[terrar]

@curlymo

I am thinking about testing the new Odroid-C1 Board for using with pilight.

Details

In their forum they tell that wiringPI has already been ported and adapted to this board.
Do you think that it would be easy to port pilight to this board then?

If you mean that it is possible i will order one.
The price is hot! (Same as Raspberry but much more power)

[curlymo]

Please ask them first if they can add support for themselves inside wiringX. As i said, i really want manufacturers to support their own devices

[curlymo]

@terrar, can you post the output of:

Code:

cat /proc/cpuinfo

[Kucuk]

Code:

odroid@odroid:~$ cat /proc/cpuinfo
Processor       : ARMv7 Processor rev 1 (v7l)
processor       : 0
BogoMIPS        : 3.27

processor       : 1
BogoMIPS        : 3.27

processor       : 2
BogoMIPS        : 3.27

processor       : 3
BogoMIPS        : 3.27

Features        : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x0
CPU part        : 0xc05
CPU revision    : 1

Hardware        : ODROIDC
Revision        : 000a
Serial          : 1b00000000000000
odroid@odroid:~$

[curlymo]

Can you guys test the wiringX odroid branch examples?
https://github.com/wiringX/wiringX/tree/odroid

[Kucuk]

Looks nice!
Commands seem to work, I can turn everything on and off by using pilight-send. Receiving signals work well too.

However the webgui doesn't work. The logs say the following:

Code:

[Mar 09 08:26:44:836835] pilight-daemon: INFO: version 6.0, commit v6.0-19-gafe5473
[Mar 09 08:26:44:928902] pilight-daemon: NOTICE: a pilight daemon was found @192.168.2.105, clientizing
[Mar 09 08:26:44:933157] pilight-daemon: ERROR: hardware not supported
[Mar 09 08:26:44:933267] pilight-daemon: ERROR: could not initialize 433gpio hardware module

Edit: Also, pilight-debug returns the following:

Code:

[ Mar 09 09:46:03:50851] pilight-debug: ERROR: hardware not supported
[ Mar 09 09:46:03:51160] pilight-debug: ERROR: could not initialize 433gpio hardware mode

[curlymo]

I asked if you could test the odroid branch of wiringX, not if you could test pilight. That doesn't have odroid support (yet).

[Kucuk]

Since pilight is using wirinX, I thought it would be smart to directly test pilight

[terrar]

Tested wiringX:

blink - works

Code:

root@doku:/home/odroid/wiringx/examples# ./blink
running on a odroid
97
97

read - works

Code:

root@doku:/home/odroid/wiringx/examples# ./read
running on a odroid
88
87
Writing to pin 0: High
88
Reading from pin 1: 1
Writing to pin 0: Low
88
Reading from pin 1: 0
Writing to pin 0: High
88
Reading from pin 1: 1
Writing to pin 0: Low
88

interrupt - does not work (work in progress by odroid)

Code:

root@doku:/home/odroid/wiringx/examples# ./interrupt
running on a odroid
88
odroid->isr: Failed to set interrupt edge to both
odroid: error while calling isr
88
garbage collected wiringX library

Because of some error in their kernel interrupt is not running at the moment.
I am searching for further informations.

[curlymo]

@terrar, meet me on IRC ok?