• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ERROR: The Broadcom 2835 GPIO 0 is not set to output mode
#1
Since a recent update from 8.1.4-8-gd702224c to 8.1.4-23-gf6193337 I get the mentioned error when using my 433Mhz module.
The module is connected to a fixed board, so I cannot easily change the used port (wiringpi 1) to test if that helps.
My receiver still works.

After Downgrade to previous version it works again.
Cannot find any helpful hints on the internet or the forum. Any ideas where that comes from?

Message in LOG:

Code:
ERROR: The Broadcom 2835 GPIO 0 is not set to output mode


Installed shown version on raspbian:

Code:
cat /proc/version
Linux version 4.14.98+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 Tue Feb 12 20:11:02 GMT 2019


On Hardware 1B+

Code:
cat /proc/cpuinfo
processor       : 0
model name      : ARMv6-compatible processor rev 7 (v6l)
BogoMIPS        : 697.95
Features        : half thumb fastmult vfp edsp java tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x0
CPU part        : 0xb76
CPU revision    : 7
Hardware        : BCM2835
Revision        : 0010
 
Reply
#2
Code tags please.
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  v8.1.3 compile error without https fourty2 3 246 11-21-2018, 08:02 PM
Last Post: fourty2
  Assert error in v8.1.3-nightly-d2ee2d0d Ulrich.Arnold 4 228 10-24-2018, 09:28 PM
Last Post: curlymo
Bug Bug report: WIFI dongle stops when gpio_switch.gpio = 20 woutput 16 4,204 01-03-2018, 10:11 PM
Last Post: zackdvd
  [solved] Webgui 404-Error PT-Biker 2 691 11-11-2017, 09:49 AM
Last Post: PT-Biker
  Error installing pilight AMWN 2 1,061 11-02-2017, 10:09 PM
Last Post: AMWN
  AdHoc network with 2 Raspberry and 2 GPIO transmitter not working webdandy 29 5,258 09-06-2017, 02:39 PM
Last Post: wseifert
  development, orangepi pc+, "no gpio-platform configured" Twain 1 1,865 06-01-2017, 05:51 PM
Last Post: curlymo
  Relation between raw-output and pulse length TheWheel 9 4,156 12-11-2016, 12:29 PM
Last Post: andies
  Update Error latest Nightly Alex 13 3,408 09-11-2016, 02:51 PM
Last Post: Alex
  Reset of GPIO ports / Detection of mobile phone NormBot 1 1,147 09-02-2016, 08:30 AM
Last Post: wo_rasp

Forum Jump:


Browsing: 1 Guest(s)