• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
filter stopped working after update to pilight 8.1.5
#11
(01-01-2020, 07:46 PM)curlymo Wrote: Then wait 44 minutes Wink

Here we are - external link this time due to size.
pilight-8.1.5-90-g4ea7576b-raw.output.gz

Receiver's ID is 2, by the way.
 
Reply
#12
Did you also test if the latest nightly has the same reception problem?
 
Reply
#13
(01-01-2020, 08:47 PM)curlymo Wrote: Did you also test if the latest nightly has the same reception problem?

Yes, no complete response for ids 73.0, 136.0, and 147.0 within 120 seconds. Looks very similar to stable.


piilight-daemon -D still gives no feedback about low-pass-filtering.
Is the low pass filter working?
 
Reply
#14
Yes, but I still need to know what specific raw streams I need to look at.
 
Reply
#15
(01-01-2020, 09:08 PM)curlymo Wrote: Yes, but I still need to know what specific raw streams I need to look at.

I hope, this is not a question to me: I have no idea, how that raw stream can be read.
 
Reply
#16
By manually letting the device sent a message of something?
 
Reply
#17
(01-02-2020, 04:57 PM)curlymo Wrote: By manually letting the device sent a message of something?

My transmitting devices are three bought temperature sensors using teknihall protocol. 
That's it. No additional senders available.
 
Reply
#18
So, disable all but one and post the first clear pattern in raw codes you see after enabling the batteries of the last one.
 
Reply
#19
(01-02-2020, 10:46 PM)curlymo Wrote: So, disable all but one and post the first clear pattern in raw codes you see after enabling the batteries of the last one.

Well, I have to correct myself: there are no additional transmitters at *my* site; there are several at my neighbor's, which are also in the logs and can't be eliminated.

But my sensors are the onlz one making use of teknihall-protocol, if that helps.
 
Reply
#20
No, i it doesn't. Sorry.

I need the raw codes so i can mimic the device myself to see if there is actually an issue and where.

The teknihall protocol was a user created one, so i don't know much of the internals.
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  pilight for Raspbian Buster (raspberry pi 4) ? starob 31 7,311 08-04-2020, 06:57 PM
Last Post: PPacman
  pilight switch node in node-red framp 0 239 06-24-2020, 10:01 PM
Last Post: framp
  Update v6 to v8 mamu 2 170 05-31-2020, 09:36 AM
Last Post: mamu
  pilight-control TML 13 907 05-27-2020, 07:51 AM
Last Post: curlymo
  API Requests by HTTP from other devices fore use in pilight scootermacro 2 415 05-10-2020, 08:19 AM
Last Post: scootermacro
  After upgrading 7.0 to 8.1.5 my flamingo SF-501P switches stopped working. gerrit312 23 2,099 04-30-2020, 02:58 PM
Last Post: ayeyebrazov
  tfa30 temperature-offset not working wseifert 2 708 04-09-2020, 02:46 PM
Last Post: curlymo
  pilight-send seems successful but doesn't actually send RF signal ayeyebrazov 37 3,142 03-31-2020, 01:02 PM
Last Post: curlymo
  pilight 8.1.5 not working on Raspberry pi after reboot beejayf 4 852 03-08-2020, 12:14 AM
Last Post: beejayf
  pilight cpu usage possibly associated with noticeable sluggishness? hepcat72 4 907 01-28-2020, 08:02 PM
Last Post: hepcat72

Forum Jump:


Browsing: 1 Guest(s)