• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


QUIGG (Globaltronics/ALDI)
#31
(06-12-2014, 03:51 PM)RinusW Wrote: Yes, I should update my repository on a regular base. But I didn't, so I'm talking about V4.
As far as I know, the 7008AS switches do not have a dim function. And the manual of the GT-7000 remote, that can be found here http://www.gt-support.de/files/IM_GT-700...SI-04a.pdf, indicates that the “dim key”doesn't have a real function.
With the 7008AD and the GT-FSi-04d ithis button the two buttons in row 5 activate the dimmer within these switches.
[/quote]
(06-12-2014, 03:51 PM)RinusW Wrote: Sorry, I forgot to say that I was looking at the pulses produced by the remote control unit and not by the sender of pilight. Some other numbers measured with my scope: the pulse sequence has a duration of 41,5 ms and a repetition time of 122,5 ms, which means that the footer is 81 ms. Since the pulse sequence always has 21 short and 20 long pulses, and when we assume that a long pulse is twice as width as a short pulse, the duration of 61 short pulses therefore is equal to 41,5 ms. This gives 680,3 us for a short pulse and 1360,7 us for a long pulse. But probably 700 and 1400 us will work fine too.
The values are the same then the ones i have measured. My switches here will work with short pulses in the range of 620 to 950µS and the learning mode requires a minimum pulse length of appr. 6000µS.

(06-12-2014, 03:51 PM)RinusW Wrote: If you agree that bit 1..11 are the actual device-id bits and bit 12 is an odd-parity bit over the bits 1..12 (i.e. the device-id bits) then it is correct that the last bit (bit 20) is an even parity bit over bits 13..20. And since bits 1..12 have an odd parity, this is the same as saying that bit 20 is an odd parity bit over all bits 1..20.
My GT-7008AS switches will not switch reliable when not both parity bits are correct. So the effective id-range of these switches is 11 bits or 0..2047.
Actually, at least with my GT-7000 and an 7008AD switch i do not. I can not confirm the following binary strings for the ID:
1011 0000 0000 - initial value, the GT-7000 is actually incrementing that value in the following manner:
0111 0000 0000, 1111 0000 0000, 0000 1000 0000 .... until 1111 1111 1111
and than it rolls over ( i do not know if it starts at 0000 0000 0000, as i did not catch the exact roll over)
The following is an output from my current protocol driver to turn Unit 1 off:
id: 1537 unit code: 1 all: 0 state: 0 dimm: 0 parity: 0
011000000001 10 0 0 0 01 0

(06-12-2014, 03:51 PM)RinusW Wrote: I didn't study the function of the so-called dim key, and I didn't implement any special functionality in my 7008 protocol either, because the GT-7008AS switch doesn't have a dim function, and doesn't react when pressing this key. And according to the manual mentioned earlier the GT-FSI-4a should not either.
The GT-FSi-4d manual mentions it.

(06-12-2014, 03:51 PM)RinusW Wrote: My measurements showed that the remote control GT-7000 repeats the command only after 122 ms. This is a repetition frequency of 8 per second. 4 pulses is then equal to 500 ms.
My advice is: make sure that both parity bits are correct. Only then the switch will work in a reliable way. I can operate my switch from pilight with just a single pulsetrain, i.e. no repetition at all.
As said before any footer above 6000 does work for me on the real switch, the problme here is the way pilight operates, it relies on a "footer to short pulse duration" relation to determine the protocol type.

I'll keep the Wiki updated with any new findings.
 
