• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


[Fully Supported] Kaku Door sensor (AMST-606)
#51
Nope, all due to interference in 433.92Mhz world.
 
Reply
#52
I'm new in connecting seperate hardware to my Raspberry Pi 3 (model 1b+) and I have the Sender and Receiver kit of pilight and I can receive (with pilight-receive) whatever I send (with pilight-send). I have pilight version v8.1.5. But somehow I don't receive any signal of my Kaku Door Sensor AMST-606. Not by using pilight-receive neither by using pilight-raw. What am I doing wrong here? What am I missing out? My door sensor successfully let my chime ring, so it's sending out something. I also have my video doorbell on 433mhz, but that one also isn't detected, but that's my next topic after this one.

Code:
{
    "devices": {
        "garage_door": {
            "protocol": [ "kaku_contact" ],
            "id": [{
                "id": 100,
                "unit": 0
            }],
            "state": "closed"
        }
    },
    "rules": {},
    "gui": {
        "garage_door": {
            "name": "Garagedeur",
            "group": [ "deuren", "garage" ],
            "media": [ "all" ]
        }
    },
    "settings": {
        "log-level": 6,
        "pid-file": "/var/run/pilight.pid",
        "log-file": "/var/log/pilight.log",
        "standalone": 0,
        "webserver-enable": 1,
        "webserver-root": "/usr/local/share/pilight/webgui",
        "webserver-http-port": 5001,
        "webserver-https-port": 5002,
        "webserver-cache": 1,
        "whitelist": "",
        "gpio-platform": "raspberrypi3"
    },
    "hardware": {
        "433gpio": {
            "sender": 0,
            "receiver": 1
        }
    },
    "registry": {
        "hardware": {
            "RF433": {
                "mingaplen": 0,
                "maxgaplen": 99999,
                "minrawlen": 0,
                "maxrawlen": 4096
            }
        }
    }
}

Test to check if the sender and receiver all work was successful:
Code:
pi@raspberrypi:/etc/pilight $ sudo pilight-send -p kaku_switch -i 1 -u 1 -t -l

Code:
pi@raspberrypi:~ $ sudo pilight-receive
{  
    "origin": "sender",
    "protocol": "arctech_switch",
    "message": {
        "id": 1,
        "unit": 1,
        "state": "on"
    },
    "repeat": 1,
    "uuid": "0000-b8-27-eb-73c962"
}
 
Reply
#53
You're sender isn't connected properly, because what you see is pilight telling you it sent a code, not that it received one.
 
Reply
#54
I don't quite understand your answer.
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Digoo / Baldr / Nexus / Rubicson temperature/humidity sensor thielj 4 1,438 09-30-2019, 04:48 PM
Last Post: curlymo
  433MHz PIR sensor from Amazon ha_username 0 116 09-29-2019, 11:44 PM
Last Post: ha_username
  [Partially Supported] TFA / Conrad Weather Yves 184 12,257 03-31-2019, 05:22 PM
Last Post: curlymo
  gs-iwds07 window sensor Loggisch 46 13,035 01-02-2019, 09:11 PM
Last Post: curlymo
  [Fully Supported] DHT22 IcedEarth 86 31,879 11-18-2018, 09:33 AM
Last Post: curlymo
  Pearl weatherstation sensor for FWS-686 & FWS-665 chklump 13 4,783 08-12-2018, 05:34 PM
Last Post: fourty2
  TFA 30.3160 Pool Sensor wseifert 4 933 05-30-2018, 09:24 AM
Last Post: wseifert
  [Fully Supported] Arctech Old Martin 111 35,816 03-27-2018, 04:43 PM
Last Post: genfersee
Lightbulb BH1750 i2c digital illuminance sensor marcm 14 3,714 02-25-2018, 08:40 PM
Last Post: morph027
  [Fully Supported] Clarus Switches Marcin 69 24,748 01-30-2018, 07:10 PM
Last Post: Niek

Forum Jump:


Browsing: 2 Guest(s)