• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


[Fully Supported] Elro 800 Series
#1
Hello,
I bought a power outlets (and a dimmer) Set of the Elro Home Easy collection. This one
Unfortunately I can only turn the outlets on/off with the raw code, so with pilight-send -raw p -c "..."
With the protokoll pollin or elro_he, the systemcode and the unitcode it doesn't work.
pilight-send-p pollin -s 30 -u 10 -t respectively pilight-send -p elro_he -s 30 -u 10 -t

Attached all the data from pilight-receive, pilight-debug switch 1 to 3, pilight-learn and pilight-daemon -D
Code:
Schalter 1 ON

{
        "code": {
                "id": 62596,
                "unit": 1,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "arctech_switches",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "id": 62596,
                "unit": 1,
                "state": "opened"
        },
        "origin": "receiver",
        "protocol": "arctech_contact",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "id": 62596,
                "unit": 1,
                "state": "up"
        },
        "origin": "receiver",
        "protocol": "arctech_screens",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 10,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 10,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 10,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 10,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 10,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
______________________________________________________________________________________
Schalter 1 OFF

{
        "code": {
                "id": 62596,
                "unit": 1,
                "state": "off"
        },
        "origin": "receiver",
        "protocol": "arctech_switches",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "id": 62596,
                "unit": 1,
                "state": "closed"
        },
        "origin": "receiver",
        "protocol": "arctech_contact",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "id": 62596,
                "unit": 1,
                "state": "down"
        },
        "origin": "receiver",
        "protocol": "arctech_screens",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 10,
                "state": "off"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 10,
                "state": "off"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 10,
                "state": "off"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 10,
                "state": "off"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 10,
                "state": "off"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 2
}
_______________________________________________________________________
Schalter 2 ON

{
        "code": {
                "id": 62596,
                "unit": 2,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "arctech_switches",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "id": 62596,
                "unit": 2,
                "state": "opened"
        },
        "origin": "receiver",
        "protocol": "arctech_contact",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "id": 62596,
                "unit": 2,
                "state": "up"
        },
        "origin": "receiver",
        "protocol": "arctech_screens",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 12,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 12,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 2
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 12,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 12,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 12,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 2
}


___________________________________________________________________________
Schalter 2 OFF

{
        "code": {
                "id": 62596,
                "unit": 2,
                "state": "off"
        },
        "origin": "receiver",
        "protocol": "arctech_switches",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "id": 62596,
                "unit": 2,
                "state": "closed"
        },
        "origin": "receiver",
        "protocol": "arctech_contact",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "id": 62596,
                "unit": 2,
                "state": "down"
        },
        "origin": "receiver",
        "protocol": "arctech_screens",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 12,
                "state": "off"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 12,
                "state": "off"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 2
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 12,
                "state": "off"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
_________________________________________________________________________________
Schalter 3 ON
{
        "code": {
                "systemcode": 30,
                "unitcode": 8,
                "state": "off"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "id": 62596,
                "unit": 3,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "arctech_switches",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "id": 62596,
                "unit": 3,
                "state": "opened"
        },
        "origin": "receiver",
        "protocol": "arctech_contact",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "id": 62596,
                "unit": 3,
                "state": "up"
        },
        "origin": "receiver",
        "protocol": "arctech_screens",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 8,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 8,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 8,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 8,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 2
}
______________________________________________________________
Schalter 3 OFF
{
        "code": {
                "id": 62596,
                "unit": 3,
                "state": "off"
        },
        "origin": "receiver",
        "protocol": "arctech_switches",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "id": 62596,
                "unit": 3,
                "state": "closed"
        },
        "origin": "receiver",
        "protocol": "arctech_contact",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "id": 62596,
                "unit": 3,
                "state": "down"
        },
        "origin": "receiver",
        "protocol": "arctech_screens",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 8,
                "state": "off"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 8,
                "state": "off"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 2
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 8,
                "state": "off"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 3
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 8,
                "state": "off"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 4
}
{
        "code": {
                "systemcode": 30,
                "unitcode": 8,
                "state": "off"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 5
}
{
        "code": {
                "systemcode": 0,
                "unitcode": 0,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "pollin",
        "uuid": "0000-00-00-01-f5f042",
        "repeats": 1
}
Code:
Schalter 1 ON
--[RESULTS]--

hardware:       433gpio
pulse:          7
rawlen:         58
binlen:         14
pulselen:       146

