• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register

Thread Rating:
  • 1 Vote(s) - 1 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Relation between raw-output and pulse length
I just found this
(12-11-2013, 07:07 PM)mercurio. Wrote: so the procedure is the following:

you always fill a buffer with the last let's say 32 pulses.
then you analyze it and if the last pulse is somewhat around 4440us or bigger you divide it by 34. this way you get the pulse length.
then you check if it's valid for some protocol.
if it's valid you use it to analyze the rest of the 32 pulses and get the command.
(the footer pulse is the last one) and it seems now (for me) that both stories converge.

Messages In This Thread
RE: Relation between raw-output and pulse length - by andies - 12-11-2016, 12:29 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  ERROR: The Broadcom 2835 GPIO 0 is not set to output mode stuckinger 10 1,724 05-07-2019, 09:11 PM
Last Post: curlymo
  Start command/script on pulse receive wous 10 10,758 12-24-2013, 09:39 PM
Last Post: bultje76

Forum Jump:

Browsing: 1 Guest(s)