• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ububtu 14.4 64 bit support
#1
I try to get pilight running on my notebook connecting the ArduinoNanoUSB.
Sadly there seems to be no installation-source for libunwind-dev and lipcap-dev
Code:
E: Paket libunwind-dev kann nicht gefunden werden.
E: Paket lipcap-dev kann nicht gefunden werden.

Any idea where i can get them for manually compiling the nightly?
Terrarium:  RPi Model B Rev 2 / pilight 8.1.2 / stretch
Aquarium: RPi Model B Plus Rev 1.2 / pilight 8.0.6 / jessie
 
Reply
#2
Of just install the precompiled pilight nightly for amd64.
 
Reply
#3
I get following error when starting pilight un my ubuntu notebook:
Code:
* Starting  pilight                                                            -- STACKTRACE (12 FRAMES) --
__restore_rt                   ip = 0x7f19e6292340, sp = 0x7ffd9613df40
event_lookup_variable          ip =   0x451713, sp = 0x7ffd9613e4f0
event_lookup_variable          ip =   0x4527cf, sp = 0x7ffd9613e560
event_parse_rule               ip =   0x453824, sp = 0x7ffd9613e6b0
registry_init                  ip =   0x4430ce, sp = 0x7ffd9613e750
config_parse                   ip =   0x4386c8, sp = 0x7ffd9613e7b0
config_read                    ip =   0x438aff, sp = 0x7ffd9613e7f0
start_pilight                  ip =   0x41a5ef, sp = 0x7ffd9613e8b0
main                           ip =   0x41b00b, sp = 0x7ffd9613ed70
__libc_start_main              ip = 0x7f19e587dec5, sp = 0x7ffd9613eda0
_start                         ip =   0x4144c9, sp = 0x7ffd9613ee60
segmentation fault
                                                                         [fail]

pilight does not start.
Terrarium:  RPi Model B Rev 2 / pilight 8.1.2 / stretch
Aquarium: RPi Model B Plus Rev 1.2 / pilight 8.0.6 / jessie
 
Reply
#4
Please post debug output in the nightly thread as described on the frontpage.
 
Reply
#5
Can you manually compile and then try again. The deb versions are not debuggable.
 
Reply
#6
I woud, but then we are back to the problem in the first post of this thread Smile
Terrarium:  RPi Model B Rev 2 / pilight 8.1.2 / stretch
Aquarium: RPi Model B Plus Rev 1.2 / pilight 8.0.6 / jessie
 
Reply
#7
What version of ubuntu is this?
 
Reply
#8
Ubuntu 14.04.2 LTS
Terrarium:  RPi Model B Rev 2 / pilight 8.1.2 / stretch
Aquarium: RPi Model B Plus Rev 1.2 / pilight 8.0.6 / jessie
 
Reply
#9
They're called:
http://packages.ubuntu.com/trusty/libunwind8-dev
and
http://packages.ubuntu.com/trusty/libpcap-dev

Both are available.
 
Reply
#10
Indeed - sorry...

Here the result of debugging the manually compiled nightly:
Code:
root@NOTEBOOK:/# gdb pilight-daemon
GNU gdb (Ubuntu 7.7.1-0ubuntu5~14.04.2) 7.7.1
Copyright (C) 2014 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from pilight-daemon...done.
(gdb) run -D
Starting program: /usr/local/sbin/pilight-daemon -D
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
[May 08 09:30:31:816855] pilight-daemon: INFO: rule #1 01-set_state_sunrise was parsed in 0.000184 seconds
[May 08 09:30:31:817052] pilight-daemon: INFO: rule #2 02-set_state_day was parsed in 0.000168 seconds
[May 08 09:30:31:817223] pilight-daemon: INFO: rule #3 03-set_state_sunset was parsed in 0.000159 seconds
[May 08 09:30:31:817435] pilight-daemon: INFO: rule #4 04-set_state_night was parsed in 0.000186 seconds
[May 08 09:30:31:817570] pilight-daemon: INFO: rule #5 05-set_state_manually was parsed in 0.000117 seconds
[May 08 09:30:31:817626] pilight-daemon: INFO: rule #6 06_neon_off_at_sunrise was parsed in 0.000039 seconds
[May 08 09:30:31:817687] pilight-daemon: INFO: rule #7 07_neon_on_at_day was parsed in 0.000038 seconds
[May 08 09:30:31:817749] pilight-daemon: INFO: rule #8 08_neon_off_at_sunset was parsed in 0.000038 seconds
[May 08 09:30:31:817809] pilight-daemon: INFO: rule #9 09_neon_off_at_night was parsed in 0.000036 seconds