Raw code:
292 1022 292 1022 876 438 292 1022 292 1022 876 438 292 1022 876 438 876 438 876 438 876 438 292 1022 292 1022 292 1022 292 1022 876 438 292 1022 876 438 292 1022 876 438 876 438 292 1022 876 438 1022 438 292 1022 876 438 876 438 292 1022 292 4964
Binary code:
11000110001001
____________________________________________________________
Schalter 1 OFF
--[RESULTS]--

hardware:       433gpio
pulse:          7
rawlen:         58
binlen:         14
pulselen:       147

Raw code:
294 1029 294 1029 882 441 294 1029 294 1029 882 441 882 441 882 441 147 1029 882 441 294 1029 882 441 882 441 882 441 882 441 147 1176 882 441 1029 294 882 441 147 1029 294 1029 294 1176 147 1029 294 1029 147 1029 882 441 882 441 294 1029 294 4998
Binary code:
11000001011101
______________________________________________________________________________________
Schalter 2 ON

--[RESULTS]--

hardware:       433gpio
pulse:          3
rawlen:         58
binlen:         14
pulselen:       147

Raw code:
294 1029 294 1029 882 441 294 1029 294 1029 882 441 294 1029 294 1029 294 1029 882 441 882 441 294 1029 294 1029 882 441 882 441 294 1029 294 1029 882 441 294 1029 294 1029 882 441 294 1029 294 1029 294 1029 294 1029 882 441 294 1029 882 441 294 4998
Binary code:
11111111111111

______________________________________________________________________________________
Schalter 2 OFF

--[RESULTS]--

hardware:       433gpio
pulse:          3
rawlen:         58
binlen:         14
pulselen:       147

Raw code:
294 1029 294 1029 882 441 294 1029 294 1029 882 441 882 441 294 1029 882 441 882 441 294 1029 294 1029 882 441 882 441 882 441 882 441 882 441 882 441 882 441 882 441 882 441 294 1029 882 441 294 1029 882 441 294 1029 294 1029 882 441 294 4998
Binary code:
11111111111111

______________________________________________________________________________________
Schalter 3 ON

--[RESULTS]--

hardware:       433gpio
pulse:          3
rawlen:         58
binlen:         14
pulselen:       147

Raw code:
882 441 882 441 882 441 294 1029 294 1029 882 441 294 1029 294 1029 882 441 294 1029 882 441 294 1029 294 1029 882 441 882 441 882 441 882 441 882 441 882 441 882 441 294 1029 294 1029 882 441 882 441 882 441 294 1029 294 1029 882 441 294 4998
Binary code:
11111111111111

______________________________________________________________________________________
Schalter 3 OFF
--[RESULTS]--

hardware:       433gpio
pulse:          3
rawlen:         58
binlen:         14
pulselen:       146

Raw code:
876 438 876 438 876 438 292 1022 292 1022 876 438 292 1022 292 1022 876 438 292 1022 876 438 292 1022 876 438 292 1022 292 1022 292 1022 292 1022 876 438 876 438 292 1022 876 438 876 438 292 1022 876 438 292 1022 876 438 292 1022 876 438 292 4964
Binary code:
11111111111111
Code:
pilight-learn

--[RESULTS]--

hardware:       433gpio
pulse:          3
rawlen:         50
binlen:         12
plslen:         299

