[danieljo]

Thank for your reply.

But if piSchedule executes an ON/OFF you should see that with pilight.

This has no function. PiScheduler execute the rule, but no change in pilight.

Okey i will show to set the right geolocation in my system.

[gneandr]

@danieljo
How do you execute the ON/OFF command with piSchedule .. the GUI or a console command?

[danieljo]

@danieljo
How do you execute the ON/OFF command with piSchedule .. the GUI or a console command?

Over GUI

[gneandr]

@danieljo
One note: the docu describes a support program "piConsole.py". That has been removed with vers.0.4 .. so the docu isn't correct, sorry.

Using the GUI you need to use this:


You can execute an ON/OFF command using the browser with eg.:
yourIP:yourPort/config?device;on
yourIP:yourPort/config?device;off

[danieljo]

You can execute an ON/OFF command using the browser with eg.:
yourIP:yourPort/config?device;on
yourIP:yourPort/config?device;off

Mean you the IP and PORT from pilight or from piScheduler. Then i test it again tomorrow.

[gneandr]

The IP and port can be seen in the GUI url box with running piSchedule.
See also docu:
https://dl.dropboxusercontent.com/u/3544...rview.html
at "piSchedule auf Smartphone oder PC"
or
https://dl.dropboxusercontent.com/u/3544...rview.html
at "piSchedule on PC or Smartphone Using a browser"

[danieljo]

So i tested piScheduler with pilight on a fresh new installed RaspberryPi2.

When i configure a Job over the GUI:

Tagesplan & Jobs -> "Job" zum Tagesplan hinzufügen. It work the device "10000E" will switch on / off. But the Job will not saved in my config.ini "Wohnung.ini"

Then i add a Job over the GUI:

Tagesplan & Jobs -> Tagesplan editieren -> Wohnung.ini

The Job will saved in my "Wohnung.ini" But the Job will not execute.

The test to switch manually a device over the browser:

Code:

http://192.168.1.164:5003/config?10000E;off

Give me a error:

Code:

Error 404 Not found
Sorry, the requested URL 'http://192.168.1.164:5003/config?10000E;off' caused an error:
Not found: '/config'

PS: Speak you German? I think this is easyer to describe the Problem. Alternative over PrivateMessage. I can you give my external IP Adress so you can direct show my Problems.

[gneandr]

@danieljo
gneandr at web dot de
Yes, you can speak German .. meine Muttersprache

[curlymo]

As long as you speak English here on the forum.

[gneandr]

NOP .. waiting for a PM to the named address ...