Program received signal SIGSEGV, Segmentation fault.
strlen () at ../sysdeps/x86_64/strlen.S:106
106    ../sysdeps/x86_64/strlen.S: Datei oder Verzeichnis nicht gefunden.
(gdb) backtrace
#0  strlen () at ../sysdeps/x86_64/strlen.S:106
#1  0x0000000000440381 in event_parse_action_arguments (arguments=0x78fd40 "spotli.dimlevel-maximum", obj=0x78ef30, validate=1) at /home/terrar/pilight/libs/pilight/events/events.c:940
#2  0x000000000044140c in event_parse_action (action=0x78efa0 "dim DEVICE spotli TO spotli.dimlevel-maximum FROM spotli.dimlevel-minimum IN vtimesunrise.dimlevel MINUTE", obj=0x78ef30, validate=1)
    at /home/terrar/pilight/libs/pilight/events/events.c:1197
#3  0x0000000000442545 in event_parse_rule (
    rule=0x76ebc0 "IF stat_sunrise.state IS on AND stat_man.state IS off THEN dim DEVICE spotli TO spotli.dimlevel-maximum FROM spotli.dimlevel-minimum IN vtimesunrise.dimlevel MINUTE",
    obj=0x78ef30, depth=0, validate=1) at /home/terrar/pilight/libs/pilight/events/events.c:1573
#4  0x000000000043661d in rules_parse (root=0x76d2e0) at /home/terrar/pilight/libs/pilight/config/rules.c:94
#5  0x0000000000421a15 in config_parse (root=0x761a30) at /home/terrar/pilight/libs/pilight/core/config.c:119
#6  0x0000000000421e6d in config_read () at /home/terrar/pilight/libs/pilight/core/config.c:227
#7  0x0000000000419c4c in start_pilight (argc=2, argv=0x7fffffffe638) at /home/terrar/pilight/daemon.c:2270
#8  0x000000000041a71b in main (argc=2, argv=0x7fffffffe638) at /home/terrar/pilight/daemon.c:2708
(gdb) frame 8
#8  0x000000000041a71b in main (argc=2, argv=0x7fffffffe638) at /home/terrar/pilight/daemon.c:2708
2708        int ret = start_pilight(argc, argv);
(gdb) frame 7
#7  0x0000000000419c4c in start_pilight (argc=2, argv=0x7fffffffe638) at /home/terrar/pilight/daemon.c:2270
2270        if(config_read() != EXIT_SUCCESS) {
(gdb) frame 6
#6  0x0000000000421e6d in config_read () at /home/terrar/pilight/libs/pilight/core/config.c:227
227        if(config_parse(root) != EXIT_SUCCESS) {
(gdb) frame 5
#5  0x0000000000421a15 in config_parse (root=0x761a30) at /home/terrar/pilight/libs/pilight/core/config.c:119
119                    if(listeners->parse(jconfig) == EXIT_FAILURE) {
(gdb) frame 4
#4  0x000000000043661d in rules_parse (root=0x76d2e0) at /home/terrar/pilight/libs/pilight/config/rules.c:94
94                        if(event_parse_rule(rule, node, 0, 1) == -1) {
(gdb) frame 3
#3  0x0000000000442545 in event_parse_rule (
    rule=0x76ebc0 "IF stat_sunrise.state IS on AND stat_man.state IS off THEN dim DEVICE spotli TO spotli.dimlevel-maximum FROM spotli.dimlevel-minimum IN vtimesunrise.dimlevel MINUTE",
    obj=0x78ef30, depth=0, validate=1) at /home/terrar/pilight/libs/pilight/events/events.c:1573
1573        if(validate == 1 && depth == 0 && event_parse_action(action, obj, validate) != 0) {
(gdb) frame 2
#2  0x000000000044140c in event_parse_action (action=0x78efa0 "dim DEVICE spotli TO spotli.dimlevel-maximum FROM spotli.dimlevel-minimum IN vtimesunrise.dimlevel MINUTE", obj=0x78ef30, validate=1)
    at /home/terrar/pilight/libs/pilight/events/events.c:1197
1197                                    if((error = event_parse_action_arguments(jchild1->string_, obj, validate)) == 0) {
(gdb) frame 1
#1  0x0000000000440381 in event_parse_action_arguments (arguments=0x78fd40 "spotli.dimlevel-maximum", obj=0x78ef30, validate=1) at /home/terrar/pilight/libs/pilight/events/events.c:940
940                            vallen = strlen(v.string_);
(gdb) frame 0
#0  strlen () at ../sysdeps/x86_64/strlen.S:106
106    ../sysdeps/x86_64/strlen.S: Datei oder Verzeichnis nicht gefunden.
(gdb) q
A debugging session is active.

