• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
KAKU PAR-1000/PAT-103
#11
But how it's possible the receiver is receiving?

For example, some output from the pilight-receive:
Code:
{
        "code": {
                "systemcode": 20,
                "programcode": 19,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "impuls",
        "uuid": "033D-00-00-3D-000300",
        "repeats": 1
}
{
        "code": {
                "systemcode": 20,
                "programcode": 19,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "impuls",
        "uuid": "033D-00-00-3D-000300",
        "repeats": 1
}
{
        "code": {
                "systemcode": 3,
                "programcode": 6,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "impuls",
        "uuid": "033D-00-00-3D-000300",
        "repeats": 1
}
{
        "code": {
                "systemcode": 3,
                "programcode": 6,
                "state": "on"
        },
        "origin": "receiver",
        "protocol": "impuls",
        "uuid": "033D-00-00-3D-000300",
        "repeats": 1
}
{
        "code": {
                "id": "F0",
                "unit": 29,
                "state": "off"
        },
        "origin": "receiver",
        "protocol": "rev_switch",
        "uuid": "033D-00-00-3D-000300",
        "repeats": 1
}
 
Reply
#12
Can you try pilight-debug?
 
Reply
#13
Unfortunately the same error.
Code:
[Mar 03 21:32:11:714666] pilight-debug: ERROR: could not open /dev/lirc0
[Mar 03 21:32:11:716207] pilight-debug: ERROR: could not initialize 433lirc hardware mode

edit: my bad, changed it.
 
Reply
#14
Can you try pilight-debug with gpio hardware mode?
 
Reply
#15
pilight will not start at this moment.
Code:
[....] Starting : pilightgpio: Unable to open GPIO direction interface for pin 17: No such file or directory

Is it probably because of assigning the pin to lirc?
I can't look into it right now. Will continue later this week. Thanks for your help so far!
 
Reply
#16
Indeed, due to the lirc_rpi module.
 
Reply
#17
When I try pilight-debug with gpio hardware mode, the pilight-debug is starting. But when I press the button on the remote it's not responding. Any suggestions?
 
Reply
#18
If pilight-raw isn't working and you are sure your connections are right then maybe you're receiver is broken.
 
Reply
#19
Did you stop the pilight service before running pilight-debug? Did you try restarting pilight-debug once or twice to see if receiving started working?
 
Reply
#20
Hi there,
i got the same experience with an Intertechno ITT-1500 Remote.
pilight-raw shows a flood of figures, aber pilight-debug never shows an output. Dosen't matter how often i restart it.
I am using one of the cheap rf link receivers from ebay:
http://www.ebay.de/itm/433Mhz-RF-Wireles...3f316fee01

Maybe cheap and limited in range but i definately know that it is working, because i used it in a similiar arduino project to read the ID of the ITT-1500.

I have absolutely no clue why it does not work with the RPi and pilight. Till now i have only tried the gpio mode. Didnt had the time to get Lirc Mode running under Raspbian.
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Unable to get pilight working with kaku APA3-1500r MuadDev 0 913 02-11-2018, 03:51 PM
Last Post: MuadDev
  Motion Sensors... (KAKU, Trust...), what now? haboku 1 1,057 09-27-2017, 02:26 PM
Last Post: pilino1234
  KAKU ALED-2009/ALED-2709 martijnhv 1 1,197 05-18-2017, 08:55 PM
Last Post: pilino1234
Lightbulb pilight not picking up KaKu remote presses rajd 13 6,592 02-07-2017, 02:22 PM
Last Post: wo_rasp
  KaKu ATMT-502 remote & pilight? rajd 4 2,497 11-30-2016, 05:05 PM
Last Post: rajd
  kaku amst-606 limited range dicenl 5 2,232 11-16-2016, 07:51 PM
Last Post: dicenl
  Getting started with 433mhz / Kaku / Arduino nano rajd 0 1,861 10-25-2016, 11:30 PM
Last Post: rajd
  KaKu YCT-102 remote unit and id Blacklight 2 1,954 08-14-2016, 08:02 PM
Last Post: Blacklight
  Kaku doorbell Joeks 0 1,249 04-22-2016, 11:43 AM
Last Post: Joeks
  Brennenstuhl RCS 1000 N correct codes? timk 2 2,382 12-08-2015, 07:28 PM
Last Post: timk

Forum Jump:


Browsing: 1 Guest(s)