• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bug report: WIFI dongle stops when gpio_switch.gpio = 20
#11
(12-30-2017, 09:41 AM)zackdvd Wrote: Hey, any news on that?

Not from my side.
 
Reply
#12
Does the error still apply to pilight version 8?
 
Reply
#13
OK, just for my problems (no solved):

I want to use GPPIO20 and GPIO21 on a Raspberry Pi B+.
On the spec in page http://wiringx.org you cannot find them. So I referred to the picture from a post here: #3.
There GPIO20 refers to wiringx pin 27, but somehow marked as broken. On wiringx there is only GPIO 27 and 29.
For B+ that is GPIO20 and 21!

So, for B+ board it is:
HW PIN 38;  GPIO20;  WiringX 28
HW PIN 40;  GPIO21;  WiringX 29


I don't use wifi, eth0 is working.
 
Reply
#14
Please refer to the wiringx manual for the pilight >= 8 pinning:
https://manual.wiringx.org/en/platform-r...ypi1abplus
 
Reply
#15
(12-30-2017, 09:09 PM)curlymo Wrote: Please refer to the wiringx manual for the pilight >= 8 pinning:
https://manual.wiringx.org/en/platform-r...ypi1abplus

Thanks a lot, I really did not find these pages before. 
But I do not search for it, because on the main wiringx page the informations are for:
"Raspberry Pi (1; A, B, A+, and B+)"
And at least for B+ this is partially wrong.
 
Reply
#16
And on the other pilight manual?
 
Reply
#17
(01-03-2018, 06:40 PM)curlymo Wrote: And on the other pilight manual?

The link you posted was perfect (at least for wiringx Pins 28+29) and helped me !
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  ERROR: The Broadcom 2835 GPIO 0 is not set to output mode stuckinger 10 762 05-07-2019, 09:11 PM
Last Post: curlymo
  communication between main daemon and clientized daemon stops tomk 29 1,780 05-06-2019, 08:57 PM
Last Post: curlymo
  AdHoc network with 2 Raspberry and 2 GPIO transmitter not working webdandy 29 6,503 09-06-2017, 02:39 PM
Last Post: wseifert
  development, orangepi pc+, "no gpio-platform configured" Twain 1 2,197 06-01-2017, 05:51 PM
Last Post: curlymo
  Reset of GPIO ports / Detection of mobile phone NormBot 1 1,345 09-02-2016, 08:30 AM
Last Post: wo_rasp
Bug Bug report: double free or corruption (!prev) diman87 16 5,086 03-09-2016, 11:10 AM
Last Post: diman87
Bug Bug report: segmentation fault using rule with AFTER woutput 3 2,533 11-22-2015, 12:27 PM
Last Post: woutput
  invalid gpio range koos147 2 1,922 11-02-2015, 08:40 AM
Last Post: woutput
  GPIO for other application koos147 1 1,616 10-31-2015, 08:08 PM
Last Post: pilino1234
Bug Bug report: gpio_switch does not accept high pin numbers woutput 2 2,361 10-12-2015, 03:54 PM
Last Post: woutput

Forum Jump:


Browsing: 1 Guest(s)