    Inferior 1 [process 9028] will be killed.

Quit anyway? (y or n) y
root@NOTEBOOK:/#

And my config.json:
Code:
{
    "devices": {
        "stat_sunrise": {
            "protocol": [ "generic_switch" ],
            "id": [{
                "id": 11
            }],
            "state": "off"
        },
        "stat_day": {
            "protocol": [ "generic_switch" ],
            "id": [{
                "id": 12
            }],
            "state": "off"
        },
        "stat_sunset": {
            "protocol": [ "generic_switch" ],
            "id": [{
                "id": 13
            }],
            "state": "off"
        },
        "stat_night": {
            "protocol": [ "generic_switch" ],
            "id": [{
                "id": 14
            }],
            "state": "on"
        },
        "stat_man": {
            "protocol": [ "generic_switch" ],
            "id": [{
                "id": 15
            }],
            "state": "off"
        },
        "statusanzeige": {
            "protocol": [ "generic_label" ],
            "id": [{
                "id": 100
            }],
            "label": "Nacht",
            "color": "green"
        },
        "zeit": {
            "protocol": [ "datetime" ],
            "id": [{
                "longitude": 13.8437,
                "latitude": 48.3428
            }],
            "year": 2015,
            "month": 5,
            "day": 7,
            "hour": 14,
            "minute": 17,
            "second": 6,
            "weekday": 5,
            "dst": 1
        },
        "humi": {
            "protocol": [ "dht11" ],
            "id": [{
                "gpio": 6
            }],
            "humidity": 40.0,
            "temperature": 20.0,
            "poll-interval": 600
        },
        "templio": {
            "protocol": [ "ds18b20" ],
            "id": [{
                "id": "000461235eff"
            }],
            "temperature": 20.000,
            "poll-interval": 600
        },
        "templiu": {
            "protocol": [ "ds18b20" ],
            "id": [{
                "id": "000461239cff"
            }],
            "temperature": 20.000,
            "poll-interval": 600
        },
        "tempreo": {
            "protocol": [ "ds18b20" ],
            "id": [{
                "id": "000461239cff"
            }],
            "temperature": 20.000,
            "poll-interval": 600
        },
        "tempreu": {
            "protocol": [ "ds18b20" ],
            "id": [{
                "id": "0004641794ff"
            }],
            "temperature": 20.000,
            "poll-interval": 600
        },
        "neon": {
            "protocol": [ "relay" ],
            "id": [{
                "gpio": 2
            }],
            "state": "off"
        },
        "fog": {
            "protocol": [ "relay" ],
            "id": [{
                "gpio": 3
            }],
            "state": "off"
        },
        "airfog": {
            "protocol": [ "relay" ],
            "id": [{
                "gpio": 4
            }],
            "state": "off"
        },
        "airair": {
            "protocol": [ "relay" ],
            "id": [{
                "gpio": 5
            }],
            "state": "off"
        },
        "spotli": {
            "protocol": [ "kaku_dimmer" ],
            "id": [{
                "id": 1275,
                "unit": 0
            }],
            "state": "off",
            "dimlevel-minimum": 0,
            "dimlevel-maximum": 7,
            "dimlevel": 0
        },
        "spotre": {
            "protocol": [ "kaku_dimmer" ],
            "id": [{
                "id": 2275,
                "unit": 0
            }],
            "state": "off",
            "dimlevel-minimum": 0,
            "dimlevel-maximum": 7,
