[janneman]

I have a set of promax switches and remote. The switches have a fixed address. (no learn)
It looks like this set uses homeeasy_old protocol. However the state is inverted. Instead of 0-off and 1-on this is inverted.
Would it be possible to be able to specify this when configuring these switches?

[curlymo]

So, when taken this inversion into account it works?

[janneman]

How could i test that? Should i send some debug log of pilight-debug?

[curlymo]

Try to send an off command to turn the outlets and on vice versa.

[curlymo]

Any updates?

[jongep86]

Hi

today I picked up some new, cheap, remote from the Action.
I think the model is Pro Max.
See here, supported by RFLink:
https://www.domoticz.com/forum/viewtopic...6&start=20

They look the same as the image in that first post.
The Description of the action is Flamingo Switch Set, homewizard compatible

The device itself are Flamingo SF-501 Control and a SF-501 Switch
A link to http://www.smartwares.eu/ (500 internal error atm)
The are 'learning' so without physical switches.

I can't get them working

For A-ON.

Code:

time:           Sat Dec 17 18:13:35 2016
hardware:       433gpio
pulse:          8
rawlen:         103
pulselen:       1399

Raw code:
28773 17097 417 13900 417 139 417 139 417 5977 417 3197 417 139 417 46009 139 278 139 417 20433 278 139 278 24881 139 14734 834 27939 278 139 1390 4726 139 1390 278 417 139 1251 278 278 139 973 139 278 139 973 5282 556 16819 834 10147 834 139 417 13066 417 278 417 15707 417 139 417 278 1390 139 417 139 1390 139 1390 139 417 139 1390 139 5421 16263 278 139 417 4031 12232 4309 139 695 27939 556 8757 278 139 417 139 556 15846 278 139 417 8062 417 5838 1112 47538

time:           Sat Dec 17 18:14:37 2016
hardware:       433gpio
pulse:          34
rawlen:         42
pulselen:       164

Raw code:
4128 608 81264 176 84432 224 42000 2496 416 9440 31840 192 35040 512 16176 13280 134592 53824 784 44448 256 15920 432 368 54256 480 2544 12192 128 128 256 13872 2720 128 121392 176 21248 624 66000 28080 544 5600

[schorsch]

today i've also bought a set of these.
Is there any update on these?
Is there anything i can contribute?