• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


mumbi-AB440R
#1
Hello,
I still try understand the protocol of the mumbi AB440R switch, but I have some questions.
I recorded a switch A on and off (two actions) with pilight-receive
Code:
{
    "message": {
        "id": 2647042,
        "unit": 0,
        "state": "on"
    },
    "origin": "receiver",
    "protocol": "arctech_switch",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 1
}
{
    "message": {
        "id": 2647042,
        "unit": 0,
        "state": "opened"
    },
    "origin": "receiver",
    "protocol": "arctech_contact",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 1
}
{
    "message": {
        "id": 2647042,
        "unit": 0,
        "state": "up"
    },
    "origin": "receiver",
    "protocol": "arctech_screen",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 1
}
{
    "message": {
        "systemcode": 20,
        "unitcode": 11,
        "state": "on"
    },
    "origin": "receiver",
    "protocol": "elro_800_switch",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 1
}
{
    "message": {
        "id": 2,
        "state": "off"
    },
    "origin": "receiver",
    "protocol": "ehome",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 1
}
{
    "message": {
        "systemcode": 20,
        "unitcode": 11,
        "state": "opened"
    },
    "origin": "receiver",
    "protocol": "elro_800_contact",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 1
}
{
    "message": {
        "systemcode": 20,
        "unitcode": 11,
        "state": "on"
    },
    "origin": "receiver",
    "protocol": "elro_800_switch",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 2
}
{
    "message": {
        "id": 2,
        "state": "off"
    },
    "origin": "receiver",
    "protocol": "ehome",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 2
}
{
    "message": {
        "systemcode": 20,
        "unitcode": 11,
        "state": "opened"
    },
    "origin": "receiver",
    "protocol": "elro_800_contact",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 2
}
{
    "message": {
        "systemcode": 20,
        "unitcode": 11,
        "state": "on"
    },
    "origin": "receiver",
    "protocol": "elro_800_switch",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 3
}
{
    "message": {
        "id": 2,
        "state": "off"
    },
    "origin": "receiver",
    "protocol": "ehome",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 3
}
{
    "message": {
        "systemcode": 20,
        "unitcode": 11,
        "state": "opened"
    },
    "origin": "receiver",
    "protocol": "elro_800_contact",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 3
}
{
    "message": {
        "id": 2647042,
        "unit": 0,
        "state": "off"
    },
    "origin": "receiver",
    "protocol": "arctech_switch",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 1
}
{
    "message": {
        "id": 2647042,
        "unit": 0,
        "state": "closed"
    },
    "origin": "receiver",
    "protocol": "arctech_contact",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 1
}
{
    "message": {
        "id": 2647042,
        "unit": 0,
        "state": "down"
    },
    "origin": "receiver",
    "protocol": "arctech_screen",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 1
}
{
    "message": {
        "id": 2647042,
        "unit": 0,
        "state": "off"
    },
    "origin": "receiver",
    "protocol": "arctech_switch",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 2
}
{
    "message": {
        "systemcode": 20,
        "unitcode": 11,
        "state": "off"
    },
    "origin": "receiver",
    "protocol": "elro_800_switch",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 1
}
{
    "message": {
        "id": 2,
        "state": "off"
    },
    "origin": "receiver",
    "protocol": "ehome",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 1
}
{
    "message": {
        "systemcode": 20,
        "unitcode": 11,
        "state": "closed"
    },
    "origin": "receiver",
    "protocol": "elro_800_contact",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 1
}
and with pilight-debug
Code:
Press and hold one of the buttons on your remote or wait until
another device such as a weather station has send new codes
The debugger will automatically reset itself after one second of
failed leads. It will keep running until you explicitly stop it.
This is done by pressing both the [CTRL] and C buttons on your keyboard.
--[RESULTS]--

time:        Thu Feb 26 17:16:40 2015
hardware:    433gpio
pulse:        4
rawlen:        132
binlen:        33
pulselen:    301