on-off bit(s):  11
all bit(s):     9
unit bit(s):    6 7

Raw code:
897 598 897 299 299 897 299 897 299 897 299 897 299 897 299 897 299 897 299 897 299 897 897 299 299 897 897 299 299 897 897 299 299 897 299 897 299 897 897 299 299 897 897 299 299 897 897 299 299 10166
Raw simplified:
On:     10100101010101010101011001010110010101100110011001
Off:    10100101010101010101011001010110010101100110011001
All:    11100101010101010101011001010101010101011010010101
Unit 1: 10100101010101010101011001010110010101100110011001
Unit 2: 01100101010101010101011001100101010101100110011001
Unit 3: 00100101010101010101011001100110010101100110011001
Binary code:
On:     011110101000
Off:    011110101001
All:    011110111101
Unit 1: 011110101000
Unit 2: 011110011000
Unit 3: 011110001000
Code:
sudo pilight-daemon -D
[May 11 12:24:04:915767] pilight-daemon: DEBUG: ssdp sent search
[ May 11 12:24:05:11283] pilight-daemon: NOTICE: no pilight daemon found, daemonizing
[ May 11 12:24:05:12253] pilight-daemon: INFO: daemon listening to port: 33543
[ May 11 12:24:05:23498] pilight-daemon: DEBUG: new thread lirc, 1 thread running
[ May 11 12:24:05:23971] pilight-daemon: DEBUG: new thread socket, 2 threads running
[ May 11 12:24:05:24331] pilight-daemon: DEBUG: new thread ssdp, 3 threads running
[ May 11 12:24:05:24689] pilight-daemon: DEBUG: new thread sender, 4 threads running
[ May 11 12:24:05:25046] pilight-daemon: DEBUG: new thread broadcaster, 5 threads running
[ May 11 12:24:05:25404] pilight-daemon: DEBUG: new thread updater, 6 threads running
[ May 11 12:24:05:25781] pilight-daemon: DEBUG: new thread 433gpio, 7 threads running
[ May 11 12:24:05:26139] pilight-daemon: DEBUG: new thread webserver daemon, 8 threads running
[ May 11 12:24:05:26498] pilight-daemon: DEBUG: new thread webserver client, 9 threads running
[ May 11 12:24:05:26854] pilight-daemon: DEBUG: new thread webserver broadcast, 10 threads running
[ May 11 12:24:05:27597] pilight-daemon: INFO: new client, ip: 127.0.0.1, port: 49636
[ May 11 12:24:05:27833] pilight-daemon: DEBUG: client fd: 9
[ May 11 12:24:05:28010] pilight-daemon: DEBUG: client id: 1
[ May 11 12:24:05:30284] pilight-daemon: NOTICE: php support disabled due to missing php-cgi executable
[ May 11 12:24:05:32664] pilight-daemon: DEBUG: webserver listening to port 5001
[ May 11 12:24:05:33308] pilight-daemon: DEBUG: ssdp sent search
[ May 11 12:24:05:34059] pilight-daemon: DEBUG: new thread webserver worker #0, 11 threads running
[ May 11 12:24:05:34489] pilight-daemon: DEBUG: ssdp sent notify
[ May 11 12:24:05:34905] pilight-daemon: INFO: client connected, ip 127.0.0.1, port 41576
[May 11 12:24:05:132089] pilight-daemon: DEBUG: socket write succeeded: {"message":"client gui"}

[May 11 12:24:05:132552] pilight-daemon: INFO: new client, ip: 192.168.5.50, port: 45586
[May 11 12:24:05:132728] pilight-daemon: DEBUG: client fd: 16
[May 11 12:24:05:132872] pilight-daemon: DEBUG: client id: 2
[May 11 12:24:05:133145] pilight-daemon: DEBUG: socket recv: {"message":"client gui"}
[May 11 12:24:05:133700] pilight-daemon: DEBUG: socket write succeeded: {"message":"accept client"}