Reply
  


Messages In This Thread
QUIGG (Globaltronics/ALDI) - by neevedr - 12-15-2013, 02:02 PM
RE: QUIGG (Globaltronics/ALDI) - by curlymo - 12-15-2013, 09:58 PM
RE: QUIGG (Globaltronics/ALDI) - by neevedr - 12-28-2013, 05:14 PM
RE: QUIGG (Globaltronics/ALDI) - by curlymo - 12-29-2013, 12:21 AM
RE: QUIGG (Globaltronics/ALDI) - by neevedr - 12-30-2013, 05:38 PM
RE: QUIGG (Globaltronics/ALDI) - by curlymo - 12-30-2013, 05:44 PM
RE: QUIGG (Globaltronics/ALDI) - by neevedr - 12-30-2013, 06:13 PM
RE: QUIGG (Globaltronics/ALDI) - by curlymo - 12-30-2013, 06:19 PM
RE: QUIGG (Globaltronics/ALDI) - by neevedr - 12-31-2013, 12:14 AM
RE: QUIGG (Globaltronics/ALDI) - by curlymo - 12-31-2013, 12:30 AM
RE: QUIGG (Globaltronics/ALDI) - by neevedr - 12-31-2013, 12:47 AM
RE: QUIGG (Globaltronics/ALDI) - by curlymo - 12-31-2013, 12:52 AM
RE: QUIGG (Globaltronics/ALDI) - by neevedr - 12-31-2013, 12:59 AM
RE: QUIGG (Globaltronics/ALDI) - by curlymo - 12-31-2013, 01:50 AM
RE: QUIGG (Globaltronics/ALDI) - by neevedr - 12-31-2013, 09:45 AM
RE: QUIGG (Globaltronics/ALDI) - by curlymo - 12-31-2013, 11:13 AM
RE: QUIGG (Globaltronics/ALDI) - by neevedr - 01-05-2014, 12:45 PM
RE: QUIGG (Globaltronics/ALDI) - by curlymo - 01-05-2014, 12:47 PM
RE: QUIGG (Globaltronics/ALDI) - by curlymo - 01-05-2014, 07:04 PM
RE: QUIGG (Globaltronics/ALDI) - by neevedr - 01-17-2014, 02:56 PM
RE: QUIGG (Globaltronics/ALDI) - by curlymo - 01-17-2014, 03:42 PM
RE: QUIGG (Globaltronics/ALDI) - by neevedr - 01-17-2014, 05:04 PM
RE: QUIGG (Globaltronics/ALDI) - by curlymo - 01-17-2014, 06:11 PM
RE: QUIGG (Globaltronics/ALDI) - by neevedr - 01-17-2014, 06:18 PM
RE: QUIGG (Globaltronics/ALDI) - by wo_rasp - 04-12-2014, 01:58 AM
RE: QUIGG (Globaltronics/ALDI) - by RinusW - 06-11-2014, 10:46 PM
RE: QUIGG (Globaltronics/ALDI) - by wo_rasp - 06-12-2014, 12:29 AM
RE: QUIGG (Globaltronics/ALDI) - by RinusW - 06-12-2014, 03:51 PM
RE: QUIGG (Globaltronics/ALDI) - by wo_rasp - 06-13-2014, 03:58 PM
RE: QUIGG (Globaltronics/ALDI) - by curlymo - 06-11-2014, 11:01 PM
RE: QUIGG (Globaltronics/ALDI) - by RinusW - 06-12-2014, 11:02 AM
RE: QUIGG (Globaltronics/ALDI) - by curlymo - 06-13-2014, 04:07 PM
RE: QUIGG (Globaltronics/ALDI) - by RinusW - 06-15-2014, 01:01 PM
RE: QUIGG (Globaltronics/ALDI) - by RinusW - 06-15-2014, 10:54 PM
RE: QUIGG (Globaltronics/ALDI) - by curlymo - 06-15-2014, 11:06 PM
RE: QUIGG (Globaltronics/ALDI) - by wo_rasp - 06-16-2014, 03:41 PM
RE: QUIGG (Globaltronics/ALDI) - by curlymo - 06-16-2014, 04:02 PM
RE: QUIGG (Globaltronics/ALDI) - by wo_rasp - 07-03-2014, 10:27 AM
RE: QUIGG (Globaltronics/ALDI) - by wo_rasp - 06-29-2014, 08:41 PM
RE: QUIGG (Globaltronics/ALDI) - by gunbaum - 12-16-2014, 10:06 PM
RE: QUIGG (Globaltronics/ALDI) - by martenjacobs - 12-16-2014, 10:26 PM
RE: QUIGG (Globaltronics/ALDI) - by wo_rasp - 12-30-2014, 07:18 PM
RE: QUIGG (Globaltronics/ALDI) - by wo_rasp - 12-16-2014, 11:54 PM
RE: QUIGG (Globaltronics/ALDI) - by gunbaum - 12-17-2014, 12:06 AM
RE: QUIGG (Globaltronics/ALDI) - by wo_rasp - 12-17-2014, 11:40 AM
RE: QUIGG (Globaltronics/ALDI) - by Luppie - 01-11-2015, 02:02 PM
RE: QUIGG (Globaltronics/ALDI) - by gunbaum - 12-17-2014, 03:19 PM
RE: QUIGG (Globaltronics/ALDI) - by wo_rasp - 12-17-2014, 10:36 PM
RE: QUIGG (Globaltronics/ALDI) - by curlymo - 01-11-2015, 02:05 PM
RE: QUIGG (Globaltronics/ALDI) - by wo_rasp - 01-12-2015, 10:01 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Quigg GT-1000 maartenh 55 29,470 07-28-2020, 03:21 PM
Last Post: pgScorpio
  QUIGG GT9000 (Globaltronics/ALDI) NeoFlo 140 81,072 01-07-2020, 04:03 PM
Last Post: aP7D1CKD
  [Solved] Quigg GT-1000 leaving transmitter ON VrahoK 11 1,074 12-22-2019, 12:17 AM
Last Post: VrahoK
  Brennenstuhl RCR CE1 1011 with QUIGG GT9000 Protocol scootermacro 1 711 06-27-2019, 06:20 PM
Last Post: scootermacro
  Weather Station Globaltronics GT-WT-01 Prutsky 13 8,543 04-09-2018, 07:34 PM
Last Post: NevelS
  quigg gt7000 Dimmer wchristi 11 9,303 04-30-2015, 09:25 AM
Last Post: wo_rasp
  Quigg Screens curlymo 6 4,655 01-31-2015, 07:33 PM
Last Post: curlymo

Forum Jump:


Browsing: 1 Guest(s)