The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 895 - File: showthread.php PHP 7.3.14-1~deb10u1 (Linux)
File Line Function
/showthread.php 895 errorHandler->error



  • 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
pilight detect wrong protocol quigg_gt9000 is not quigg_gt1000
#1
Exclamation 
Hello,

I use a Raspberry Pi 3 with 433,92MHz receiver and sender modul.
With pilight I received codes, but the 433,92MHz socket dont switch on/off over Raspberry Pi 3.

So I search in this forum and see, that pilight get the wrong protokoll. pilight says my remote use "quigg_gt9000", but it used definitly "guigg_gt1000".

Here is a link to the thread:
Code:
forum.pilight.org/showthread.php?tid=3203&highlight=quigg_gt1000


This is one code I got with "pilight-receive" command:
Code:
{
      "message": {
              "binary": "100001000100111110110000",
              "id": 526275,
              "unit": 0,
              "state": "on"
      },
      "origin": "receiver",
      "protocol": "quigg_gt9000",
      "uuid": "0000-b8-27-eb-f4dd1e",
      "repeats": 1
}

With this code my 433,92MHz all socket's switch on:
Code:
sudo pilight-send -p quigg_gt1000 -u 0 -s -t

And with this code all socket's switch off:
Code:
sudo pilight-send -p quigg_gt1000 -u 0 -s -f

The problem is, that all sockets react to this code and in pilight with the pilight-receive command I dont get the correct "id" or/and "unit".

So I tried all "combinations" of the protocoll, but then I see maybe a BUG in pilight.
In the helpfile I see, that I can use 0 to 15 ids with the -i command. But by the id 2 or other ids I get every time the ERROR "no random code avaiable". But I dont use the "-n" command. So I dont know, what is going wrong.
Code:
pi@PCT-Pi-Test:~ $ sudo pilight-send -p quigg_gt1000 --help
Usage: pilight-send -p quigg_gt1000 [options]
        -H --help                      display this message
        -V --version                   display version
        -p --protocol=protocol         the protocol that you want to control
        -S --server=x.x.x.x            connect to server address
        -P --port=xxxx                 connect to server port
        -C --config                    config file
        -U --uuid=xxx-xx-xx-xx-xxxxxx  UUID

       [quigg_gt1000]
        -t --on        send an on signal
        -f --off       send an off signal
        -u --unit=unit control a device with this unit code [0..3]
        -i --id=id     control a device with this id [0..15]
        -a --all       control all devices with this id
        -s --super     control all devices regardless of id
        -n --num       optional use random (super)code sequence num 0..3 (7)
pi@PCT-Pi-Test:~ $ sudo pilight-send -p quigg_gt1000 -t -u 0 -i 0 -a
pi@PCT-Pi-Test:~ $ sudo pilight-send -p quigg_gt1000 -f -u 0 -i 0 -a
pi@PCT-Pi-Test:~ $ sudo pilight-send -p quigg_gt1000 -t -u 0 -i 0 -a
pi@PCT-Pi-Test:~ $ sudo pilight-send -p quigg_gt1000 -t -u 1 -i 0 -a
pi@PCT-Pi-Test:~ $ sudo pilight-send -p quigg_gt1000 -f -u 1 -i 0 -a
pi@PCT-Pi-Test:~ $ sudo pilight-send -p quigg_gt1000 -t -u 1 -i 0 -a
pi@PCT-Pi-Test:~ $ sudo pilight-send -p quigg_gt1000 -t -u 2 -i 0 -a
pi@PCT-Pi-Test:~ $ sudo pilight-send -p quigg_gt1000 -t -u 3 -i 0 -a
pi@PCT-Pi-Test:~ $ sudo pilight-send -p quigg_gt1000 -t -u 4 -i 0 -a
pi@PCT-Pi-Test:~ $ sudo pilight-send -p quigg_gt1000 -t -u 0 -i 1 -a
pi@PCT-Pi-Test:~ $ sudo pilight-send -p quigg_gt1000 -t -u 0 -i 2 -a
[Aug 12 08:31:52:822454] pilight-send: ERROR: quiggGT1000: no random code available for this switch action
pi@PCT-Pi-Test:~ $ sudo pilight-send -p quigg_gt1000 -u 0 -s -t
pi@PCT-Pi-Test:~ $ sudo pilight-send -p quigg_gt1000 -u 0 -s -f

Maybe somebody have the same problem or know a solution for my problem.

Thank you in advance!

Best regards
Pascal
 
Reply
  


Messages In This Thread
pilight detect wrong protocol quigg_gt9000 is not quigg_gt1000 - by PCT - 08-12-2018, 09:55 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  pilight-control TML 13 315 05-27-2020, 07:51 AM
Last Post: curlymo
  API Requests by HTTP from other devices fore use in pilight scootermacro 2 154 05-10-2020, 08:19 AM
Last Post: scootermacro
  pilight-send seems successful but doesn't actually send RF signal ayeyebrazov 37 2,008 03-31-2020, 01:02 PM
Last Post: curlymo
  pilight 8.1.5 not working on Raspberry pi after reboot beejayf 4 505 03-08-2020, 12:14 AM
Last Post: beejayf
  pilight cpu usage possibly associated with noticeable sluggishness? hepcat72 4 520 01-28-2020, 08:02 PM
Last Post: hepcat72
  apt.pilight.org stable Release' is not signed. thomasol 2 645 01-23-2020, 11:34 PM
Last Post: thomasol
  pilight and SIGNALduino cc1101 Caleus 0 438 01-19-2020, 09:13 AM
Last Post: Caleus
  filter stopped working after update to pilight 8.1.5 zlin50 19 1,340 01-03-2020, 02:15 PM
Last Post: curlymo
Question [Solved] Openweathermap with pilight 7.0-40 doesn't work Seebueb 2 525 01-01-2020, 06:45 PM
Last Post: Seebueb
  [Solved] Strange receive problem with 433Mhz Receiver and pilight 8.1.5 vanillaice30 15 1,413 12-18-2019, 11:09 AM
Last Post: vanillaice30

Forum Jump:


Browsing: 1 Guest(s)