• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
raspberry pi 4 config.json
#1
i installed pilight v8.1.5-nightly-38458d69 and wiringPi 2.52 on my Raspberry PI 4 / Buster. The installation worked according to the instructions with no errors. 
If i switch with command pilight-send -p kaku_switch -i... nothing happens, also the pilight-receive command is not working. If i put this SD-Card in my PI3B+ everything works, sending and receiving. I use the same receiver and send-modul.
Code:
{
    "devices": {
        "Switch1": {
            "protocol": [ "kaku_switch" ],
            "id": [{
                "id": 16657026,
                "unit": 0
            }],
            "state": "off"
        },
        "Switch2": {
            "protocol": [ "kaku_switch" ],
            "id": [{
                "id": 16657026,
                "unit": 1
            }],
            "state": "off"
        }
    },
    "rules": {},
    "gui": {
        "Switch1": {
            "name": "Switch Nr 1",
            "group": [ "MeineSwitches" ],
            "media": [ "all" ]
        },
        "Switch2": {
            "name": "Switch Nr 2",
            "group": [ "MeineSwitches" ],
            "media": [ "all" ]
        }
    },
    "settings": {
        "log-level": 6,
        "pid-file": "/var/run/pilight.pid",
        "log-file": "/var/log/pilight.log",
        "standalone": 0,
        "webserver-enable": 1,
        "webserver-root": "/usr/local/share/pilight/webgui",
        "webserver-http-port": 5001,
        "webserver-https-port": 5002,
        "webserver-cache": 1,
        "whitelist": "",
        "gpio-platform": "raspberrypi3"
    },
    "hardware": {
        "433gpio": {
            "sender": 0,
            "receiver": 1
        }
    },
    "registry": {
        "webserver": {
            "ssl": {
                "certificate": {
                    "location": "/etc/pilight/pilight.pem"
                }
            }
        },
        "pilight": {
            "version": {
                "current": "8.1.5"
            }
        },
        "hardware": {
            "RF433": {
                "mingaplen": 4420,
                "maxgaplen": 72900,
                "minrawlen": 26,
                "maxrawlen": 400
            }
        }
    }
}


I attached my config.json. is maybe gpio-platform wrong? Thank you for your help.
 
Reply
#2
What could possibly be the first clue when running on a raspberry pi 4 and having raspberry pi 3 configured?!
 
Reply
#3
omg, i only looked at the supported GPIO platforms (on Configruation - Settings) and missed to try out raspberrypi4. now it worked fine. thank you!
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  pilight 8.1.5 not working on Raspberry pi after reboot beejayf 4 196 03-08-2020, 12:14 AM
Last Post: beejayf
  ERROR: failed to read config. stack: 2 Stefan 6 268 02-03-2020, 09:37 PM
Last Post: curlymo
  Raspberry 4B installation error royw 3 359 12-05-2019, 10:58 AM
Last Post: royw
  pilight for Raspbian Buster (raspberry pi 4) ? starob 29 5,170 07-15-2019, 08:45 PM
Last Post: curlymo
  pilight7_oregon on Raspberry pi3 Tueftler1983 0 336 07-04-2019, 01:49 PM
Last Post: Tueftler1983
  Raspberry PI, gpio-ir-tx and pilight not starting lordslash 5 1,339 06-11-2019, 05:19 PM
Last Post: curlymo
Sad Raspberry Pi: "NOTICE: no pilight ssdp connections found" abusch 8 1,436 04-30-2019, 09:10 PM
Last Post: curlymo
  Config migration from pilight 7 .0 to 8.1.3 "Rules" Nonaamee 4 1,134 11-17-2018, 08:35 PM
Last Post: Nonaamee
  Problem with sending after plight (or raspberry?) update _Jens_ 5 2,404 09-08-2017, 03:14 PM
Last Post: pilino1234
Smile config, device uuid <-> id Twain 2 1,435 06-22-2017, 05:49 PM
Last Post: Twain

Forum Jump:


Browsing: 1 Guest(s)