• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Basic testing pilight hardware
#1
Hi,

Recently I have bought and soldered the full PCB from the pilight store and mounted it on the GPIO pins of my Pi3B+. After that I have changed the config to reflect that I have a Pi 3 and added the gpio430 hardware settings with 0 and 1 that should correspond with pins 11 & 12 that should be the ones the PCB is wired to.

My next step would be to find put if the hardware is working but this proves to be much harder than expected. I have tried running pilight-debug and it does sporadically receive some data, but when I use my APC3 kaku remote it does not react at all.  

What would be a good way to test if the PCB has been soldered correctly and the hardware is working? Are there some sensible diagnostical steps?

Kind regards,

Dirk
 
Reply
  


Messages In This Thread
Basic testing pilight hardware - by dirk - 06-05-2018, 03:18 PM
RE: Basic testing pilight hardware - by curlymo - 06-05-2018, 10:11 PM
RE: Basic testing pilight hardware - by dirk - 06-06-2018, 08:33 AM
RE: Basic testing pilight hardware - by curlymo - 06-06-2018, 05:28 PM
RE: Basic testing pilight hardware - by dirk - 06-07-2018, 12:22 PM
RE: Basic testing pilight hardware - by curlymo - 06-07-2018, 06:09 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  [Fixed] RaspberryPi4 pilight 8.1.5 - Send isn't working DominikB1993 4 39 10-18-2019, 10:25 PM
Last Post: DominikB1993
  Real 433Mhz Remote is disturbed by pilight service henne111 2 156 10-06-2019, 06:18 PM
Last Post: wo_rasp
Tongue (solved) pilight 8.1.5-1-gc0a175e0 Chrashes fleisch 5 578 10-03-2019, 01:15 PM
Last Post: fleisch
  Starting pilight on boot: "cannot bind to the SSDP multicast network" pilino1234 4 343 09-29-2019, 02:08 PM
Last Post: tomk
  pilight for Raspbian Buster (raspberry pi 4) ? starob 29 2,438 07-15-2019, 08:45 PM
Last Post: curlymo
  pilight-receive Filteroption not working Alex 2 568 07-14-2019, 08:35 AM
Last Post: Alex
  pilight usb nano format conversion ettman8 2 452 07-14-2019, 08:32 AM
Last Post: curlymo
  pilight 8.1.4 crashes after some hours Ulrich.Arnold 47 2,689 06-29-2019, 08:58 PM
Last Post: curlymo
  Raspberry PI, gpio-ir-tx and pilight not starting lordslash 5 862 06-11-2019, 05:19 PM
Last Post: curlymo
  pilight fails starting on boot Alex 5 752 06-09-2019, 06:02 PM
Last Post: curlymo

Forum Jump:


Browsing: 1 Guest(s)