• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[Fully Supported] Conrad RSL Switch
@hottec,
Time permitting I may start digging into it in early December, as I have some RSL switches in my drawer. As far as I have tested it some time ago, the RSL switches from CONRAD support/use several different protocols, depending on the set up of the switch, i got some of them working but I agree there is still some work to do.

@MorfelPi,
Would you be interested to summarize your findings by supporting the writeup of the technical part in the WIKI ?
 
Reply
Hi @all

The Conrad RSL Protocol seems to not too easy so I decided to collect all Raw Samples of this thread and write them into a List. Beside the Raw Codes you can find the corresponding Thread ID and sometimes a link to the device, which was used to generate the RAW Data.
The Excel file contains two tabs. One can be used to copy text file into the table.
The secont tab can be used to extract a protocol. It contains only every second pulse since the protocol is manchester coded.

I found out, that there are at least 2 different type of protocols:
- Most of the Commands start with the sequence long short short long. The On/Off flag could not be identified, as far as I understood the discussion.

- my DoorContact Sensors start with the sequence short long short long and seem to have a defined On/Off Flag in Pulse 9+10. Therefore the Information I wrote in #127 is only useful for the second type of sensors. A protocol with Prefix, State and Suffix would be suffitient for this type of code, but not for the first one.

It would be nice, if we could find an implementation, with supports both types of protocols.
I hope this summary helps to find out more about the protocol. Feel free to update the files and add additional devices.

Best regards
Morfel


Attached Files
.txt   ConradRslSummary.txt (Size: 36.41 KB / Downloads: 12)
.xls   ConradRslSummary.xls (Size: 554 KB / Downloads: 12)
 
Reply
(10-30-2016, 11:29 AM)wo_rasp Wrote: @MorfelPi,
Would you be interested to summarize your findings by supporting the writeup of the technical part in the WIKI ?

I could write something into the Wiki, but right now I'm not sure, which protocol should be described. From my point of view the only information, which seems to be sure right now is, that the protocol consist of 66 manchester coded pulses with a defined length. So I would prefer to find out more about the protocol and then write a short description of the protocol.

Best regards
Morfel
 
Reply
can a programmer fix the protocol or repair it? i still wait a long time.
i have two of that conrad devices, but i can not use them with pilight. :-(
thanks
 
Reply
Did you already post debug output for all buttons of all remotes and a photo of both remotes?
 
Reply
this 14 sites post tells a lot about the conrad door switch. other users hast posted the information, if you read that. but nobody will do anything for the conrad rsl protocol. this post must be changed in not supported for conrad door switch. i still have wait for a long time. now i put the conrad door switch into a trash bin. sorry
i think this pilight project will die for me....
 
Reply
I've read the posts, but i still need as much info as you can provide me.
 
Reply
after update to pilight 8 my Conrad RSL switch stoped working,

here is the debug output of my switch..



Switch ON

Quote:1230 615 615 1230 1230 615 1230 615 1230 615 615 1230 615 1230 1230 615 615 1230 615 1230 615 1230 615 1230 615 1230 615 1230 615 1230 615 1230 1230 615 615 1230 1230 615 615 1230 1230 615 615 1435 1230 615 615 1230 615 1230 1230 615 615 1230 615 1230 1230 615 615 1230 615 1230 1230 615 1025 6970


Switch OFF

Quote:1300 580 520 1240 1300 540 1280 580 560 1280 1320 540 560 1300 1260 600 540 1240 560 1260 640 1220 560 1260 580 1280 580 1280 600 1340 480 1260 1260 560 560 1280 1240 580 560 1260 1280 600 580 1340 1220 600 560 1260 600 1220 1260 560 560 1260 560 1260 1300 560 560 1300 560 1300 1280 560 1120 7000


it is an simply ON/OFF wireless Wall switch.


but pilight-receive gives now always the same output, State is always OFF, even if i put the ON button it says OFF

Quote:{
"message": {
"id": 6,
"unit": 5,
"state": "off"
},
"origin": "receiver",
"protocol": "conrad_rsl_switch",
"uuid": "0000-b8-27-eb-f6582f",
"repeats": 6
}


in pilight 7 pilight-receive shows 2 devices, one with ID 6 and status Always OFF and one with ID 1 that worked for me,


Quote:{
"message": {
"id": 6,
"unit": 5,
"state": "off"
},
"origin": "receiver",
"protocol": "conrad_rsl_switch",
"uuid": "0000-b8-27-eb-f6582f",
"repeats": 2
}
{
"message": {
"id": 1,
"unit": 2,
"state": "on"
},
"origin": "receiver",
"protocol": "conrad_rsl_switch",
"uuid": "0000-b8-27-eb-f6582f",
"repeats": 1
}

now pilight dont show ID 1 anymore, it shows only that device with ID 6 but from pilight i can control it with that id 1, but it doesnt update the status anymore in pilight if i use the switch
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  [SOLVED] Home Assistant switch gpio segalion 5 765 09-10-2018, 12:39 PM
Last Post: segalion
  pilight 8.1 and switch with date and time not working Pikeman 7 923 06-30-2018, 11:28 PM
Last Post: curlymo
  [Supported] Alecto WS4500 / WS3500 | Ventus W177 Tommybear1979 229 55,321 06-01-2018, 10:06 AM
Last Post: DieterD62
  pilight-send for like rc-switch "send" mindau 1 1,428 01-18-2018, 07:46 AM
Last Post: madmoses
  Conrad RSL Support Druide85 1 1,159 11-03-2017, 10:34 AM
Last Post: MorfelPi
  rev switch: maybe mismatch in sending on and off codes picrafter 2 1,552 04-15-2017, 02:49 PM
Last Post: redraid
  How to use pilight with raspberry Pi and Conrad 433mhz apbonn 0 1,293 03-30-2017, 10:56 AM
Last Post: apbonn
  Problem with a Switch rule viper2035 2 1,265 01-12-2017, 04:33 PM
Last Post: viper2035
  Light Switch with integrated ON/OFF Button ilir@ademi.org 4 1,878 01-04-2017, 09:22 PM
Last Post: ilir@ademi.org
  Supported shutter belt winders. muecke 0 702 12-18-2016, 12:02 PM
Last Post: muecke

Forum Jump:


Browsing: 1 Guest(s)