• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Protocoll clarus_switch didn´t work
#1
Hello together.

My problem is, that the clarus_switch protocoll didn´t work.
I´ve tested the sender an receiver module with 2 terminal windows.
Sender and receiver works.
Code:
"message": {
                "id": "F0",
                "unit": 1,
                "state": "off"
        },
        "origin": "receiver",
        "protocol": "clarus_switch",
        "uuid": "0000-b8-27-eb-6de740",
        "repeats": 4
This is what pilight-receive give back to me, when i´ve pressed the remote button "on".

Code:
pi@raspberrypi ~ $ pilight-send -p clarus_switch -i=F0 -u=1 -t
pi@raspberrypi ~ $ pilight-send -p clarus_switch -i="F0" -u="1" -t
pi@raspberrypi ~ $ pilight-send -p clarus_switch -u 1 -i F0 -t
pi@raspberrypi ~ $ pilight-send -p clarus_switch -u 1 -i F0 -f
pi@raspberrypi ~ $ pilight-send -p clarus_switch -u=1 -i=F0 -t
pi@raspberrypi ~ $ pilight-send -p clarus_switch -u="1" -i="F0" -t
pi@raspberrypi ~ $ pilight-send -p clarus_switch -u=1 -i=F0 -t
pi@raspberrypi ~ $ pilight-send -p clarus_switch -i A2 -u 24 -t
pi@raspberrypi ~ $ pilight-send -p clarus_switch -i FO -u 1 -t
pi@raspberrypi ~ $ pilight-send -p clarus_switch -i F0 -u 1 -t
This is what i´ve tried to get my wireless socket "on".
But nothing of this combination works.

Any ideas, or another protocol that is simillar ?

greez@all
Sash
 
Reply
#2
Please post by using code tags.
 
Reply
#3
Hi, this is an older entry. But i have the same problem.

What is "
(09-29-2015, 08:34 PM)curlymo Wrote: Please post by using code tags.

Regards Areon
 
Reply
#4
It was a bug in clarus_switch implementation. It did not recognize the --id you pass on the command line. Has already been fixed in development branch.
 
Reply
#5
Quote:It was a bug in clarus_switch implementation. It did not recognize the --id you pass on the command line. Has already been fixed in development branch.

Sure? Just installed nightly yesterday, but my clarus sockets dont care about the signals i send.
 
Reply
#6
Currently nightly != developmental; there are no up-to-date nightlies at the moment. Instead, you will need to compile the development branch of the pilight github. The manual has step by step instructions on how to do that.
 
Reply
#7
Oh, well, didnt know that.
Going to Github, thanks
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
Question [Solved] Openweathermap with pilight 7.0-40 doesn't work Seebueb 2 868 01-01-2020, 06:45 PM
Last Post: Seebueb
  pilight v8.0 - Current work in progress curlymo 32 44,432 12-06-2018, 10:06 PM
Last Post: curlymo
Exclamation Brennenstuhl 433MHz RC C1 - pilight not work pitje87 0 915 10-31-2018, 12:38 PM
Last Post: pitje87
  [solved] kwmobile: repeating the remote signal doesn't work dawncrow 9 1,807 10-25-2018, 03:46 PM
Last Post: dawncrow
  cannot get pilight-flash to work n.kooij 7 2,398 07-21-2018, 02:52 PM
Last Post: Tamadite
  pilight-receive does not work RP3 UniCorny 9 3,816 04-10-2018, 07:03 AM
Last Post: honselbonsel
  pilight webGUI doesn't work - pilight not on a Pi carlos4018 11 2,778 01-23-2018, 10:18 PM
Last Post: morph027
  Sending does not work under Linux, only under Windows mark78 17 4,211 01-17-2018, 06:34 PM
Last Post: curlymo
  pilight-receive does not work correctly docingo 4 1,672 12-11-2017, 08:34 PM
Last Post: docingo
  Pollin Switches- one switch don't work soulrebell 11 3,316 11-13-2016, 02:59 PM
Last Post: wo_rasp

Forum Jump:


Browsing: 1 Guest(s)