• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
pilight 6.0
#31
Can you post your config? (just the datetime part would be good enough Smile)
 
Reply
#32
Code:
deb http://mirrordirector.raspbian.org/raspbian/ wheezy main contrib non-free r$
deb http://apt.pilight.org/ development main
deb http://apt.pilight.org/ nightly main

I did run apt-get update, then apt-get-upgrade but the result doesn't change.

Code:
root@raspberrypi:/home/pi# apt-get install pilight
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package pilight is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
  pilight-webgui

E: Package 'pilight' has no installation candidate

For some reason the install source can't be found, or only a bit of it.
 
Reply
#33
Change development into stable and try again Smile
 
Reply
#34
(02-27-2015, 04:04 PM)pilino1234 Wrote: Change development into stable and try again Smile

Ok that worked for a part, the stable is running with an empty desktop.
Unfortunately the protocols dir stays empty and I can't run the nightly this way.
 
Reply
#35
Why do you want to have a filled protocols folders?
Code:
pilight-send -H
 
Reply
#36
For me, there is also no protocol dir in /usr/local/lib/pilight, but the wiki reads like it is a folder for developing your own protocols, so it should be empty/nonexistent Smile
 
Reply
#37
I know why we want one, but why does a regular user want one? Smile
 
Reply
#38
(02-27-2015, 04:27 PM)curlymo Wrote: Why do you want to have a filled protocols folders?
Code:
pilight-send -H

Because I suppose that this dir is there for a reason and I have a problem using the known protocols (like they can't be found).
The send-H command did list the supported codes, at least I that gives me the correct names.
 
Reply
#39
The reason your "desktop" (webGUI Wink) is empty is because there are no devices defined in your config device- and gui-section.
I would guess you aren't running a nightly because there is none at the moment? At least I couldn't see anything like one looking around on the repo... (@curlymo, can you confirm?) Because I also have the nightly enabled and I'm running V6.0 stable too.
 
Reply
#40
No nightlies.
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  pilight-control TML 13 320 05-27-2020, 07:51 AM
Last Post: curlymo
  API Requests by HTTP from other devices fore use in pilight scootermacro 2 155 05-10-2020, 08:19 AM
Last Post: scootermacro
  pilight-send seems successful but doesn't actually send RF signal ayeyebrazov 37 2,009 03-31-2020, 01:02 PM
Last Post: curlymo
  pilight 8.1.5 not working on Raspberry pi after reboot beejayf 4 505 03-08-2020, 12:14 AM
Last Post: beejayf
  pilight cpu usage possibly associated with noticeable sluggishness? hepcat72 4 521 01-28-2020, 08:02 PM
Last Post: hepcat72
  apt.pilight.org stable Release' is not signed. thomasol 2 645 01-23-2020, 11:34 PM
Last Post: thomasol
  pilight and SIGNALduino cc1101 Caleus 0 438 01-19-2020, 09:13 AM
Last Post: Caleus
  filter stopped working after update to pilight 8.1.5 zlin50 19 1,346 01-03-2020, 02:15 PM
Last Post: curlymo
Question [Solved] Openweathermap with pilight 7.0-40 doesn't work Seebueb 2 530 01-01-2020, 06:45 PM
Last Post: Seebueb
  [Solved] Strange receive problem with 433Mhz Receiver and pilight 8.1.5 vanillaice30 15 1,413 12-18-2019, 11:09 AM
Last Post: vanillaice30

Forum Jump:


Browsing: 1 Guest(s)