[jpoilux]

Is there a possibility to receive data from Oregon THGR122NX sensor ?
Thanks

[curlymo]

Can you post a pilight-debug output for this sensor?

---

@Bram1337, a description of the protocol can be found here: http://wmrx00.sourceforge.net/Arduino/Or...tocols.pdf

[jpoilux]

Mmmm, okay,

I search how to do that

Edit:
I have found the command "sudo ~/pilight/pilight-debug".
I do that after work

[Bram]

Seems it is using Manchester just like Cresta. I will work on that another time as I have the sensor already but still have to make more adjustments to daemon.c than expected.

[curlymo]

@Bram1337, can you open a topic on the Manchester specifics that currently aren't supported so i can think with you.

[jpoilux]

Mmmm,

like this thread: http://www.pilight.org/showthread.php?tid=339
I've nothing with pilight-debug.
My sensor seems to be the same.

[Bram]

If I or someone gets Cresta to work we will most likely also get this one to work.

@CurlyMo I will open a new thread to build support for manchester encoding when I know a bit more about it.

[migube]

Through the following links RF transmission protocols descriptions can be found:
Oregon scientific:
Detailed description of V1, V2, V3 protocols:

http://wmrx00.sourceforge.net/Arduino/Or...tocols.pdf

Decoding of the V2 protocol links to jeenode/arduino/atmel code:

http://jeelabs.net/projects/cafe/wiki/De...2_protocol

[curlymo]

Still, i first need a pilight-debug or raw output.

[1000io]

Hi all,

I've found this project: http://www.disk91.com/2013/technology/ha...pberry-pi/

And I got to reproduce it, compile and it works.

Maybe this can help you.