[May 11 12:24:05:133899] pilight-daemon: INFO: client recognized as gui
[May 11 12:24:25:275375] pilight-daemon: DEBUG: called arctech_switches parseBinary()
[May 11 12:24:25:278046] pilight-daemon: DEBUG: broadcasted: {"code":{"id":62596,"unit":1,"state":"on"},"origin":"receiver","protocol":"arctech_switches","uuid":"0000-00-00-01-f5f042","repeats":1}
[May 11 12:24:25:279341] pilight-daemon: DEBUG: broadcasted: {"code":{"id":62596,"unit":1,"state":"opened"},"origin":"receiver","protocol":"arctech_contact","uuid":"0000-00-00-01-f5f042","repeats":1}
[May 11 12:24:25:280640] pilight-daemon: DEBUG: broadcasted: {"code":{"id":62596,"unit":1,"state":"up"},"origin":"receiver","protocol":"arctech_screens","uuid":"0000-00-00-01-f5f042","repeats":1}
[May 11 12:24:25:630315] pilight-daemon: DEBUG: called pollin parseBinary()
[May 11 12:24:25:632072] pilight-daemon: DEBUG: broadcasted: {"code":{"systemcode":30,"unitcode":10,"state":"on"},"origin":"receiver","protocol":"pollin","uuid":"0000-00-00-01-f5f042","repeats":1}
[May 11 12:24:25:714248] pilight-daemon: DEBUG: called pollin parseBinary()
[May 11 12:24:25:715799] pilight-daemon: DEBUG: broadcasted: {"code":{"systemcode":30,"unitcode":10,"state":"on"},"origin":"receiver","protocol":"pollin","uuid":"0000-00-00-01-f5f042","repeats":2}
[May 11 12:24:41:510259] pilight-daemon: DEBUG: called pollin parseBinary()
[May 11 12:24:41:511865] pilight-daemon: DEBUG: broadcasted: {"code":{"systemcode":30,"unitcode":10,"state":"on"},"origin":"receiver","protocol":"pollin","uuid":"0000-00-00-01-f5f042","repeats":1}
[May 11 12:24:41:967364] pilight-daemon: DEBUG: called arctech_switches parseBinary()
[May 11 12:24:41:969763] pilight-daemon: DEBUG: broadcasted: {"code":{"id":62596,"unit":1,"state":"off"},"origin":"receiver","protocol":"arctech_switches","uuid":"0000-00-00-01-f5f042","repeats":1}
[May 11 12:24:41:971034] pilight-daemon: DEBUG: broadcasted: {"code":{"id":62596,"unit":1,"state":"closed"},"origin":"receiver","protocol":"arctech_contact","uuid":"0000-00-00-01-f5f042","repeats":1}
[May 11 12:24:41:972256] pilight-daemon: DEBUG: broadcasted: {"code":{"id":62596,"unit":1,"state":"down"},"origin":"receiver","protocol":"arctech_screens","uuid":"0000-00-00-01-f5f042","repeats":1}
[May 11 12:24:42:280386] pilight-daemon: DEBUG: caught minimum # of repeats 1 of elro_ad
[May 11 12:24:42:280648] pilight-daemon: DEBUG: called elro_ad parseCode()
[May 11 12:24:42:322331] pilight-daemon: DEBUG: called pollin parseBinary()
[May 11 12:24:42:323969] pilight-daemon: DEBUG: broadcasted: {"code":{"systemcode":30,"unitcode":10,"state":"off"},"origin":"receiver","protocol":"pollin","uuid":"0000-00-00-01-f5f042","repeats":1}
[May 11 12:24:42:406241] pilight-daemon: DEBUG: called pollin parseBinary()
[May 11 12:24:42:407799] pilight-daemon: DEBUG: broadcasted: {"code":{"systemcode":30,"unitcode":10,"state":"off"},"origin":"receiver","protocol":"pollin","uuid":"0000-00-00-01-f5f042","repeats":2}
[May 11 12:24:42:575044] pilight-daemon: DEBUG: called pollin parseBinary()
[May 11 12:24:42:576509] pilight-daemon: DEBUG: broadcasted: {"code":{"systemcode":30,"unitcode":10,"state":"off"},"origin":"receiver","protocol":"pollin","uuid":"0000-00-00-01-f5f042","repeats":1}

Here is a similar thread here.

Greetings from Germany
Dominik
 
Reply
#2
no idea?
 
