• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


[Fully Supported] Kaku Door sensor (AMST-606)
#11
Can you continue on git please.
 
Reply
#12
Fully supported
https://github.com/pilight/pilight/pull/59
 
Reply
#13
Hi All ! i have received a kaku amst-606.

but i cant get it working. can anybody help me to get the contact sensor working?
 
Reply
#14
Can a KAKU switch (like the AC-1000 or APA3-1500R) receive the signal ?
 
Reply
#15
Contact sensors only send signals.
 
Reply
#16
how can i get it work?

i could not integrate it. is anybody here using this contact sensors ?
 
Reply
#17
(08-07-2014, 09:38 AM)curlymo Wrote: Contact sensors only send signals.
Correct, and the AMST-606 is supposed to work together with the switch, thus before we start debuggung pilight i would like to know if it works together with original hardware, in order to rule out faulty AMST-606 hardware.
 
Reply
#18
hi !

this is my pilight-debug.

I cant get it working.

Code:
--[ON]--
hardware:       433gpio
pulse:          4
rawlen:         148
binlen:         37
pulselen:       304

Raw code:
304 2736 304 304 304 1216 304 304 304 1216 304 1216 304 304 304 1216 304 304 304 304 304 1216 304 304 304 1216 304 1216 304 304 304 1216 304 304 304 1216 304 304 304 1216 304 304 304 1216 304 304 304 1216 304 304 304 304 304 1216 304 1216 304 304 304 1216 304 304 304 304 304 1216 304 1216 304 304 304 1216 304 304 304 304 304 1216 304 304 304 1216 304 1216 304 304 304 304 304 1216 304 304 304 1216 304 304 304 1216 304 1216 304 304 304 304 304 1216 304 304 304 1216 304 1216 304 304 304 1216 304 304 304 304 304 1216 304 304 304 1216 304 1216 304 304 304 1216 304 304 304 1216 304 304 304 304 304 1216 304 1216 304 304 304 10336
Binary code:
0011001111110110110010001001100111011



--[OFF]--
hardware:       433gpio
pulse:          4
rawlen:         132
binlen:         33
pulselen:       306

Raw code:
306 2754 306 306 306 1224 306 306 306 1224 306 1224 306 306 306 1224 306 306 306 306 306 1224 306 306 306 1224 306 1224 306 306 306 1224 306 306 306 1224 306 306 306 1224 306 306 306 1224 306 306 306 1224 306 306 306 306 306 1224 306 1224 306 306 306 1224 306 306 306 306 306 1224 306 1224 306 306 306 1224 306 306 306 306 306 1224 306 306 306 1224 306 1224 306 306 306 306 306 1224 306 306 306 1224 306 306 306 1224 306 1224 306 306 306 306 306 1224 306 306 306 1224 306 306 306 1224 306 1224 306 306 306 306 306 1224 306 306 306 1224 306 1224 306 306 306 10404
Binary code:
001100111111011011001000100010011

it is a COCO AMST-606 in pilight receive i receive the same like in the first post. just with other unit and id
 
Reply
#19
Using that raw code I get
Code:
"code": {
                "id": 13622050,
                "unit": 9,
                "dimlevel": 13,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "arctech_dimmer",
        "uuid": "0000-00-00-00-4a646b",
        "repeats": 1
}
If pilight-receive is not working:
- Can you please post your settings.json.
- Can you please post the output from "pilight-daemon -V".
What is now your problem ?
- Can you please be a bit more specific on what's not working.
 
Reply
#20
wo_rasp,

a cross post from another thread, this is what I get when using the 606
Remove contacts from eachother; around 25 repeats of the following data.
Code:
pilight-daemon: DEBUG: called arctech_dimmer parseBinary()
pilight-daemon: DEBUG: broadcasted: {"code":{"id":14143926,"unit":9,"dimlevel":9,"state":"on"},"origin":"receiver","protocol":"arctech_dimmer","uuid":"0000-00-00-7f-bc2d05","repeats":3}

Put the contacts back together, around 24 repeats of the following data:
Code:
pilight-daemon: DEBUG: called arctech_switch parseBinary()
pilight-daemon: DEBUG: called arctech_screen parseBinary()
pilight-daemon: DEBUG: socket write succeeded: {"origin":"config","type":1,"devices":{"gang":[ "Sensor1" ]},"values":{"timestamp":1405269934,"state":"off"}}

pilight-daemon: DEBUG: broadcasted: {"origin":"config","type":1,"devices":{"gang":[ "Sensor1" ]},"values":{"timestamp":1405269934,"state":"off"}}
pilight-daemon: DEBUG: broadcasted: {"code":{"id":14143926,"unit":9,"state":"off"},"origin":"receiver","protocol":"arctech_switch","uuid":"0000-00-00-7f-bc2d05","repeats":14}
pilight-daemon: DEBUG: socket write succeeded: {"origin":"config","type":5,"devices":{"gang":[ "Sensor1" ]},"values":{"timestamp":1405269934,"state":"down"}}

pilight-daemon: DEBUG: broadcasted: {"origin":"config","type":5,"devices":{"gang":[ "Sensor1" ]},"values":{"timestamp":1405269934,"state":"down"}}
pilight-daemon: DEBUG: broadcasted: {"code":{"id":14143926,"unit":9,"state":"down"},"origin":"receiver","protocol":"arctech_screen","uuid":"0000-00-00-7f-bc2d05","repeats":14}
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Digoo / Baldr / Nexus / Rubicson temperature/humidity sensor thielj 4 1,438 09-30-2019, 04:48 PM
Last Post: curlymo
  433MHz PIR sensor from Amazon ha_username 0 116 09-29-2019, 11:44 PM
Last Post: ha_username
  [Partially Supported] TFA / Conrad Weather Yves 184 12,257 03-31-2019, 05:22 PM
Last Post: curlymo
  gs-iwds07 window sensor Loggisch 46 13,035 01-02-2019, 09:11 PM
Last Post: curlymo
  [Fully Supported] DHT22 IcedEarth 86 31,879 11-18-2018, 09:33 AM
Last Post: curlymo
  Pearl weatherstation sensor for FWS-686 & FWS-665 chklump 13 4,783 08-12-2018, 05:34 PM
Last Post: fourty2
  TFA 30.3160 Pool Sensor wseifert 4 933 05-30-2018, 09:24 AM
Last Post: wseifert
  [Fully Supported] Arctech Old Martin 111 35,816 03-27-2018, 04:43 PM
Last Post: genfersee
Lightbulb BH1750 i2c digital illuminance sensor marcm 14 3,714 02-25-2018, 08:40 PM
Last Post: morph027
  [Fully Supported] Clarus Switches Marcin 69 24,749 01-30-2018, 07:10 PM
Last Post: Niek

Forum Jump:


Browsing: 1 Guest(s)