            "dimlevel": 0
        },
        "vtempd": {
            "protocol": [ "generic_dimmer" ],
            "id": [{
                "id": 20
            }],
            "state": "on",
            "dimlevel-minimum": 10,
            "dimlevel-maximum": 90,
            "dimlevel": 20
        },
        "vtempn": {
            "protocol": [ "generic_dimmer" ],
            "id": [{
                "id": 21
            }],
            "state": "on",
            "dimlevel-minimum": 10,
            "dimlevel-maximum": 90,
            "dimlevel": 20
        },
        "vtempsli": {
            "protocol": [ "generic_dimmer" ],
            "id": [{
                "id": 22
            }],
            "state": "on",
            "dimlevel-minimum": 35,
            "dimlevel-maximum": 55,
            "dimlevel": 55
        },
        "vtempsre": {
            "protocol": [ "generic_dimmer" ],
            "id": [{
                "id": 23
            }],
            "state": "on",
            "dimlevel-minimum": 35,
            "dimlevel-maximum": 55,
            "dimlevel": 55
        },
        "vtempint": {
            "protocol": [ "generic_dimmer" ],
            "id": [{
                "id": 24
            }],
            "state": "on",
            "dimlevel-minimum": 5,
            "dimlevel-maximum": 60,
            "dimlevel": 20
        },
        "vhumid": {
            "protocol": [ "generic_dimmer" ],
            "id": [{
                "id": 25
            }],
            "state": "on",
            "dimlevel-minimum": 10,
            "dimlevel-maximum": 90,
            "dimlevel": 35
        },
        "vhumin": {
            "protocol": [ "generic_dimmer" ],
            "id": [{
                "id": 26
            }],
            "state": "on",
            "dimlevel-minimum": 10,
            "dimlevel-maximum": 90,
            "dimlevel": 70
        },
        "vhumint": {
            "protocol": [ "generic_dimmer" ],
            "id": [{
                "id": 27
            }],
            "state": "on",
            "dimlevel-minimum": 5,
            "dimlevel-maximum": 60,
            "dimlevel": 20
        },
        "vtimed": {
            "protocol": [ "generic_dimmer" ],
            "id": [{
                "id": 28
            }],
            "state": "on",
            "dimlevel-minimum": 1,
            "dimlevel-maximum": 22,
            "dimlevel": 8
        },
        "vtimesunrise": {
            "protocol": [ "generic_dimmer" ],
            "id": [{
                "id": 29
            }],
            "state": "on",
            "dimlevel-minimum": 1,
            "dimlevel-maximum": 59,
            "dimlevel": 10
        },
        "vtimen": {
            "protocol": [ "generic_dimmer" ],
            "id": [{
                "id": 30
            }],
            "state": "on",
            "dimlevel-minimum": 2,
            "dimlevel-maximum": 23,
            "dimlevel": 13
        },
        "vtimesunset": {
            "protocol": [ "generic_dimmer" ],
            "id": [{
                "id": 31
            }],
            "state": "on",
            "dimlevel-minimum": 1,
            "dimlevel-maximum": 59,
            "dimlevel": 15
        },
        "rlamps": {
            "protocol": [ "generic_switch" ],
            "id": [{
                "id": 32
            }],
            "state": "on"
        },
        "rfog": {
            "protocol": [ "generic_switch" ],
            "id": [{
                "id": 33
            }],
            "state": "on"
        },
        "rfans": {
            "protocol": [ "generic_switch" ],
            "id": [{
                "id": 34
            }],
            "state": "on"
        }
    },
    "rules": {
        "01-set_state_sunrise": {
