• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


pilight DIY PCB Kits
#51
Is it possible to get the Eagle files for the PCB? I am starting to learn how to design my own PCBs and the pilight interface would be perfect to tinker.

I have found an older eagle file from Marten Jacobs, but did not find any for the v1.0 design..
 
Reply
#52
The person who made them for me didn't allow me to make them open source.
 
Reply
#53
Hi. Is there somewhere a list of all needed components. Especially which kind of voltage regulators are used at the PCB. Thx,markus
 
Reply
#54
I've added it to the first post:
https://forum.pilight.org/showthread.php...s#pid15250
 
Reply
#55
Hi
I hope somone can help me.
 
I’ve ordered a while ago a PCB full kit.
 
Now I try to solder the kit and I recognized that I have different resistors as in your soldering guide.
 
I’ve got 5 1k resistors and 3 10k resistors but in your guide I see only 1k resistors and a friend has also only 1k resistors in his PCB kit.
 
Where do I have to connect the 10k resistors and where the 1k resistors?

Thank you very much
 
Cheers dikey
 
Reply
#56
How long ago was that, because the last two years i been using a box of 25.000 1k resistors of which i'm quite sure doesn't contain 10k resistors.
 
Reply
#57
(07-27-2019, 08:33 AM)curlymo Wrote: How long ago was that, because the last two years i been using a box of 25.000 1k resistors of which i'm quite sure doesn't contain 10k resistors.
]


I do not remember exactly when I ordered my kit, but my friend got his at about the same time. I have ordered it December 2017 or early 2018. But that does not really matter.

Can you help me to solder the PCB kit?

Should I simply replace the 10k with 1k resistors?
Is that even possible with my parts?

What exactly is the difference between the 1k and 10k resistors in the circuit? ... and where would I solder the 3 10k?

Thank you
regards dikey
 
Reply
#58
(07-27-2019, 02:13 PM)dikey Wrote:
(07-27-2019, 08:33 AM)curlymo Wrote: How long ago was that, because the last two years i been using a box of 25.000 1k resistors of which i'm quite sure doesn't contain 10k resistors.
]


I do not remember exactly when I ordered my kit, but my friend got his at about the same time. I have ordered it December 2017 or early 2018. But that does not really matter.

Can you help me to solder the PCB kit?

Should I simply replace the 10k with 1k resistors?
Is that even possible with my parts?

What exactly is the difference between the 1k and 10k resistors in the circuit? ... and where would I solder the 3 10k?

Thank you
regards dikey

Sorry, I have 5 10k and 3 1k resistors.
 
Reply
#59
I can't guarantee functionality with different resistor values. Mail me your address and i'll sent you the right ones. Although i still think it's quite wierd you got wrong ones from me.
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  pilight 8.0 / wiringx / receive ATTINY-TX wupperpi 5 1,063 01-18-2018, 02:24 PM
Last Post: wupperpi
  pilight nano usb over Wifi for routers without USB port frenchie71 14 5,225 11-12-2017, 10:36 AM
Last Post: frenchie71
  pilight, Raspberry Pi and sensors for sale kid2000 0 924 04-07-2017, 05:04 PM
Last Post: kid2000
  parts for pilight rikeshe 4 1,698 12-10-2016, 09:02 PM
Last Post: rikeshe
  No pilight-[debug/raw/learn] signals received bassabaws 8 6,411 04-14-2016, 11:35 PM
Last Post: wo_rasp
  Experiences with the pilight DIY PCB Kits troccolo 112 33,527 03-05-2016, 11:21 AM
Last Post: curlymo
  Use existing wall switch with correct status in pilight? kylex 0 1,215 01-13-2016, 01:27 AM
Last Post: kylex
  For Sale own-made pilight shield. Luppie 3 2,573 10-31-2015, 11:23 AM
Last Post: Luppie
  control sockets with pilight (broken remote) mistera 16 9,977 05-15-2015, 07:16 PM
Last Post: Seebueb
  pilight USB nano for sale? diman87 2 2,683 05-05-2015, 06:34 PM
Last Post: diman87

Forum Jump:


Browsing: 1 Guest(s)