Reply
#3
No patience Smile
 
Reply
#4
Sorry Big Grin
ok I'm patiently
 
Reply
#5
@Dominik

i use the same set here with the following workaround:

Set on your remote the DIP switches like this off|off|on|off (AB660 Code) if possible,
now look for systemcode and unitcode with pilight receive,
setup the config.json with the received results,
get the switches in learning mode and push the buttons on the webgui accordingly to the unit.
This should work until there is a protocol for the 800 series.


lcd4linux
 
Reply
#6
Cool it works Smile
thank you, now I can switch it with the remote, with the remote wall swtich and the webgui Smile
I have no DIP switches on the remote Wink
But I don't understand the problem, the outlet is configurated with the remote and I received the code with pilight. Why I have to learn the outlet again with the same code just with pilight, but with the raw code it works from the beginning...
The main thing is it runs Wink
Thanks a lot @lcd4linux and also @curlymo

Greetings from Germany
Dominik

P.s. When I i can do something to help develop a protocol for that series tell me about it.
 
Reply
#7
How many buttons does this remote have?

@lcd4linux. Can you also post pilight-debug output for each button?
 
Reply
#8
The remote has buttons for 4 units and one ON/OFF Master.
According to the Manual as pdf online there are DIP switches, in my Manual from the packaging there are no DIP switches...

Attached a picture of the remote.


Attached Files Thumbnail(s)
   
 
Reply
#9
Hi,

i am new in pilight.

I bought this switch:
http://www.amazon.de/gp/product/B004NTL1...UTF8&psc=1

I'm not sure what product it realy is. In the descripton is the name HE886.
But on the wall switch it is HE842.

First i tried to get the protocol and the systemcode and unitcode with the command pilight-receive.
I tried all protocols the pilight-receive shown me.

So now i have no more ideas what i can do.

The Intertechno Funksteckdosen work quite fine:
http://www.amazon.de/gp/product/B0054IPA...UTF8&psc=1

This is the result of pilight-learn:
Code:
--[RESULTS]--

hardware:       433gpio
pulse:          3
rawlen:         50
binlen:         12
plslen:         265

on-off bit(s):  11
all bit(s):
unit bit(s):

Raw code:
265 1325 265 1325 265 265 265 265 265 265 265 1325 265 1325 265 1325 265 1325 265 265 265 265 265 265 265 1325 265 1325 265 1325 265 1325 265 265 265 1325 265 1325 265 265 530 265 265 1325 265 1590 0 530 0 265
Raw simplified:
On:     01100101011001010101010101100101010101100110011001
Off:    01100101011001010101010101100101010101100110011001
All:    01100101011001010101010101100101010101100110010101
Unit 1: 01100101011001010101010101100101010101100110011001
Unit 2: 00000000000000000000000000000000000000000000000000
Unit 3: 00000000000000000000000000000000000000000000000000
Binary code:
On:     010111011000
Off:    010111011001
All:    010111011001
Unit 1: 010111011000
Unit 2: 000000000000
Unit 3: 000000000000

I hope somone can help me.

Thank you
 
Reply
#10
What does pilight-receive say?
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  [Partially Supported] TFA / Conrad Weather Yves 184 9,344 03-31-2019, 05:22 PM
Last Post: curlymo
  [Fully Supported] DHT22 IcedEarth 86 30,535 11-18-2018, 09:33 AM
Last Post: curlymo
  [Fully Supported] Arctech Old Martin 111 34,219 03-27-2018, 04:43 PM
Last Post: genfersee
  [Fully Supported] Clarus Switches Marcin 69 23,514 01-30-2018, 07:10 PM
Last Post: Niek
  [Fully Supported] Remote Control Socket (RC101-U/RC201) Sean 18 10,351 01-04-2018, 06:18 AM
Last Post: ettman8
  Elro/Flamingo FA20RF Smoke detector meloen 76 37,150 12-16-2017, 07:07 PM
Last Post: pilino1234
  [Fully Supported] LM75 and LM76 temperature sensor horst_dieter 64 24,427 11-19-2017, 08:54 PM
Last Post: edepi
  [Fully Supported] No-brand temp/humidity sensor (alecto_ws1700) meloen 57 34,287 12-25-2016, 09:53 PM
Last Post: creamers
Lightbulb [Fully Supported] Kaku Door sensor (AMST-606) geerttttt 50 23,410 11-29-2016, 06:52 AM
Last Post: curlymo
  [Fully Supported] Impuls/SelectRemote Bram 113 46,221 05-28-2016, 02:53 PM
Last Post: Puuu

Forum Jump:


Browsing: 1 Guest(s)