• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[Fixed] RaspberryPi4 pilight 8.1.5 - Send isn't working
#1
Hey there,
I've got new RaspberryPi4 with Raspbian Buster software.
I've also installed pilight v8.1.5 and mounted a 433 MHz transmitter.
The  problem is, my device (433 MHz plug) won't switching on, with the pilight webgui or pilight send option. 
With my old raspberry pi 3 it was working fine.
I don't no what to do right know. Is the raspberry pi 4 software not supported?
I hope you can help me Crying

regards
Dominik
 
Reply
#2
Can you post the version of wiringx you've got installed? And did you configure the Raspberry Pi 4 properly in your config?
 
Reply
#3
(10-18-2019, 09:17 PM)curlymo Wrote: Can you post the version of wiringx you've got installed? And did you configure the Raspberry Pi 4 properly in your config?


Hey curlymo thanks for your quick answer  Smile
How can I determine the wiringx version?
I defined raspberry pi 3 in the config.
This is my pilight config:
Code:
{
        "devices": {
                "D1": {
                        "protocol": [ "mumbi" ],
                        "id": [{
                                "systemcode": 31,
                                "unitcode": 1
                        }],
                        "state": "on"
                }
        },
        "rules": {},
        "gui": {
                "D1": {
                        "name": "Steckdose1",
                        "group": [ "Zimmer" ]
                }
        },
        "settings": {
                "log-level": 6,
                "pid-file": "/var/run/pilight.pid",
                "log-file": "/var/log/pilight.log",
                "standalone": 1,
                "port": 6000,
                "webserver-enable": 1,
                "webserver-root": "/usr/local/share/pilight/webgui",
                "webserver-http-port": 6001,
                "webserver-https-port": 6002,
               "webserver-cache": 1,
               "whitelist": "",
               "gpio-platform": "raspberrypi3",
               "ntp-servers": [ "de.pool.ntp.org" ]
       },
       "hardware": {
               "433gpio": {
                       "sender": 0,
                       "receiver": 1
               }
       },
       "registry": {
               "webserver": {
                       "ssl": {
                               "certificate": {
                                       "location": "/etc/pilight/pilight.pem"
                               }
                       }
               },
               "pilight": {
                       "version": {
                               "current": "8.1.5"
                       }
               },
               "hardware": {
                       "RF433": {
                               "mingaplen": 4420,
                               "maxgaplen": 72900,
                               "minrawlen": 26,
                               "maxrawlen": 400
                       }
               }
       }
}
Best regards
Domink
 
Reply
#4
Any idea what could have gone wrong when defining raspberrypi3 on a Raspberry Pi 4?
 
Reply
#5
Thank you very much!!!
Its working now.
I thought that pi3 & pi4 gets the same hardware config.
After restarting it was working Smile

Best regards
Dominik
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  pilight-send seems successful but doesn't actually send RF signal ayeyebrazov 36 1,018 18 minutes ago
Last Post: ayeyebrazov
  After upgrading 7.0 to 8.1.5 my flamingo SF-501P switches stopped working. gerrit312 12 668 03-14-2020, 02:21 PM
Last Post: gerrit312
  pilight 8.1.5 not working on Raspberry pi after reboot beejayf 4 192 03-08-2020, 12:14 AM
Last Post: beejayf
  pilight cpu usage possibly associated with noticeable sluggishness? hepcat72 4 260 01-28-2020, 08:02 PM
Last Post: hepcat72
  apt.pilight.org stable Release' is not signed. thomasol 2 330 01-23-2020, 11:34 PM
Last Post: thomasol
  pilight and SIGNALduino cc1101 Caleus 0 227 01-19-2020, 09:13 AM
Last Post: Caleus
  filter stopped working after update to pilight 8.1.5 zlin50 19 804 01-03-2020, 02:15 PM
Last Post: curlymo
Question [Solved] Openweathermap with pilight 7.0-40 doesn't work Seebueb 2 258 01-01-2020, 06:45 PM
Last Post: Seebueb
  8.1.5 quietly stops working hepcat72 4 309 12-23-2019, 03:24 PM
Last Post: hepcat72
  [Solved] Strange receive problem with 433Mhz Receiver and pilight 8.1.5 vanillaice30 15 970 12-18-2019, 11:09 AM
Last Post: vanillaice30

Forum Jump:


Browsing: 1 Guest(s)