• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Passive Component Band-pass filter
#1
Question 
Hi all,
is it possible to do the Band Pass Filter with passive Components?
Because then there is no need to flash a µC.


With best regards
Ripper121
 
Reply
#2
If you can build one, please do!
 
Reply
#3
Which frequencys should be passed and which one not?
 
Reply
#4
433.92Mhz
 
Reply
#5
Are you sure?
Because the Atiny85 FW checks for
MIN_PULSELENGTH = ( shortest expected pulse - 10% ) / 10
MAX_PULSELENGTH = ( longest expected pulse + 10% ) / 10
and not for a freq.

I think you can use this.
A Saw filter when you really filter 433 with the Attiny85.

https://www.digikey.ca/product-detail/en...ND/3307725
 
Reply
#6
You meant the pulse frequency?
 
Reply
#7
You said the pass freq is 433.92Mhz.
The attiny85 (your lowpassfilter) is filtering this freq. 433.92Mhz.

When i take a look at the github of the firmware for the attiny85 it says:
MIN_PULSELENGTH = ( shortest expected pulse - 10% ) / 10
MAX_PULSELENGTH = ( longest expected pulse + 10% ) / 10

So I'm not sure if the attiny85 filter really the 433.92Mhz or anything else.
 
Reply
#8
The ATTiny should pass through 433.92Mhz, that what the receiver receives. The pulse lengths it should accept are between 100us and 70000us (i believe).
 
Reply
#9
No ,a 433 MHz Filter is not sufficient, as OOK modulation of a 433 MHz carrier is used and as we do not deal with sinus wave signals either you could use the 5th or 7th harmonic of a pulse duration, however due to the fact that some devices have a pulse duration of 80 mSec, others of 2mSec and the minimum is approximately 0,15 mSec you face some difficulties with a proper analog circuit design.
IMHO on a Pi2 or Pi3 it is best to operate the LPF in no filter mode as sufficient CPU power is available.

Gesendet von iPhone mit Tapatalk
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Bandpass filter problem mayonezo 13 1,937 01-07-2018, 11:29 PM
Last Post: mayonezo
  Filter kit in 315 receiver? ceandre 1 1,035 04-14-2017, 10:10 PM
Last Post: wo_rasp
  Low Pass Filter and Receiver in Series? re-post Gustavo Woltmann 1 1,163 03-08-2017, 05:25 PM
Last Post: pilino1234
  Filter settings in config.json Saiyato 100 22,409 02-22-2017, 08:24 AM
Last Post: wo_rasp
Rainbow Lowpass filter - how DOES it work? DE8MSH 6 2,632 10-07-2016, 09:25 PM
Last Post: wo_rasp
  Low Pass Filter and Receiver in Series? Hauke 3 2,312 08-30-2016, 08:25 AM
Last Post: wo_rasp
  New filter version curlymo 0 1,211 04-02-2016, 08:05 AM
Last Post: curlymo
  Band-pass filter parts curlymo 60 56,306 01-08-2016, 12:23 AM
Last Post: gneandr
  low pass filter francois.leprieur 3 1,868 12-20-2015, 10:18 AM
Last Post: curlymo
  Low-pass Filter wiring hazzard 4 2,701 11-15-2015, 08:35 AM
Last Post: woutput

Forum Jump:


Browsing: 1 Guest(s)