• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to send custom code?
#1
Question 
Hello, I'm new here. Try to switch on my LED Panel by 433MHz Controll. I used a arduino to sniff by rc-switch and i got a numbercode. I can send this code by arduino and the LED panel turns on.

So now i try to send with pilight and see realy fast this programm works completly by other way. I think ok, sniff again by "step by step howto" now i got very confusied, the received code looks completly other

This was only the "ON" Button, pressed short and one times.
Code:
{
        "message": {
                "systemcode": 31,
                "unitcode": 15,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "heitech",
        "uuid": "0000-b8-27-eb-ec2b7c",
        "repeats": 1
}
{
        "message": {
                "unitcode": 775509,
                "state": "closed"
        },
        "origin": "receiver",
        "protocol": "ev1527",
        "uuid": "0000-b8-27-eb-ec2b7c",
        "repeats": 1
}
{
        "message": {
                "systemcode": 1023,
                "unitcode": 15,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "elro_800_switch",
        "uuid": "0000-b8-27-eb-ec2b7c",
        "repeats": 1
}

this is the code i got by arduino (this are nearly all buttons on my remote controller, "11184659" is the "ON" button
Code:
Empfangen: 11184641        #Heller
Empfangen: 11184647        #Dunkler
Empfangen: 11184653        #Play/Pause
Empfangen: 11184659        #Ein/Aus
Empfangen: 11184642        #Farbe: Rot
Empfangen: 11184648        #Farbe: Grün
Empfangen: 11184654        #Farbe: Blau
Empfangen: 11184660        #Farbe: Weiss
Empfangen: 11184643        #Farbe: Orange
Empfangen: 11184649        #Farbe: Gelb
Empfangen: 11184655        #Farbe: Hellblau
Empfangen: 11184661        #Farbe: Rosa
Used hardware:
Arduino nano v3
Arduino Uno/Genuino
Raspberry PI 3 B
Fs1000A
MX-RM-5V

i have tryed to send by protocols there send but nothing happend and 2 of this 3 protocols can't send Crying
use the latest build "pilight-daemon version v7.0-241-gb3b0941"

can someone explain me how to send this code with pilight?
i used debug mode and send this to one file, but i think i got to much noise at the receiver. It's realy recommanded to use a filter?
 
Reply
#2
no one can help me?
or explain what i do wrong?
 
Reply
#3
http://manual.pilight.org/faq.html#the-g...s-not-work
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  pilight-send does not stop (terminate) va13 3 677 05-15-2019, 06:06 PM
Last Post: curlymo
  Raw code from pilight-debug always different koy 3 955 07-12-2018, 06:58 PM
Last Post: curlymo
  RSL366 receive fine, can't send? pukington 2 627 02-15-2018, 11:04 AM
Last Post: pukington
  pilight-send for like rc-switch "send" mindau 1 1,462 01-18-2018, 07:46 AM
Last Post: madmoses
  send-repeats and elro_800_switch Tiberian 2 1,123 11-04-2017, 06:24 PM
Last Post: Tiberian
  pilight send URLEncode sibi 0 807 07-17-2017, 08:59 PM
Last Post: sibi
  i can send alright - no luck receiving varmluft 3 1,224 02-26-2017, 09:16 PM
Last Post: wo_rasp
  What to do after receiving code? trxit 3 1,560 10-21-2016, 06:05 PM
Last Post: wo_rasp
  Send and receiver at same time impossible geerttttt 5 1,728 06-03-2016, 11:58 AM
Last Post: wo_rasp
  send mail only once muecke 1 940 05-08-2016, 01:47 PM
Last Post: pilino1234

Forum Jump:


Browsing: 1 Guest(s)