Raw code:
301 2408 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 1204 301 301 301 301 301 1204 301 1204 301 301 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 1204 301 301 0 1204 301 301 301 301 301 1204 301 301 301 1204 301 1204 301 301 301 301 301 1505 0 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 1204 301 301 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 10234
Binary code:
000010100001100100000000100000001
--[RESULTS]--

time:        Thu Feb 26 17:16:40 2015
hardware:    433gpio
pulse:        4
rawlen:        116
binlen:        29
pulselen:    313

Raw code:
313 1252 313 1252 313 313 313 313 313 313 313 1252 313 1252 313 1252 313 1252 313 313 313 313 313 313 313 1252 313 1252 313 1252 313 1252 313 313 313 313 313 1252 313 313 313 1252 313 1252 313 1252 313 313 313 1252 313 1252 313 1252 313 313 313 313 313 1252 313 313 313 1252 313 313 313 1252 313 313 313 1252 313 1252 313 1252 313 313 313 313 313 313 313 1252 313 1252 313 1252 313 313 313 1252 313 1252 313 313 313 1252 313 313 313 1252 313 313 313 313 313 313 313 1252 313 1252 313 1252 313 10642
Binary code:
10110011001010111110111000011
--[RESULTS]--

time:        Thu Feb 26 17:16:41 2015
hardware:    433gpio
pulse:        3
rawlen:        103
binlen:        26
pulselen:    236

Raw code:
236 944 944 472 236 944 944 472 236 944 236 944 236 944 944 472 236 944 236 944 236 944 236 944 472 944 236 944 236 944 944 472 236 944 236 944 236 944 944 472 236 944 944 236 236 944 236 472 0 472 236 708 472 472 236 708 236 472 236 236 236 236 472 236 236 236 708 472 236 236 236 236 1416 236 236 472 472 0 236 236 472 236 236 0 236 236 1180 236 236 236 0 236 1416 944 236 708 236 1652 236 236 3068 708 8024
Binary code:
00101110100111001000000100
.
I prevented noise by a alu foil shield.
Receive and debug interprets the protocol and seems to divide the sequence into more than one sequence. How may I get a complete trace of one action?

And if i send one debuged code
Code:
sudo pilight-send  -p raw --code="301 2408 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 1204 301 301 301 301 301 1204 301 1204 301 301 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 1204 301 301 0 1204 301 301 301 301 301 1204 301 301 301 1204 301 1204 301 301 301 301 301 1505 0 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 1204 301 301 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 301 301 1204 301 10234"
I get more than one entry with receive and no action at the switch.
Code:
{
    "message": {
        "id": 2647042,
        "unit": 0,
        "state": "off"
    },
    "origin": "receiver",
    "protocol": "arctech_switch",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 1
}
{
    "message": {
        "id": 2647042,
        "unit": 0,
        "state": "closed"
    },
    "origin": "receiver",
    "protocol": "arctech_contact",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 1
}
{
    "message": {
        "id": 2647042,
        "unit": 0,
        "state": "down"
    },
    "origin": "receiver",
    "protocol": "arctech_screen",
    "uuid": "0000-00-00-5c-82f604",
    "repeats": 1
}
How may i proceed to get the full code of one action to use it successfully with send raw?
Tanks in advance for help.
Raspberry B+  
Low-pass filter, Receiver RXB6, Sender I-XI
Version 7.0.178 (nightly version), Android App 6.0.4
 
Reply
#2
(02-26-2015, 07:22 PM)curlymo Wrote: ... using words in the title ... aren't using code tags.
Which words are not allowed?
In your post
- Use post formatting (such as [ code ] ... [ /code ] tags)
points to a page with the message
Unfortunately, the page you tried to access could not be found.

I don't know which kind of tags are required.

I would like to obey to forum rules, but i did not understand what to do.
Raspberry B+  
Low-pass filter, Receiver RXB6, Sender I-XI
Version 7.0.178 (nightly version), Android App 6.0.4
 
Reply
#3
Thanks.
I edited the first post.