            "rule": "IF (zeit.hour == vtimed.dimlevel AND zeit.minute <= vtimesunrise.dimlevel) AND stat_sunrise.state IS off AND stat_man.state IS off THEN label DEVICE statusanzeige TO Sonnenaufgang COLOR green AND switch DEVICE stat_sunrise TO on AND switch DEVICE stat_day AND stat_sunset AND stat_night AND stat_man TO off",
            "active": 1
        },
        "02-set_state_day": {
            "rule": "IF ((zeit.hour == vtimed.dimlevel AND zeit.minute > vtimesunrise.dimlevel) OR (zeit.hour < vtimen.dimlevel AND zeit.hour > vtimed.dimlevel)) AND stat_day.state IS off AND stat_man.state IS off THEN label DEVICE statusanzeige TO Tag COLOR green AND switch DEVICE stat_day TO on AND switch DEVICE stat_sunrise AND stat_sunset AND stat_night AND stat_man TO off",
            "active": 1
        },
        "03-set_state_sunset": {
            "rule": "IF (zeit.hour == vtimen.dimlevel AND zeit.minute <= vtimesunset.dimlevel) AND stat_sunset.state IS off AND stat_man.state IS off THEN label DEVICE statusanzeige TO Sonnenuntergang COLOR green AND switch DEVICE stat_sunset TO on AND switch DEVICE stat_sunrise AND stat_day AND stat_night AND stat_man TO off",
            "active": 1
        },
        "04-set_state_night": {
            "rule": "IF ((zeit.hour == vtimen.dimlevel AND zeit.minute > vtimesunset.dimlevel) OR (zeit.hour > vtimen.dimlevel AND zeit.hour <= 23) OR (zeit.hour >= 00 AND zeit.hour < vtimed.dimlevel)) AND stat_night.state IS off AND stat_man.state IS off THEN label DEVICE statusanzeige TO Nacht COLOR green AND switch DEVICE stat_night TO on AND switch DEVICE stat_sunrise AND stat_day AND stat_sunset AND stat_man TO off",
            "active": 1
        },
        "05-set_state_manually": {
            "rule": "IF stat_man.state IS on THEN label DEVICE statusanzeige TO Handbetrieb COLOR red AND switch DEVICE stat_sunrise AND stat_day AND stat_sunset AND stat_night TO off",
            "active": 1
        },
        "06_neon_off_at_sunrise": {
            "rule": "IF stat_sunrise.state IS on AND stat_man.state IS off AND neon.state IS on THEN switch DEVICE neon TO off",
            "active": 1
        },
        "07_neon_on_at_day": {
            "rule": "IF stat_day.state IS on AND stat_man.state IS off AND neon.state IS off THEN switch DEVICE neon TO on",
            "active": 1
        },
        "08_neon_off_at_sunset": {
            "rule": "IF stat_sunset.state IS on AND stat_man.state IS off AND neon.state IS on THEN switch DEVICE neon TO off",
            "active": 1
        },
        "09_neon_off_at_night": {
            "rule": "IF stat_night.state IS on AND stat_man.state IS off AND neon.state IS on THEN switch DEVICE neon TO off",
            "active": 1
        },
                "10_spotli_dim_up_at_sunrise": {
                        "rule": "IF stat_sunrise.state IS on AND stat_man.state IS off THEN dim DEVICE spotli TO spotli.dimlevel-maximum FROM spotli.dimlevel-minimum IN vtimesunrise.dimlevel MINUTE",
                        "active": 1
                },
                "11_spotre_dim_up_at_sunrise": {
                        "rule": "IF stat_sunrise.state IS on AND stat_man.state IS off THEN dim DEVICE spotre TO spotre.dimlevel-maximum FROM spotre.dimlevel-minimum IN vtimesunrise.dimlevel MINUTE",
                        "active": 1
                },
                "12_spotli_dim_down_at sunset": {
                        "rule": "IF stat_sunset.state IS on AND stat_man.state IS off THEN dim DEVICE spotli TO spotli.dimlevel-minimum FROM spotli.dimlevel IN vtimesunrise.dimlevel MINUTE",
                        "active": 1
                },
                "13_spotre_dim_down_at sunset": {
                        "rule": "IF stat_sunset.state IS on AND stat_man.state IS off THEN dim DEVICE spotre TO spotre.dimlevel-minimum FROM spotre.dimlevel IN vtimesunrise.dimlevel MINUTE",
