• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
pilight does no longer start because of hardware error
#1
Hello,
I have pilight 7.0 running since months and years. It ist very stable and does its job.

Now I had to reboot my Pi2 and pilight does no longer work.

I get this error message :

Code:
[Dec 27 09:57:24:453761] pilight-daemon: INFO: rule #1 Subwoofer was parsed in 0.000437 seconds
[Dec 27 09:57:24:454157] pilight-daemon: INFO: rule #2 Drucker was parsed in 0.000323 seconds
[Dec 27 09:57:24:454699] pilight-daemon: INFO: rule #3 Lichterkette1 was parsed in 0.000503 seconds
[Dec 27 09:57:24:455229] pilight-daemon: INFO: rule #4 Lichterkette2 was parsed in 0.000491 seconds
[Dec 27 09:57:24:455627] pilight-daemon: INFO: rule #5 Weihnachtsbaum was parsed in 0.000361 seconds
[Dec 27 09:57:24:456001] pilight-daemon: INFO: rule #6 Regal-Spots was parsed in 0.000338 seconds
[Dec 27 09:57:24:456409] pilight-daemon: INFO: rule #7 Weihnachtsstern was parsed in 0.000372 seconds
[Dec 27 09:57:24:456912] pilight-daemon: INFO: rule #8 Heizdecke was parsed in 0.000466 seconds
[Dec 27 09:57:24:457268] pilight-daemon: INFO: rule #9 Stehlampe was parsed in 0.000321 seconds
[Dec 27 09:57:24:457698] pilight-daemon: INFO: rule #10 Aussenlichterkette was parsed in 0.000393 seconds
[Dec 27 09:57:24:458127] pilight-daemon: INFO: rule #11 Schlafzimmerlampe was parsed in 0.000390 seconds
[Dec 27 09:57:24:458722] pilight-daemon: INFO: rule #12 Treppenhausbeleuchtung was parsed in 0.000555 seconds
[Dec 27 09:57:24:462535] pilight-daemon: INFO: version v7.0
[Dec 27 09:57:24:563127] pilight-daemon: INFO: no pilight daemon found, daemonizing
[Dec 27 09:57:24:563665] pilight-daemon: INFO: daemon listening to port: 5000
[Dec 27 09:57:24:567160] pilight-daemon: INFO: new client, ip: 127.0.0.1, port: 44384
[Dec 27 09:57:24:577513] pilight-daemon: ERROR: hardware not supported
[Dec 27 09:57:24:577580] pilight-daemon: ERROR: could not initialize 433gpio hardware module

