• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 1 Vote(s) - 1 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Relation between raw-output and pulse length
#3
curlymo Wrote:The footer of the code devided by 34 is the pulse length

Thanks for the prompt reply!

I don't know what the "footer" is. I'm trying to find out the relation between raw-output and pulses I see on my scope so I can do calculations for a filter (and a bit of trail-and-error configuring).

There must be some looping or timing in the C-code to measure the time between the up- and down- flank of a pulse which results in a numeric representation for pilight-raw..(I think).

Thanks again..
 
Reply
  


Messages In This Thread
RE: Relation between raw-output and pulse length - by TheWheel - 11-28-2013, 11:29 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  ERROR: The Broadcom 2835 GPIO 0 is not set to output mode stuckinger 10 1,724 05-07-2019, 09:11 PM
Last Post: curlymo
  Start command/script on pulse receive wous 10 10,758 12-24-2013, 09:39 PM
Last Post: bultje76

Forum Jump:


Browsing: 1 Guest(s)