The switch-sender is lettered mumbi AB440R the wireless switch unit is lettered mumbi m-FS300.

pilight-receive does not recognise the sender protocol and if I use the protocolled systemcode and unitcode it does not work.

How may I get the correct ids, to use pilight?
Raspberry B+  
Low-pass filter, Receiver RXB6, Sender I-XI
Version 7.0.178 (nightly version), Android App 6.0.4
 
Reply
#4
So yours is the same as described here:
http://forum.pilight.org/Thread-Fully-Su...ight=mumbi
 
Reply
#5
(02-26-2015, 09:02 PM)curlymo Wrote: So yours is the same as described here ...
I don't believe that. My sending device has no switches to configure.
The wireless switching unit may be the same.

The device are paired by pushing one of the 4 channel buttons 10 sec after plug in the wireless unit.

If somebody is interested I may scan and post the user manual
Raspberry B+  
Low-pass filter, Receiver RXB6, Sender I-XI
Version 7.0.178 (nightly version), Android App 6.0.4
 
Reply
#6
Is is possible that mumbi is similar elro?
While searching informations about AB440R i found THIS

Do they look like your devices?

Also AB440R seems to be the remote controller.
A switch is something other for me.
Terrarium:  RPi Model B Rev 2 / pilight 8.1.2 / stretch
Aquarium: RPi Model B Plus Rev 1.2 / pilight 8.0.6 / jessie
 
Reply
#7
Yes, our Elro switches say Mumbi on the back, they are related somehow.
 
Reply
#8
(02-26-2015, 11:53 PM)terrar Wrote: ... Also AB440R seems to be the remote controller...
Its is correct AB440R is the remote transmitter for the set. But there are no dip switches on this one. See the picture in the user manual.
AB440R is written on the backside of the transmitter.
The set is called ms-FS300 and that is written on the switches.
But no dip switches on the transmitter and on the switch.


Attached Files
.pdf   mumbi.pdf (Size: 1.31 MB / Downloads: 13)
Raspberry B+  
Low-pass filter, Receiver RXB6, Sender I-XI
Version 7.0.178 (nightly version), Android App 6.0.4
 
Reply
#9
I now edited the first post as requested and added the attachments as code into the text.

Receive recognises different known protocols and debug shows entries that are much longer than they should with the mumbi protocol.
Raspberry B+  
Low-pass filter, Receiver RXB6, Sender I-XI
Version 7.0.178 (nightly version), Android App 6.0.4
 
Reply
#10
Our Elro/Mumbi switches say Mumbi m-FS300 on the switch and Elro AB440R on the remote, we bought these as a set a while back. Both the switch and the remote have dip switches in them.

Additionally, a Google search gave some pieces of interesting information.
1) Mumbi is not a company, but a trademark of handynow.de , and all sites I found make it sound like they are using the same protocol as Elro
2) Elro and Flamingo are both produced by the same company, Smartwares Safety & Lighting
(a bit offtopic: the Elro/Mumbi switches from the 440 series can be reprogrammed to use the intertechno protocol so they can be switched with an intertechno remote http://www.fhemwiki.de/wiki/Intertechno_...Elro_AB440 (in German))
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  mumbi rcs-20gs protocol scootermacro 0 565 06-21-2019, 12:10 PM
Last Post: scootermacro
  Switch Mumbi m-FS300 display as arctech-switch Rschnauzer 7 2,153 03-24-2018, 07:13 PM
Last Post: Rschnauzer
  mumbi m-FS300 with AB440R Remote / no dips altavista 9 7,835 11-12-2016, 11:04 PM
Last Post: wo_rasp
  [Fully Supported] mumbi m-FS300 IcedEarth 142 66,892 03-15-2015, 01:49 PM
Last Post: pilino1234

Forum Jump:


Browsing: 1 Guest(s)