                        "active": 1
                },
                "14_spotli_off_when_dimlevel_0": {
                        "rule": "IF spotli.dimlevel == 0 AND spotli.state IS on THEN switch DEVICE spotli TO off",
                        "active": 1
                },
                "15_spotre_off_when_dimlevel_0": {
                        "rule": "IF spotre.dimlevel == 0 AND spotre.state IS on THEN switch DEVICE spotre TO off",
                        "active": 1
                },
                "16_spotli_dimlevel_to_0_at_night": {
                        "rule": "IF stat_night.state IS on AND stat_man.state IS off THEN dim DEVICE spotli TO 0",
                        "active": 1
                },
                "17_spotre_dimlevel_to_0_at_night": {
                        "rule": "IF stat_night.state IS on AND stat_man.state IS off THEN dim DEVICE spotre TO 0",
                        "active": 1
                }
    },
    "gui": {
        "stat_man": {
            "name": "manuelle Steuerung",
            "group": [ "Terrarium" ],
            "media": [ "all" ],
            "readonly": 0
        },
        "stat_sunrise": {
            "name": "Sonnenaufgang (TESTPHASE)",
            "group": [ "Terrarium" ],
            "media": [ "all" ],
            "readonly": 1
        },
        "stat_day": {
            "name": "Tag (TESTPHASE)",
            "group": [ "Terrarium" ],
            "media": [ "all" ],
            "readonly": 1
        },
        "stat_sunset": {
            "name": "Sonnenuntergang (TESTPHASE)",
            "group": [ "Terrarium" ],
            "media": [ "all" ],
            "readonly": 1
        },
        "stat_night": {
            "name": "Nacht (TESTPHASE)",
            "group": [ "Terrarium" ],
            "media": [ "all" ],
            "readonly": 1
        },
        "statusanzeige": {
            "name": "aktueller Programmstatus",
            "group": [ "Terrarium" ],
            "media": [ "all" ]
        },
        "zeit": {
            "name": "Uhrzeit",
            "group": [ "Terrarium" ],
            "media": [ "all" ]
        },
        "humi": {
            "name": "Temperatur / Luftfeuchtigkeit - allgemein",
            "group": [ "Terrarium" ],
            "media": [ "all" ]
        },
        "templio": {
            "name": "Temperatur Wärmeplatz links",
            "group": [ "Terrarium" ],
            "media": [ "all" ]
        },
        "tempreo": {
            "name": "Temperatur Wärmeplatz rechts",
            "group": [ "Terrarium" ],
            "media": [ "all" ]
        },
        "templiu": {
            "name": "Temperatur Schattenplatz links",
            "group": [ "Terrarium" ],
            "media": [ "all" ]
        },
        "tempreu": {
            "name": "Temperatur Schattenplatz rechts",
            "group": [ "Terrarium" ],
            "media": [ "all" ]
        },
        "fog": {
            "name": "Zerstäuber",
            "group": [ "Terrarium" ],
            "media": [ "all" ]
        },
        "airfog": {
            "name": "Lüfter Zerstäuber",
            "group": [ "Terrarium" ],
            "media": [ "all" ]
        },
        "airair": {
            "name": "Lüfter Frischluft",
            "group": [ "Terrarium" ],
            "media": [ "all" ]
        },
        "neon": {
            "name": "T5 Neonleuchten",
            "group": [ "Terrarium" ],
            "media": [ "all" ]
        },
        "spotli": {
            "name": "SPOT Wärmeplatz links",
            "group": [ "Terrarium" ],
            "media": [ "all" ]
        },
        "spotre": {
            "name": "SPOT Wärmeplatz rechts",
            "group": [ "Terrarium" ],
            "media": [ "all" ]
        },
