[Yves]

Dears,

I finally received my weather station (was quick 2 weeks)
http://cgi.ebay.fr/ws/eBayISAPI.dll?View...0965084968

To me it looks very similar to the "Three Channel Weather Station" and was expecting to use the threechan protocol.

Unfortunately it's not so easy. What i have checked :
- pilight is able to receive orders sent by a remote to outlet : so pilight and the raspberry are working (long range)
- sensor 1 is able to communicate with the station (so sensor 1 is working).

i don't have a any "Band pass-filter" i plan to add one but it's a long term plan.

Could someone have a look to the raw : http://pastebin.com/xtRrMChn

Do you see other tests or output that i could add here to help ?

[curlymo]

Do you see other tests or output that i could add here to help ?

http://forum.pilight.org/Thread-README-P...r-requests

[Yves]

Thanks curlymo,
i would be glad to post 10 pilight-debug output together with temp and hum info but pilight-debug show nothing actually (even after restarted it several time).
so maybe my receiver is receiving to much noise and can't simply recognize the protocol due to noise...

[curlymo]

If pilight-debug doesn't work, post pilight-raw.

[Yves]

It is on pastebin http://pastebin.com/xtRrMChn

[curlymo]

Temperature / humidity / battery / channel values?

[Yves]

I need to do a new (fresh) extract of pilight-raw (to make it consistent with current values reported by the HW)

---

Ok so http://pastebin.com/riGXBd6R
Temp 18.4° C, HUM 61%, Channel 1, Bat OK

[Yves]

I think that i have more valuable info now with pilight-debug

Code:

T 22.4/Hum 62/BAT OK/CH 1
hardware:       433lirc
pulse:          3
rawlen:         86
binlen:         21
pulselen:       222

Raw code:
666 1776 666 1776 666 3774 666 3774 666 3774 666 3774 666 3774 888 1776 666 3774 888 3552 666 1776 666 1776 666 1776 666 1776 666 1776 666 3774 666 3774 666 3774 666 1776 666 3774 666 1998 666 3774 666 1776 666 3774 666 3774 666 1998 666 3774 666 3774 666 3774 666 1776 666 1776 666 1776 666 3774 666 3774 666 3774 666 1776 666 1998 666 1776 666 3774 666 3774 666 3774 666 1776 666 7548
Binary code:
111111111111111111111

T 22.3/Hum 62/BAT OK/CH 1
hardware:       433lirc
pulse:          3
rawlen:         86
binlen:         21
pulselen:       223

Raw code:
669 1784 669 1784 669 3791 669 3791 669 3791 669 3791 669 3791 669 1784 669 3791 669 3791 669 1784 669 1784 669 1784 669 1784 669 1784 669 1784 669 3791 669 3791 669 1784 669 3791 669 1784 669 3791 669 1784 669 3791 669 3791 669 1784 669 3791 669 3791 669 1784 669 3791 669 1784 669 1784 669 3791 669 3791 669 3791 669 1784 669 2007 669 1784 669 3791 669 1784 669 3791 669 1784 669 7582
Binary code:
111111111111111111111

Full report (with more values) :
http://pastebin.com/7NaW1uTi

I moved from direct GPIO access to Lirc (as recommended in the doc, i missed this info previously)

Make sense that i put more pilight-debug info?

[curlymo]

Make sure there are enough differences in the values. So:
1. 10C, 20C, and 30C
2. -10C and +10C
3. 20C, 21C, 22C
etc.

[Yves]

Ok will try that tomorrow, thanks curlymo