This is my config.json


Code:
{
    "devices": {
        "Subwoofer": {
            "protocol": [ "silvercrest" ],
            "id": [{
                "systemcode": 10,
                "unitcode": 29
            }],
            "state": "off"
        },
        "Drucker": {
            "protocol": [ "silvercrest" ],
            "id": [{
                "systemcode": 10,
                "unitcode": 13
            }],
            "state": "off"
        },
        "Lichterkette1": {
            "protocol": [ "silvercrest" ],
            "id": [{
                "systemcode": 10,
                "unitcode": 5
            }],
            "state": "on"
        },
        "Lichterkette2": {
            "protocol": [ "silvercrest" ],
            "id": [{
                "systemcode": 10,
                "unitcode": 21
            }],
            "state": "on"
        },
        "Weihnachtsbaum": {
            "protocol": [ "brennenstuhl" ],
            "id": [{
                "systemcode": 31,
                "unitcode": 1
            }],
            "state": "off"
        },
        "Weihnachtsstern": {
            "protocol": [ "brennenstuhl" ],
            "id": [{
                "systemcode": 31,
                "unitcode": 5
            }],
            "state": "off"
        },
        "Regal-Spots": {
            "protocol": [ "brennenstuhl" ],
            "id": [{
                "systemcode": 6,
                "unitcode": 2
            }],
            "state": "off"
        },
        "Heizdecke": {
            "protocol": [ "brennenstuhl" ],
            "id": [{
                "systemcode": 31,
                "unitcode": 3
            }],
            "state": "on"
        },
        "Stehlampe": {
            "protocol": [ "brennenstuhl" ],
            "id": [{
                "systemcode": 31,
                "unitcode": 4
            }],
            "state": "on"
        },
        "Aussenlichterkette": {
            "protocol": [ "brennenstuhl" ],
            "id": [{
                "systemcode": 31,
                "unitcode": 7
            }],
            "state": "off"
        },
        "Treppenhausbeleuchtung": {
            "protocol": [ "brennenstuhl" ],
            "id": [{
                "systemcode": 31,
                "unitcode": 9
            }],
            "state": "off"
        },
        "Schlafzimmerlampe": {
            "protocol": [ "kaku_dimmer" ],
            "id": [{
                "id": 41,
                "unit": 1
            }],
            "state": "on",
            "dimlevel": 15
        }
    },
    "rules": {
        "Subwoofer": {
            "rule": "IF Subwoofer.state IS on THEN switch DEVICE Subwoofer TO on",
            "active": 1
        },
        "Drucker": {
            "rule": "IF Drucker.state IS on THEN switch DEVICE Drucker TO on",
            "active": 1
        },
        "Lichterkette1": {
            "rule": "IF Lichterkette1.state IS on THEN switch DEVICE Lichterkette1 TO off AFTER 90 MINUTE",
            "active": 1
        },
        "Lichterkette2": {
            "rule": "IF Lichterkette2.state IS on THEN switch DEVICE Lichterkette2 TO off AFTER 90 MINUTE",
            "active": 1
        },
        "Weihnachtsbaum": {
            "rule": "IF Weihnachtsbaum.state IS on THEN switch DEVICE Weihnachtsbaum TO on",
            "active": 1
        },
        "Regal-Spots": {
            "rule": "IF Regal-Spots.state IS on THEN switch DEVICE Regal-Spots TO on",
            "active": 1
        },
        "Weihnachtsstern": {
            "rule": "IF Weihnachtsstern.state IS on THEN switch DEVICE Weihnachtsstern TO on",
            "active": 1
        },
        "Heizdecke": {
            "rule": "IF Heizdecke.state IS on THEN switch DEVICE Heizdecke TO off AFTER 120 MINUTE",
            "active": 1
        },
        "Stehlampe": {
            "rule": "IF Stehlampe.state IS on THEN switch DEVICE Stehlampe TO on",
            "active": 1
        },
        "Aussenlichterkette": {
            "rule": "IF Aussenlichterkette.state IS on THEN switch DEVICE Aussenlichterkette TO on",
            "active": 1
        },
        "Schlafzimmerlampe": {
            "rule": "IF Schlafzimmerlampe.state IS on THEN switch DEVICE Schlafzimmerlampe TO on",
            "active": 1
        },
        "Treppenhausbeleuchtung": {
            "rule": "IF Treppenhausbeleuchtung.state IS on THEN switch DEVICE Treppenhausbeleuchtung TO off AFTER 2 SECOND",
            "active": 1
        }
    },
    "gui": {
        "Treppenhausbeleuchtung": {
            "name": "Treppenhausbeleuchtung",
            "group": [ "Treppenhaus" ],
            "media": [ "all" ],
            "readonly": 0
        },
        "Lichterkette1": {
            "name": "Lichterkette 1",
            "group": [ "Schlafzimmer" ],
            "media": [ "all" ],
            "readonly": 0
        },
        "Lichterkette2": {
            "name": "Lichterkette 2",
            "group": [ "Schlafzimmer" ],
            "media": [ "all" ],
            "readonly": 0
        },
        "Drucker": {
            "name": "Laser Drucker",
            "group": [ "Arbeitszimmer" ],
            "media": [ "all" ],
            "readonly": 0
        },
        "Weihnachtsbaum": {
            "name": "Weihnachtsbaum",
            "group": [ "Esszimmer" ],
            "media": [ "all" ],
            "readonly": 0
        },
        "Regal-Spots": {
            "name": "Regalspots",
            "group": [ "Esszimmer" ],
            "media": [ "all" ],
            "readonly": 0
        },
        "Weihnachtsstern": {
            "name": "Weihnachtsstern",
            "group": [ "Esszimmer" ],
            "media": [ "all" ],
            "readonly": 0
        },
        "Aussenlichterkette": {
            "name": "Aussenlichterkette",
            "group": [ "Esszimmer" ],
            "media": [ "all" ],
            "readonly": 0
        },
        "Heizdecke": {
            "name": "Heizdecke",
            "group": [ "Schlafzimmer" ],
            "media": [ "all" ],
            "readonly": 0
        },
        "Subwoofer": {
            "name": "Subwoofer",
            "group": [ "Wohnzimmer" ],
            "media": [ "all" ],
            "readonly": 0
        },
        "Stehlampe": {
            "name": "Stehlampe",
            "group": [ "Wohnzimmer" ],
            "media": [ "all" ],
            "readonly": 0
        },
        "Schlafzimmerlampe": {
            "name": "Deckenlampe",
            "group": [ "Schlafzimmer" ],
            "media": [ "all" ],
            "readonly": 0
        }
    },
    "settings": {
        "log-level": 6,
        "pid-file": "/var/run/pilight.pid",
        "log-file": "/var/log/pilight.log",
        "webserver-enable": 1,
        "webserver-root": "/usr/local/share/pilight/",
        "webserver-http-port": 5001,
        "webserver-cache": 1,
        "port": 5000
    },
    "hardware": {
        "433gpio": {
            "sender": 0,
            "receiver": 1
        }
    },
    "registry": {
        "pilight": {
            "firmware": {
                "version": 3,
                "lpf": 80,
                "hpf": 16000
            },
            "version": {
                "current": "7.0"
            }
        },
        "webgui": {
            "tabs": 1
        }
    }
}



