• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


[Fully Supported] KlikAanKlikUit Motion Sensor
#31
(02-05-2020, 10:19 PM)curlymo Wrote: Even so, the kaku devices should be recognized as a switch, motion, contact and such. If it isn't recognized at all, something seems wrong with the device.

I was able to exchange the motion detector at the store for another copy of the same type (APIR-2150). But just like with the first, the id codes are not visible in the debug output.

Attached you will find a capture of pilight-raw. During capture the sensor was activated and deactivated 5 times.
I don't understand the codes and don't find any similarities within. I hope you can get something out of it that will help.


Attached Files
.txt   KAKU APIR-2150 5 times on-off.txt (Size: 185.77 KB / Downloads: 3)
 
Reply
#32
Can you try learning the device codes sent by pilight?
 
Reply
#33
(02-25-2020, 09:14 PM)curlymo Wrote: Can you try learning the device codes sent by pilight?

How do you mean? The device is a sender, it doesn't have ability to learn codes from pilight, does it?
 
Reply
#34
I don't know the device very well Smile

Can you compile yourself?
 
Reply
#35
(02-26-2020, 07:28 PM)curlymo Wrote: I don't know the device very well Smile

Can you compile yourself?

No, this is a vendor build device, with built-in I'd and code that can't be changed.
 
Reply
#36
Can you manually compile pilight is what i meant?
 
Reply
#37
@Gisto: Please see Pull Request #451. This is for supporting the 2 APIR-2150 devices I have. Based on the RAW readings you shared I expect this to support yours as well
 
Reply
#38
(03-24-2020, 04:34 PM)tvdgeer Wrote: @Gisto: Please see Pull Request #451. This is for supporting the 2 APIR-2150 devices I have. Based on the RAW readings you shared I expect this to support yours as well

I do not understand what to do exactly. If I am right I should install archtech-dusk protocol and modify a parameter.
Code:
apt-get install pilight-protocol-arctech-dusk

But when I try to do that I get this:
Package pilight-protocol-arctech-dusk is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or is only available from another source


Seems like the info there is vor pilight v6? I am running v8.
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  [Partially Supported] TFA / Conrad Weather Yves 203 26,519 03-27-2020, 01:21 PM
Last Post: Ascenion
  Digoo / Baldr / Nexus / Rubicson temperature/humidity sensor thielj 12 3,099 02-10-2020, 10:54 PM
Last Post: ha_username
  Support for Temperaturee sensor clona 4 484 02-10-2020, 02:52 PM
Last Post: clona
  gs-iwds07 window sensor Loggisch 48 17,403 12-09-2019, 07:14 PM
Last Post: curlymo
Lightbulb [Fully Supported] Kaku Door sensor (AMST-606) geerttttt 53 28,414 10-19-2019, 06:26 PM
Last Post: curlymo
  433MHz PIR sensor from Amazon ha_username 0 716 09-29-2019, 11:44 PM
Last Post: ha_username
  [Fully Supported] DHT22 IcedEarth 86 37,356 11-18-2018, 09:33 AM
Last Post: curlymo
  Pearl weatherstation sensor for FWS-686 & FWS-665 chklump 13 6,438 08-12-2018, 05:34 PM
Last Post: fourty2
  TFA 30.3160 Pool Sensor wseifert 4 1,484 05-30-2018, 09:24 AM
Last Post: wseifert
  [Fully Supported] Arctech Old Martin 111 42,588 03-27-2018, 04:43 PM
Last Post: genfersee

Forum Jump:


Browsing: 1 Guest(s)