for the pilight libaries.
I still have 7.0.178-g074447a active running on Rasp 3 .
How may I solve this?
I did not find how to migrate to V8 in the manual or in the wiki.
Can you give me a link to the dokumentation.
I tryed to reinstall the key, but I don't understand the output: root@raspberrypi:/home/pi# wget -O - http://apt.pilight.org/pilight.key | apt-key add -
--2020-11-14 12:59:47-- http://apt.pilight.org/pilight.key
Auflösen des Hostnamen »apt.pilight.org (apt.pilight.org)«... 173.249.23.183
Verbindungsaufbau zu apt.pilight.org (apt.pilight.org)|173.249.23.183|:80... verbunden.
HTTP-Anforderung gesendet, warte auf Antwort... 301 Moved Permanently
Platz: https://apt.pilight.org/pilight.key[folge]
--2020-11-14 12:59:47-- https://apt.pilight.org/pilight.key
Verbindungsaufbau zu apt.pilight.org (apt.pilight.org)|173.249.23.183|:443... verbunden.
HTTP-Anforderung gesendet, warte auf Antwort... 200 OK
Länge: 3079 (3,0K) [application/octet-stream]
In »»STDOUT«« speichern.
100%[======================================>] 3.079 --.-K/s in 0s
2020-11-14 12:59:52 (6,54 MB/s) - auf die Standardausgabe geschrieben [3079/3079]
OK
May be this shows my problem. Should I change in sources.list also to https ?
Hallo,
I upgraded the base system to buster, but the problem with the pilight Moved Permanently problem is not solved. My base installation had been weezy.
Any tips how to solve the problem or is a new installation buster and pilight 8 the only solution?
Best regards,
Rschnauzerb
I stopped searching for a solution and installed a new system, buster with pilight release 8.
After changing the different syntax changes in the rules section the system is working.
The old wheezy configuration had been damaged by trying to dist-upgrade to newer releases. Maybe because pilight forces now https software loads and I did not realize that in some upgrade commands.