Obviously the hardware does not seem to work. It is the recommended sender and receiver which I bought here from the forum. I cannot believe that it is broken. What else might be the problem?

Best regards

J
 
Reply
#2
You propably upgraded the kernel in the meanwhile. If so, then there are various topics on this forum about the fixes after a kernel upgrade.
 
Reply
#3
Thanks, I was not aware of this. It seems that I have kernel 4.9 now.
Then a clean install of pilight 8.0 should fix this I guess.
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Starting pilight on boot: "cannot bind to the SSDP multicast network" pilino1234 3 161 08-31-2019, 10:41 PM
Last Post: curlymo
Tongue pilight 8.1.5-1-gc0a175e0 Chrashes fleisch 4 341 08-17-2019, 01:04 PM
Last Post: curlymo
  pilight for Raspbian Buster (raspberry pi 4) ? starob 29 2,012 07-15-2019, 08:45 PM
Last Post: curlymo
  pilight-receive Filteroption not working Alex 2 461 07-14-2019, 08:35 AM
Last Post: Alex
  pilight usb nano format conversion ettman8 2 344 07-14-2019, 08:32 AM
Last Post: curlymo
  pilight 8.1.4 crashes after some hours Ulrich.Arnold 47 2,335 06-29-2019, 08:58 PM
Last Post: curlymo
  Raspberry PI, gpio-ir-tx and pilight not starting lordslash 5 706 06-11-2019, 05:19 PM
Last Post: curlymo
  pilight fails starting on boot Alex 5 622 06-09-2019, 06:02 PM
Last Post: curlymo
  Google Assistant coupled to pilight hansrijn2 4 1,098 05-29-2019, 06:54 PM
Last Post: curlymo
  pilight-send does not stop (terminate) va13 3 603 05-15-2019, 06:06 PM
Last Post: curlymo

Forum Jump:


Browsing: 1 Guest(s)