• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
pilight Nano USB interface
Can you post the debug output for impuls and kaku_switch_old.
 
Reply
Can you also post the debug from impuls from a Raspberry Pi with regular GPIO receiving?
 
Reply
Sure, unfiltered:

Code:
time:           Thu Apr 30 20:51:50 2015
hardware:       433gpio
pulse:          12
rawlen:         383
binlen:         96
pulselen:       329

Raw code:
0 0 329 0 0 329 0 0 0 0 0 0 329 0 0 0 0 329 0 0 0 0 987 0 0 329 329 0 329 0 0 1645 329 658 329 0 329 0 329 0 329 0 0 0 329 0 0 0 329 0 329 0 0 329 658 0 329 329 329 987 0 0 0 0 0 0 0 0 329 0 329 0 0 329 0 0 0 0 0 0 658 0 658 658 0 1316 329 0 329 0 0 329 0 329 0 329 329 0 0 0 0 0 329 0 0 0 0 0 0 987 0 0 329 0 329 0 329 329 0 329 987 329 329 1645 0 0 329 0 329 329 0 0 329 0 329 0 329 658 0 329 329 0 0 0 0 0 0 0 329 329 0 0 329 0 0 0 0 329 0 0 329 0 329 329 0 329 329 329 329 0 0 0 0 0 0 329 0 329 329 0 329 987 0 0 0 0 329 0 329 987 0 0 329 329 0 0 0 0 0 0 329 329 0 0 329 0 0 329 0 0 0 329 0 0 0 0 0 0 329 0 0 0 0 0 329 329 0 658 0 329 0 0 0 329 329 0 0 0 0 0 0 329 0 0 329 0 0 329 329 0 0 1645 0 0 329 0 329 329 329 0 0 0 0 0 0 0 0 329 329 0 0 329 0 0 329 0 0 329 0 0 329 0 0 0 0 0 0 0 329 0 329 0 329 329 0 0 0 658 0 329 0 0 0 329 0 329 0 0 987 987 0 0 0 0 0 329 0 329 0 329 0 329 329 329 0 329 987 0 0 329 0 329 0 0 0 329 0 329 0 329 0 0 329 0 0 0 0 0 0 0 329 0 329 0 329 0 0 0 329 0 329 329 0 0 0 329 0 0 0 329 0 0 0 329 0 0 329 0 329 0 0 3948 11186
Binary code:
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
 
Reply
I didn't meant unfiltered, but i meant with the ATTiny85 filter on GPIO. Impuls has a rawlen of 50 so we target that.
 
Reply
Don't have an ATTiny85 filter which I can connect to GPO...
 
Reply
Can you then at least post output that contains the rawlen of 50?
 
Reply
I'm not running any Raspberry Pis right now. pilight and the nano are running/connected to my Openpeak Joggler. As I'm not using 433GPIO hardware module I don't see this as an issue.

I'm running the nightly packages right now (pilight_6.0.142-g56de39b_i386.deb) and the printing to the terminal is still happening. I've discovered it only happens in the terminal session which starts the service so to be honest I'm not that bothered if you are unable to reproduce this yourself.

The tuning params for the nano sound like a good idea - perhaps those values could be automatically set from the theoretical limits of just the configured devices?
 
Reply
As i asked before. Is there a possibility to get access to your computer over ssh to see this myself?

As in tuning. That's exactly what is currently implemented.
 
Reply
This should be better:

Code:
--[RESULTS]--

time:           Sat May  2 11:18:44 2015
hardware:       433gpio
pulse:          4
rawlen:         50
pulselen:       138

Raw code:
414 138 414 138 414 138 414 138 414 138 414 138 414 138 414 138 552 138 414 138 138 552 138 552 138 552 414 138 138 552 414 138 138 552 414 138 138 552 414 138 138 552 414 138 138 552 138 552 138 4692
 
Reply
And if you are using the very latest windows setup with the latest including firmware you're unable to receive this output?
(v6.0.150 and firmware be2d155c5754fe5e7d353db488becedc)
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  pilight-raw changes output format from 7 to 8 Rschnauzer 2 1,156 05-04-2022, 01:32 PM
Last Post: youradultworld
  pilight on raspbian bullseye ChristianK 2 786 04-04-2022, 06:36 PM
Last Post: n.kooij
Question pilight stopped working sl4m01 5 1,868 09-16-2021, 01:34 PM
Last Post: orlo11
  how to compile pilight with custom protocol code? am i missing something? stanwebber 2 602 07-05-2021, 03:49 AM
Last Post: stanwebber
  hardware info lost after pilight restart Rschnauzer 3 831 03-17-2021, 11:44 AM
Last Post: Rschnauzer
Question pilight nightly webgui offline after some hours fleisch 4 1,247 10-26-2020, 05:19 PM
Last Post: fleisch
  pilight bugs Ascenion 1 996 03-23-2020, 06:29 PM
Last Post: curlymo
  [Solved] pilight service crashing on first webserver access after reboot VrahoK 20 6,245 12-21-2019, 09:46 AM
Last Post: curlymo
  pilight-control modify values coolinx 16 5,065 11-13-2019, 08:02 PM
Last Post: curlymo
  Bug: double free or corruption in pilight-send blackzombie 12 4,335 10-07-2019, 08:15 PM
Last Post: blackzombie

Forum Jump:


Browsing: 1 Guest(s)