• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Passive Component Band-pass filter
#9
No ,a 433 MHz Filter is not sufficient, as OOK modulation of a 433 MHz carrier is used and as we do not deal with sinus wave signals either you could use the 5th or 7th harmonic of a pulse duration, however due to the fact that some devices have a pulse duration of 80 mSec, others of 2mSec and the minimum is approximately 0,15 mSec you face some difficulties with a proper analog circuit design.
IMHO on a Pi2 or Pi3 it is best to operate the LPF in no filter mode as sufficient CPU power is available.

Gesendet von iPhone mit Tapatalk
 
Reply
  


Messages In This Thread
Passive Component Band-pass filter - by ripper121 - 11-28-2017, 04:36 PM
Passive Component Band-pass filter - by wo_rasp - 12-16-2017, 01:38 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Bandpass filter problem mayonezo 16 9,826 07-21-2022, 11:14 PM
Last Post: DashWUsero
Rainbow Lowpass filter - how DOES it work? DE8MSH 16 10,691 04-17-2020, 10:13 PM
Last Post: curlymo
  Filter kit in 315 receiver? ceandre 1 2,353 04-14-2017, 10:10 PM
Last Post: wo_rasp
  Low Pass Filter and Receiver in Series? re-post Gustavo Woltmann 1 2,571 03-08-2017, 05:25 PM
Last Post: pilino1234
  Filter settings in config.json Saiyato 100 61,782 02-22-2017, 08:24 AM
Last Post: wo_rasp
  Low Pass Filter and Receiver in Series? Hauke 3 5,019 08-30-2016, 08:25 AM
Last Post: wo_rasp
  New filter version curlymo 0 2,490 04-02-2016, 08:05 AM
Last Post: curlymo
  Band-pass filter parts curlymo 60 90,338 01-08-2016, 12:23 AM
Last Post: gneandr
  low pass filter francois.leprieur 3 4,301 12-20-2015, 10:18 AM
Last Post: curlymo
  Low-pass Filter wiring hazzard 4 4,496 11-15-2015, 08:35 AM
Last Post: woutput

Forum Jump:


Browsing: 1 Guest(s)