• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register

pilight - forum / Hardware / Electronics / Low-pass Filter wiring /

Low-pass Filter wiring
hazzard Offline
Junior Member

**
Posts: 21
Threads: 3
Joined: Jun 2015
Reputation: 0
#1
06-24-2015, 03:53 PM
Hey,

i got just one short Question Smile
I managed to install an Attiny45 as LPF, after the Installation of the LPF-Firmware can i unplug some of the GPIO's ?
Are the GPIO's RESET,SCK,MISO,MOSI only needed to Flash the Firmware? Or must they stay plugged in?

Regards Marc
 
Reply
curlymo Offline
Administrator

*******
Posts: 7,238
Threads: 92
Joined: Aug 2013
Reputation: 76
#2
06-24-2015, 05:10 PM
Only used for flashing.
Please read our forum rules (before you post).
 
Reply
Scarala Offline
Member

***
Posts: 57
Threads: 8
Joined: Nov 2014
Reputation: 0
#3
11-08-2015, 10:21 AM
Is there a chance to get a Firmware for the filter to bypass it?
I´d like to test the effectivity of the Filter for me without soldering...
 
Reply
curlymo Offline
Administrator

*******
Posts: 7,238
Threads: 92
Joined: Aug 2013
Reputation: 76
#4
11-08-2015, 10:50 AM
Just directly connect the receiver without using the filter in between.
Please read our forum rules (before you post).
 
Reply
woutput Offline
Member

***
Posts: 62
Threads: 5
Joined: Aug 2015
Reputation: 1
#5
11-15-2015, 08:35 AM
I agree with @Scarala that a test-firmware = pass-through is useful in many cases. Even automated comparison testing could be implemented.
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Bandpass filter problem mayonezo 16 9,826 07-21-2022, 11:14 PM
Last Post: DashWUsero
Rainbow Lowpass filter - how DOES it work? DE8MSH 16 10,687 04-17-2020, 10:13 PM
Last Post: curlymo
Question Passive Component Band-pass filter ripper121 8 5,054 12-16-2017, 01:38 AM
Last Post: wo_rasp
  Filter kit in 315 receiver? ceandre 1 2,353 04-14-2017, 10:10 PM
Last Post: wo_rasp
  Low Pass Filter and Receiver in Series? re-post Gustavo Woltmann 1 2,571 03-08-2017, 05:25 PM
Last Post: pilino1234
  Filter settings in config.json Saiyato 100 61,782 02-22-2017, 08:24 AM
Last Post: wo_rasp
  Low Pass Filter and Receiver in Series? Hauke 3 5,019 08-30-2016, 08:25 AM
Last Post: wo_rasp
  New filter version curlymo 0 2,490 04-02-2016, 08:05 AM
Last Post: curlymo
  Band-pass filter parts curlymo 60 90,334 01-08-2016, 12:23 AM
Last Post: gneandr
  low pass filter francois.leprieur 3 4,301 12-20-2015, 10:18 AM
Last Post: curlymo

Forum Jump:


Browsing: 1 Guest(s)