU High - by Tommybear1979 - 06-28-2016, 08:06 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  rpi3 Buster Compile Error Nikau 4 64 08-18-2019, 09:08 AM
Last Post: curlymo
  cpu usage too high 93.651156%, will abort when this persists DieterK 1 46 08-13-2019, 05:43 PM
Last Post: curlymo
  pilight Nano USB interface curlymo 228 94,078 07-10-2019, 06:14 PM
Last Post: curlymo
  ERROR: The Broadcom 2835 GPIO 0 is not set to output mode stuckinger 10 618 05-07-2019, 09:11 PM
Last Post: curlymo
  problems compiling pilight on Odroid C2 WitchDoctor 101 8,667 03-14-2019, 09:01 PM
Last Post: curlymo
  High cpu usage Dergo 1 217 02-23-2019, 04:31 PM
Last Post: curlymo
  pilight 8 what chages for custom protocols? polo 11 2,657 02-15-2019, 06:22 PM
Last Post: polo
  v8.1.3 compile error without https fourty2 3 422 11-21-2018, 08:02 PM
Last Post: fourty2
  Assert error in v8.1.3-nightly-d2ee2d0d Ulrich.Arnold 4 429 10-24-2018, 09:28 PM
Last Post: curlymo
  pilight-debug shows nothing minhdomanh 3 470 10-18-2018, 07:01 AM
Last Post: felfert

Forum Jump:


Browsing: 1 Guest(s)