• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Solved - On / Off Command is the same command
#11
(07-23-2019, 06:56 AM)curlymo Wrote: It would be great if we could add support by default.

Okay we can do that, but you should know the remote has for every Button another configuration. 

This means for example:

A = id 123456, unit 3, value "state=off"
B = id 123456, unit 1, value "state=on"
C = id 123456, unit 2, value "state=off"
D = id 123456, all 1, value "state=off"

So i've added four different configuration for each button on.

What do you need to add this? 

Regards Manuel
 
Reply
#12
The data as described in the protocol development topics.
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  failed to run command zlin50 4 571 01-03-2020, 10:32 PM
Last Post: zlin50
Question [Solved] Openweathermap with pilight 7.0-40 doesn't work Seebueb 2 946 01-01-2020, 06:45 PM
Last Post: Seebueb
  [Solved] Strange receive problem with 433Mhz Receiver and pilight 8.1.5 vanillaice30 15 2,026 12-18-2019, 11:09 AM
Last Post: vanillaice30
Tongue (solved) pilight 8.1.5-1-gc0a175e0 Chrashes fleisch 5 1,489 10-03-2019, 01:15 PM
Last Post: fleisch
  [solved] kwmobile: repeating the remote signal doesn't work dawncrow 9 1,949 10-25-2018, 03:46 PM
Last Post: dawncrow
  ["SOLVED"] Not able to control intertechno ITR-1500 Kambaramba 12 2,800 10-03-2018, 05:52 PM
Last Post: curlymo
  [solved] raw and debug Traeumer 2 940 09-27-2018, 09:43 PM
Last Post: Traeumer
  [SOLVED] Home Assistant switch gpio segalion 5 1,663 09-10-2018, 12:39 PM
Last Post: segalion
  smtp / solved Traeumer 7 1,369 08-21-2018, 08:47 PM
Last Post: curlymo
  [SOLVED] pilight wont start since update from 8.0.8 to 8.1.2 pukington 5 2,645 08-08-2018, 05:34 PM
Last Post: curlymo

Forum Jump:


Browsing: 1 Guest(s)