• 10 dec 2017: forum version update. In case of issues use this topic.
  • 30 nov 2017: pilight moved servers. In case of issues use this topic.
Hello There, Guest! Login Register


Thread Rating:
  • 1 Vote(s) - 2 Average
  • 1
  • 2
  • 3
  • 4
  • 5
pilight 4.0 RC
#1
pilight 4.0 has been put in the developmental repository.
 
Reply
#2
Is this the place to report bugs? If so, when i call pilight-send, i now get a segmentation error:
Code:
pi@raspberrypi ~ $ pilight-send
Segmentatiefout
And i see some (as far as i can tell) weird things when i start pilight-daemon by hand:
Code:
[ Apr 23 23:03:22:78415] pilight-daemon: DEBUG: new thread 433gpio, 7 threads running
[ Apr 23 23:03:22:79221] pilight-daemon: INFO: new client, ip: 127.0.0.1, port: 55407
[ Apr 23 23:03:22:79468] pilight-daemon: DEBUG: client fd: 9
[ Apr 23 23:03:22:79701] pilight-daemon: DEBUG: client id: 1
[Apr 23 23:04:01:632386] pilight-daemon: DEBUG: called arctech_screens_old parseBinary()
[Apr 23 23:04:01:634712] pilight-daemon: DEBUG: broadcasted: {"code":{"id":0,"unit":0,"state":"down"},"origin":"receiver","protocol":"arctech_screens_old","uuid":"0000-00-00-5a-c91ce9","repeats":1}
[Apr 23 23:04:01:636077] pilight-daemon: DEBUG: broadcasted: {"code":{"id":0,"unit":0,"state":"off"},"origin":"receiver","protocol":"arctech_switches_old","uuid":"0000-00-00-5a-c91ce9","repeats":1}
[Apr 23 23:04:16:537462] pilight-daemon: DEBUG: caught minimum # of repeats 1 of conrad_rsl_switch
[Apr 23 23:04:16:537726] pilight-daemon: DEBUG: called conrad_rsl_switch parseCode()
[ Apr 23 23:04:53:78836] pilight-daemon: DEBUG: called rev_switch_old parseBinary()
[ Apr 23 23:04:53:80439] pilight-daemon: DEBUG: broadcasted: {"code":{"id":0,"unit":0,"state":"off"},"origin":"receiver","protocol":"rev_switch_old","uuid":"0000-00-00-5a-c91ce9","repeats":1}
[Apr 23 23:05:19:271146] pilight-daemon: DEBUG: caught minimum # of repeats 1 of clarus_switch
[Apr 23 23:05:19:271422] pilight-daemon: DEBUG: called clarus_switch parseCode()
[Apr 23 23:05:19:273140] pilight-daemon: DEBUG: broadcasted: {"code":{"id":"F0","unit":0,"state":"off"},"origin":"receiver","protocol":"clarus_switch","uuid":"0000-00-00-5a-c91ce9","repeats":1}
[Apr 23 23:05:19:274294] pilight-daemon: DEBUG: broadcasted: {"code":{"id":"F0","unit":0,"state":"off"},"origin":"receiver","protocol":"rev_switch","uuid":"0000-00-00-5a-c91ce9","repeats":1}
 
Reply
#3
What wierd things?

Thanks for the segmentation fault bug.
 
Reply
#4
(04-23-2014, 10:23 PM)curlymo Wrote: What wierd things?

Thanks for the segmentation fault bug.
The broadcast lines, that says that pilight is broadcasting that right? If so, that would be weird, i'm not sending that.

Ok, and. another thing i'm noticing. I have set-up gpio as hardware receiver. When i use pilight-raw, i get a bunch of numbers, so it seems to be working.
Code:
433gpio: 24049
433gpio: 828
433gpio: 95247
433gpio: 27836
433gpio: 113
433gpio: 122
433gpio: 162
433gpio: 136963
433gpio: 119
433gpio: 439
433gpio: 50247
433gpio: 29035
433gpio: 139
433gpio: 10693
433gpio: 117
433gpio: 211
433gpio: 89
But, if i start pilight as daemon. Nothing is coming trough via pilight-receive. It stays queiet. My remote for example doesnt get noticed.
 
Reply
#5
Will investigate. The false positives can be due to noise.
 
Reply
#6
The bugs mentioned here are fixed on git. I shall make a new dev later today.

New deb has been put online. Reinstall by using:
Code:
apt-get update
apt-get install pilight --reinstall
 
Reply
#7
Segmentation fault is gone Smile
 
Reply
#8
If nothing more shows up, i will release pilight 4.0 soon as stable.
 
Reply
#9
Installed version 4.0 today and experienced no problems at all :-)
 
Reply
#10
My software connects via python to the pilight TCP port. As starting point i used the example python file. That worked fine up until version 3.0. It seems like it doesn't do so on pilight 4.0. For starters it does not recognise the "Client connected" reply message, and i get some empty lines.

Is something changed there? If so, the python example hasn't.
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  pilight-debug format Rschnauzer 2 181 12-17-2020, 07:09 PM
Last Post: Rschnauzer
  pilight-flash not working danny 14 2,358 12-12-2020, 10:00 AM
Last Post: tox
  pilight does not start, Deamon is not found. Dekkertje 6 275 12-08-2020, 06:55 PM
Last Post: Dekkertje
  Failed pilight-send that say they succeeded hepcat72 2 182 12-05-2020, 05:30 PM
Last Post: hepcat72
  apt.pilight.org/dists/stable/main/binary 301 Moved Permanently Rschnauzer 6 424 11-23-2020, 01:49 PM
Last Post: Rschnauzer
  bridging pilight and mosquitto hansrijn2 5 665 10-26-2020, 06:31 PM
Last Post: hansrijn2
  problem publish to pilight MQTT server Emiks5 4 868 08-31-2020, 07:45 PM
Last Post: Emiks5
  pilight for Raspbian Buster (raspberry pi 4) ? starob 32 11,831 08-10-2020, 09:12 AM
Last Post: simanuel
  pilight switch node in node-red framp 0 738 06-24-2020, 10:01 PM
Last Post: framp
  pilight-control TML 13 2,256 05-27-2020, 07:51 AM
Last Post: curlymo

Forum Jump:


Browsing: 1 Guest(s)