        "vtempd": {
            "name": "Temperatur TAG °C ( - 2 / + 2 )",
            "group": [ "Config" ],
            "media": [ "all" ]
        },
        "vtempsli": {
            "name": "Temperatur Spot links TAG °C ( - 2 / + 2 )",
            "group": [ "Config" ],
            "media": [ "all" ]
        },
        "vtempsre": {
            "name": "Temperatur Spot rechts TAG °C ( - 2 / + 2 )",
            "group": [ "Config" ],
            "media": [ "all" ]
        },
        "vtempn": {
            "name": "Temperatur NACHT °C ( - 2 / + 2 )",
            "group": [ "Config" ],
            "media": [ "all" ]
        },
        "vtempint": {
            "name": "Intervall Temperaturkorrektur",
            "group": [ "Config" ],
            "media": [ "all" ]
        },
        "vhumid": {
            "name": "Luftfeuchtigkeit TAG % ( - 5 / + 5 )",
            "group": [ "Config" ],
            "media": [ "all" ]
        },
        "vhumin": {
            "name": "Luftfeuchtigkeit NACHT % ( - 10 / + 10 )",
            "group": [ "Config" ],
            "media": [ "all" ]
        },
        "vhumint": {
            "name": "Intervall Luftfeuchtigkeitskorrektur",
            "group": [ "Config" ],
            "media": [ "all" ]
        },
        "vtimed": {
            "name": "Beginn TAG",
            "group": [ "Config" ],
            "media": [ "all" ]
        },
        "vtimesunrise": {
            "name": "Dauer Sonnenaufgang",
            "group": [ "Config" ],
            "media": [ "all" ]
        },
        "vtimen": {
            "name": "Beginn NACHT",
            "group": [ "Config" ],
            "media": [ "all" ]
        },
        "vtimesunset": {
            "name": "Dauer Sonnenuntergang",
            "group": [ "Config" ],
            "media": [ "all" ]
        },
        "rlamps": {
            "name": "Lampen automatisch steuern",
            "group": [ "Regeln" ],
            "media": [ "all" ]
        },
        "rfans": {
            "name": "Lüfter automatisch steuern",
            "group": [ "Regeln" ],
            "media": [ "all" ]
        },
        "rfog": {
            "name": "Nebler automatisch steuern",
            "group": [ "Regeln" ],
            "media": [ "all" ]
        }
    },
    "settings": {
        "log-level": 4,
        "pid-file": "/var/run/pilight.pid",
        "log-file": "/var/log/pilight.log",
        "receive-repeats": 1,
        "webserver-enable": 1,
        "webserver-root": "/usr/local/share/pilight/",
        "webserver-port": 5001,
        "webserver-cache": 1
    },
    "hardware": {
        "433nano": {
            "comport": "/dev/ttyUSB3"
        }
    },
    "registry": {
        "webgui": {
            "tabs": 1
        },
        "pilight": {
            "firmware": {
                "version": 1,
                "lpf": 8,
                "hpf": 1600
            },
            "version": {
                "current": "6.0"
            }
        }
    }
}

I removed some older posts with unneeded content in this thread.
Terrarium:  RPi Model B Rev 2 / pilight 8.1.2 / stretch
Aquarium: RPi Model B Plus Rev 1.2 / pilight 8.0.6 / jessie
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Windows Support curlymo 35 18,476 06-10-2018, 04:40 PM
Last Post: Leo
  Odroid C2 support on Kernel 4.14 Jojo 5 667 06-01-2018, 03:19 PM
Last Post: curlymo
  Mac OS X support andies 4 1,936 12-01-2016, 09:48 PM
Last Post: andies
  Odroid-C1 support terrar 51 20,355 05-31-2016, 11:08 AM
Last Post: Jojo
Question radxa support terrar 57 19,125 01-05-2015, 06:58 PM
Last Post: curlymo
  [Solved] Disabled PHP support error lvdp 4 5,451 02-18-2014, 12:02 AM
Last Post: meloen
  Node support changed? koffie 19 9,189 01-12-2014, 05:44 PM
Last Post: curlymo

Forum Jump:


Browsing: 1 Guest(s)