• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Intertechno ITT 1500
#1
Hello together,
I had a Problem with Intertechno ITT 1500 switches. Only one of the three switches can be triggered with the "send" command pilight-send -p intertechno_switch -i 12416160 -u 1 -t. The two other switches(unit 0 und 2) not respond.
Can someone help me. Thank you.

Here some receives:
{
"origin": "sender",
"protocol": "arctech_switch",
"message": {
"id": 12416160,
"unit": 0,
"state": "off"
},
"repeat": 1,
"uuid": "0000-00-00-15-6a08dd"
}
{
"origin": "sender",
"protocol": "arctech_switch",
"message": {
"id": 12416160,
"unit": 1,
"state": "on"
},
"repeat": 1,
"uuid": "0000-00-00-15-6a08dd"
}
{
"message": {
"id": 12416160,
"unit": 0,
"state": "up"
},
"origin": "receiver",
"protocol": "arctech_screen",
"uuid": "0000-00-00-15-6a08dd",
"repeats": 1
}
{
"message": {
"id": 12416160,
"unit": 0,
"state": "opened"
},
"origin": "receiver",
"protocol": "arctech_contact",
"uuid": "0000-00-00-15-6a08dd",
"repeats": 1
}
{
"message": {
"id": 12416160,
"unit": 0,
"state": "on"
},
"origin": "receiver",
"protocol": "arctech_switch",
"uuid": "0000-00-00-15-6a08dd",
"repeats": 2
}
{
"message": {
"id": 12416160,
"unit": 0,
"state": "opened"
},
"origin": "receiver",
"protocol": "arctech_contact",
"uuid": "0000-00-00-15-6a08dd",
"repeats": 2
}
 
Reply
#2
Please read and follow the rules you got in the PM...
 
Reply
#3
Hi,.
Maybe I can help. I use several Intertechno wireless boxes with pilight. Please find enclosed the following example:
On: sudo pilight-send -p intertechno_old -i 0 -u 2 -t
Off: sudo pilight-send -p intertechno_old -i 0 -u 2 -f

The code on the remote control is C1 (parameter A= u 1, C = u 2; usw)
Sign up if you have any questions.

Kind Regards
 
Reply
#4
I am using several IT-1500, this is my config file.
Code:
"Camera": {
                        "name": "PT Kamera",
                        "uuid": "0000-b8-27-eb-4646b0",
                        "protocol": [ "intertechno_switch" ],
                        "id": [{
                                "id": 1137212,
                                "unit": 2
                        }],
                        "state": "on"
                }
The ITT-1500 switch expects a learning telegram (for id and unit) after plugged in, during that learning time period, the LED is flashing, if the telegram is accepted the LED stops flashing immediately and the configuration parameters are stored, if it does not receive a telegram during that time period, it uses its old configuration parameters.
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Intertechno ITR-1500 (Model PER-1500) Sascha 20 13,343 01-04-2020, 10:58 PM
Last Post: curlymo
  Intertechno ITLR-300 dimmer witty 14 8,148 03-16-2016, 03:23 PM
Last Post: eribus
  [workaround]Intertechno ITL 210 Dimmer IcedEarth 5 5,686 03-14-2016, 12:26 AM
Last Post: witty
  Intertechno PAR-1500 IcedEarth 4 4,519 02-22-2016, 06:12 PM
Last Post: heikoh81
  [Fully Supported] Intertechno Shutter Switch effjey 4 3,856 02-09-2014, 01:37 PM
Last Post: effjey
  intertechno auto-learning lumihei 17 9,850 12-11-2013, 07:56 AM
Last Post: curlymo
  Intertechno Old uwe 5 4,655 10-26-2013, 08:00 PM
Last Post: curlymo
  Intertechno Dimmers muggi 28 16,063 09-17-2013, 10:43 AM
Last Post: muggi

Forum Jump:


Browsing: 1 Guest(s)