• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


[Fully Supported] KlikAanKlikUit Motion Sensor
#21
pilight-raw and pilight-debug don't show anything.
To make sure the hardware works correct, I ordered a new 433 rf receiver. I will try on those and post results here.
 
Reply
#22
Same results.

Other senders are recognized but for some reason AWST-6000 and AWST-8800 senders are not.
Altough other users confirm that it works, I can´t get this to work.

Ideas and tips are welcome.
 
Reply
#23
I replaced the jumper wires and it surprisingly works now.
 
Reply
#24
I bought a KaKu Motion detector APIR-2150 assuming that it would work with pilight, but it doesn't.
I don't see anything in pilight-debug.
When I run pilight-raw I get so manny codes and none are equal. I don't fully understand how to use pilight-raw in such a way that I can find the raw codes for a device. Can somebody explain?
 
Reply
#25
Did other kaku work for you?
 
Reply
#26
(02-02-2020, 05:25 PM)curlymo Wrote: Did other kaku work for you?

Yes, I have several kaku units, they all work with pilight (remote control, doorbell sender and receiver, wallsockets, led lights).
 
Reply
#27
And if you configure the motion sensor in pilight as a switch instead of motion?
 
Reply
#28
(02-05-2020, 07:25 PM)curlymo Wrote: And if you configure the motion sensor in pilight as a switch instead of motion?

I can't configure it because I don't know the id and the unit. That's what I am trying to find out.
 
Reply
#29
Even so, the kaku devices should be recognized as a switch, motion, contact and such. If it isn't recognized at all, something seems wrong with the device.
 
Reply
#30
(02-05-2020, 10:19 PM)curlymo Wrote: Even so, the kaku devices should be recognized as a switch, motion, contact and such. If it isn't recognized at all, something seems wrong with the device.

Well, the strange thing is that it works when directly paired to my doorbell or led lamp. So the devices does send a signal for sure. But I'll try to change it for another one at the store.
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  [Partially Supported] TFA / Conrad Weather Yves 203 29,723 03-27-2020, 01:21 PM
Last Post: Ascenion
  Digoo / Baldr / Nexus / Rubicson temperature/humidity sensor thielj 12 3,449 02-10-2020, 10:54 PM
Last Post: ha_username
  Support for Temperaturee sensor clona 4 599 02-10-2020, 02:52 PM
Last Post: clona
  gs-iwds07 window sensor Loggisch 48 18,238 12-09-2019, 07:14 PM
Last Post: curlymo
Lightbulb [Fully Supported] Kaku Door sensor (AMST-606) geerttttt 53 29,294 10-19-2019, 06:26 PM
Last Post: curlymo
  433MHz PIR sensor from Amazon ha_username 0 798 09-29-2019, 11:44 PM
Last Post: ha_username
  [Fully Supported] DHT22 IcedEarth 86 38,551 11-18-2018, 09:33 AM
Last Post: curlymo
  Pearl weatherstation sensor for FWS-686 & FWS-665 chklump 13 6,699 08-12-2018, 05:34 PM
Last Post: fourty2
  TFA 30.3160 Pool Sensor wseifert 4 1,586 05-30-2018, 09:24 AM
Last Post: wseifert
  [Fully Supported] Arctech Old Martin 111 43,810 03-27-2018, 04:43 PM
Last Post: genfersee

Forum Jump:


Browsing: 1 Guest(s)