• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[v7.0 > v...] Errors with the latest nightly
#1
For all nightly related errors and bugs.
 
Reply
#2
I use nightly and I got this error:

"pilight-daemon: ERROR: config device #2 "outside", missing protocol"

I saw openweathermap during the compile so I dont understand what is wrong. It worked with Pilight6.

Config file:
Code:
"outside": {
    "name": "outside",
    "temperature": {
        "name": "Temperature",
        "protocol": [
            "openweathermap"
        ],
        "id": [
            {
                "location": "london",
                "country": "uk"
            }
        ],
        "humidity": 7600,
        "temperature": 700,
        "sunrise": 1,
        "sunset": 700,
        "sun": "set"
    }
},
 
Reply
#3
The format of the config JSON has been changed a bit, you need to redefine your device. Devices also no longer have a "name" key, this is defined in the "gui" section.
 
Reply
#4
This also didn't work in pilight 6 because the config change was already implemented back then.
 
Reply
#5
Yesterday I tried to compile on my Raspberry Pi 2 pilight version e70b92c and today version 884bc3c but I always get:
Code:
CMakeFiles/pilight-control.dir/build.make:86: recipe for target 'pilight-control' failed
make[2]: *** [pilight-control] Error 1
CMakeFiles/Makefile2:95: recipe for target 'CMakeFiles/pilight-control.dir/all' failed
make[1]: *** [CMakeFiles/pilight-control.dir/all] Error 2
Makefile:133: recipe for target 'all' failed
make: *** [all] Error 2

I never had this problem before.
 
Reply
#6
Should be all fixed again.
 
Reply
#7
Works again, thanks
 
Reply
#8
In nightly v7.0-30-g6becc0d there seems to be a bug in the handling of webgui commands.
When websockets = 0 flipping a switch in the gui does not result in sending the command.
When websockets = 1 everything works fine and also 7.0 stable is ok (even with websockets = 0).
 
Reply
#9
Hi,

I am facing a 404 error while trying to update:
Code:
W: Failed to fetch http://apt.pilight.org/dists/development/main/binary-armhf/Packages  404  Not Found

E: Some index files failed to download. They have been ignored, or old ones used instead.
Has the repo changed or something else?
Thx!
 
Reply
#10
No, there is just no development package available at the moment.
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  hardware module issues in nightly apartmedia 17 1,216 04-05-2019, 06:59 PM
Last Post: curlymo
  Update to v8.0.10-nightly-a1279212 Ulrich.Arnold 3 1,245 06-04-2018, 08:31 PM
Last Post: curlymo
  Updates for nightly Ulrich.Arnold 1 555 01-26-2018, 07:31 PM
Last Post: curlymo
  how to complete remove nightly terrar 8 5,477 04-03-2016, 07:04 PM
Last Post: mvasi90
  new install fails - dev/nightly gneandr 11 9,311 01-29-2016, 11:30 AM
Last Post: WEBcast
  pilight7 from Stable --> Nightly gneandr 10 3,163 01-19-2016, 04:15 PM
Last Post: gneandr
  Rest API in nightly Image seems not to work spooniester 2 2,001 06-25-2015, 10:07 AM
Last Post: spooniester
  [v6.0 > v7.0] Errors with the latest nightly curlymo 153 36,616 05-23-2015, 10:55 PM
Last Post: koos147
  Nightly upgrades troccolo 2 1,593 04-17-2015, 09:34 AM
Last Post: troccolo
  [v5.0 > v6.0] Errors with install latest Nightly mike 208 43,370 02-23-2015, 10:11 PM
Last Post: curlymo

Forum Jump:


Browsing: 1 Guest(s)