• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


[Work in Progress] Rev Ritter
#1
Hi all,

Is it possible to support "yet" another brand of switches?

I bought a nice set of Rev Ritter ones.

Raw is perfectly working, maybe others are also looking into these.

Thanks in advance and keep up the good work,

Edward

Code:
Details:
Code from the remote: 0563 (3 remote switches, www.rev.biz)
Also has a label of Intertek on it.
Switch type 8342-BHC Art. Nr. 00834514

This is the output of pilight-debug
Code:
--[RESULTS]--


pulse:          3
rawlen:         50
binlen:         12
plslen:         169

on-off bit(s):  10 11
all bit(s):
unit bit(s):    8 9

Raw code:
169 676 169 676 169 676 169 676 169 676 507 338 169 676 507 169 169 676 507 338 169 676 507 338 169 676 507 338 507 338 507 338 169 676 169 676 169 676 169 676 169 676 169 676 507 338 507 338 169 5746
Raw simplified:
On:     01010101011001100110011001100110010110100101101001
Off:    01010101011001100110011001100110010110100101101001
All:    01010101011001100110011001100110010110101010010101
Unit 1: 01010101011001100110011001100110010110100101101001
Unit 2: 01010101011001100110011001100110101001010101101001
Unit 3: 01010101011001100110011001101010010101010101101001
Binary code:
On:     110000001010
Off:    110000001001
All:    110000001001
Unit 1: 110000001010
Unit 2: 110000000110
Unit 3: 110000001110
 
Reply
#2
Can you please read a little and use the Protocol Development next time.
 
Reply
#3
Can you post some pilight-debug outputs and tell me what buttons and states they represent?
 
Reply
#4
Thanks Curlymo,

This is the output of the rev-ritter remote, (no 0563 is probably the internal code).
It has 3 on/off buttons.
In debug mode, on 1. I pressed the 1off, then on 2. the 1on
on 3. 1off, 4. button 3on, 5. button 2on, 6. button 1on

Code:
Used set for transmission and reception: http://dx.com/p/433mhz-rf-transmitter-module-receiver-module-link-kit-for-arduino-arm-mcu-wl-green-220194
And homemade antenna from excellent tutorial: http://www.google.be/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&ved=0CDIQFjAA&url=http%3A%2F%2Fwww.elektor.nl%2FStreamFile.lynkx%3Fpath%3DUploads%2FForum%2FPosts%2FHow-to-make-a-Air-Cooled-433MHz-antenna.pdf&ei=ZnejUs-AAsfhywO77YDYAg&usg=AFQjCNGjUsPCEtEBwGWkiUxABzpuTFT8xQ&bvm=bv.57752919,d.bGQ
The Rev-Ritter set on Ebay: http://www.ebay.nl/itm/400546222521?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

Code:
Please make sure the daemon is not running when using this debugger.

1. Please send and hold one of the OFF buttons. Done.

2. Please send and hold the ON button for the same device
   as for which you send the previous OFF button. Done.

3. Please send and hold (one of the) ALL buttons.
   If you're remote doesn't support turning ON or OFF
   all devices at once, press the same OFF button as in
   the beginning. Done.

4. Please send and hold the ON button with the lowest ID. Done.

5. Please send and hold the ON button with the second to lowest ID. Done.

6. Please send and hold the ON button with the highest ID.^Croot@b-electronica:/etc/pilight# pilight-learn
Please make sure the daemon is not running when using this debugger.

1. Please send and hold one of the OFF buttons. Done.

2. Please send and hold the ON button for the same device
   as for which you send the previous OFF button. Done.

3. Please send and hold (one of the) ALL buttons.
   If you're remote doesn't support turning ON or OFF
   all devices at once, press the same OFF button as in
   the beginning. Done.

4. Please send and hold the ON button with the lowest ID. Done.

5. Please send and hold the ON button with the second to lowest ID. Done.

6. Please send and hold the ON button with the highest ID. Done.

--[RESULTS]--
[code]
pulse:          3
rawlen:         50
binlen:         12
plslen:         170

on-off bit(s):  10 11
all bit(s):
unit bit(s):    8 9

Raw code:
170 680 170 680 170 680 170 680 170 680 510 170 170 680 510 170 170 680 510 170 170 680 510 170 170 680 510 170 170 680 510 340 170 680 170 680 510 170 510 170 170 680 170 680 510 340 510 170 170 5780
Raw simplified:
On:     01010101011001100110011001100110010110100101101001
Off:    01010101011001100110011001100110010110100101101001
All:    01010101011001100110011001100110010110101010010101
Unit 1: 01010101011001100110011001101010010101010101101001
Unit 2: 01010101011001100110011001100110101001010101101001
Unit 3: 01010101011001100110011001100110010110100101101001
Binary code:
On:     110000001010
Off:    110000001001
All:    110000001001
Unit 1: 110000001110
Unit 2: 110000000110
Unit 3: 110000001010
 
Reply
#5
You already posted pilight-learn output, i need pilight-debug output.

Regarding the antenna, can you post your experiences with pictures in the Antenna thread?
 
Reply
#6
I am also search a REV protocol.Smile
Here the debugcode : http://pastebin.com/j8Jjankw
It is an old system that i use about 10 years.Wink
There is a 6 x micro switch -> 6 different units possible.
The remote has 4x on and 4x off switch.
http://www2.produktinfo.c...-de-Funkfernbedienung.pdf

Ben
 
Reply
#7
The link doesn't work...
 
Reply
#8
http://www2.produktinfo.conrad.de/datenb...ienung.pdf
 
Reply
#9
Confused
Nobody ???? Blush

I need some switches, Chrismas LightsTired
 
Reply
#10
I need some time Wink
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Smartwares switch SH5-RBU-04A and SH5-RBS-04A doesn't work with 8.0.3 flying_dutchman 51 16,435 05-22-2019, 11:16 AM
Last Post: bitboy
  [Work in progress] somfy controller sandoz 128 54,630 05-06-2017, 10:38 AM
Last Post: wo_rasp

Forum Jump:


Browsing: 1 Guest(s)