• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Howto use GT-FSA-04 sockets with GT-3000 remote
#1
Hi,


just want to share my experience with the above device. 


Plug in the socket and within 30 seconds send the following:


Code:
pilight-send -p quigg_gt1000 --id=0 --unit=0 --on
The socket will learn the code (one time send is enough).

For further devices use --unit=1 etc.

config.json:
Code:
               "socket_gt-fsa-04-a": {
                       "protocol": [ "quigg_gt1000" ],
                       "id": [{
                               "id": 0,
                               "unit": 0
                       }],
                       "state": "off"
               }
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Real 433Mhz Remote is disturbed by pilight service henne111 2 134 10-06-2019, 06:18 PM
Last Post: wo_rasp
  Remote with two crystals 10.000mhz and 7.3728 MSTNGSPRTS 0 150 04-18-2019, 10:33 PM
Last Post: MSTNGSPRTS
  [solved] kwmobile: repeating the remote signal doesn't work dawncrow 9 937 10-25-2018, 03:46 PM
Last Post: dawncrow
  deleyCON remote plug socket (arctec_screen_old protocol) itsMe 6 1,181 04-01-2018, 08:35 PM
Last Post: itsMe
Lightbulb pilight not picking up KaKu remote presses rajd 13 5,188 02-07-2017, 02:22 PM
Last Post: wo_rasp
  KaKu ATMT-502 remote & pilight? rajd 4 1,865 11-30-2016, 05:05 PM
Last Post: rajd
  pilight-receive with intertechno ITZ-500 remote control Pik 3 2,303 08-22-2016, 09:16 AM
Last Post: Pik
  KaKu YCT-102 remote unit and id Blacklight 2 1,553 08-14-2016, 08:02 PM
Last Post: Blacklight
Question brennenstuhl RCS 1000SN remote control not recognized by receiver droptix 15 5,251 08-01-2016, 02:06 PM
Last Post: droptix
Tongue Trying to activate relay/gpio with remote control 433 mhz Horst 3 2,435 02-15-2016, 05:35 PM
Last Post: Niek

Forum Jump:


Browsing: 1 Guest(s)