• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Firmware selection for Low pass filter should be explained.
#1
I read https://wiki.pilight.org/doku.php/low-pass_filter and in the beginning it says:

Quote:"To install a low-pass filter, use an Atmel ATTiny25, ATTiny45, or ATTiny85 microcontroller...".

Then there are a command for flashing the firmware:

Code:
sudo pilight-flash -f /etc/pilight/pilight_firmware_t45_v3.hex

It should be noted that there are different firmwares for different cpus:

Code:
ls /etc/pilight/
config.json          pilight_firmware_t25_v3.hex  pilight_firmware_t85_v3.hex  pilight_usb_nano.hex
config.json-default  pilight_firmware_t45_v3.hex

A firmware for a '45 wont work on a '25. So it would be good if the page pointed out that you must select the correct firmware for your device.
 
Reply
#2
Any user with a forum login can edit the wiki, so feel free to add this information to the LPF page. That's how a community wiki works after all Wink
 
Reply
#3
Ok that true Smile
So I added some text on the Wiki.
 
Reply
#4
Looks good, thanks! Smile
 
Reply
  


Forum Jump:


Browsing: 1 Guest(s)